The effects of sample preparation methods on the variability of the electrospray ionization response for model drug compounds

A post-column infusion system was developed in order to analyze suppression of electrospray ionization (ESI) tandem mass spectrometry response in the presence of endogenous plasma interferences. By enabling direct detection of these interfering components, this experimental system was used to analyze the ability of several common extraction procedures to remove endogenous plasma components that cause changes in the ESI response of model drug substances. Methyl-t-butyl ether (MTBE) liquid-liquid, Oasis and Empore solid-phase, and acetonitrile (ACN) protein precipitation sample preparation methods were tested using the post-column infusion system. In all cases, ACN protein precipitation samples showed the greatest amount of ESI response suppression while liquid-liquid extracts demonstrated the least. In addition, the three test compounds, phenacetin, caffeine, and a representative Merck compound, demonstrated that ESI response suppression is compound dependent. Suppression was greatest with caffeine, the most polar analyte, and the smallest for the Merck compound, the least polar analyte. Copyright 1999 John Wiley & Sons, Ltd.     

Flow and breakup characteristics of elliptical liquid jets

This paper presents the results of an experimental study on liquid jets discharging from elliptical orifices into still ambient air. The experiments were conducted with a set of elliptical orifices of approximately same area of cross section but varying orifice aspect ratio using water and water–glycerol mixture as experimental fluids. The flow behavior of liquid jets was analyzed using their photographs captured by an imaging system. The measurements obtained for the elliptical liquid jets were compared with the circular liquid jets discharging from a circular orifice of the same area of cross section. Elliptical geometry of the orifice results in a flow process by which the emanating liquid jet periodically switches its major and minor axes as it flows downstream of the orifice. In this paper, we attempt to characterize the axis-switching process through its wavelength and amplitude. For a given elliptical orifice, the axis-switching process is dominantly seen in a particular range of flow conditions. The effects of the orifice aspect ratio and liquid viscosity on the axis-switching process are revealed through this study. The experimental results on jet breakup show that axis-switching process has a destabilizing effect on elliptical liquid jets within a particular range of flow conditions and it results in shorter breakup lengths compared to the circular jet. The extent to which axis-switching destabilizes the jet is dictated by the viscosity of liquid. An increase in orifice aspect ratio destabilizes elliptical liquid jets with low viscosity like water; however, this behavior seems to get obscured in water–glycerol mixture elliptical jets due to high viscosity.     

Morphology and Mechanical Properties of Thermoplastic Polyurethanes Containing Polyisobutylene/Poly(tetramethylene oxide) Mixed Segments

We investigated the thermal properties, microphase separated structure and mechanical properties of a series of thermoplastic polyurethanes (TPUs) containing both polyisobutylene (PIB) and poly(tetramethylene oxide) (PTMO) diols in the soft segment (SS). A series of TPUs were prepared with the same weight fraction of the SS but different ratio between PIB and PTMO diols. Molecular weight of the PTMO diol and chemical structure of the hard segment (HS) also varied. Dynamic mechanical analysis (DMA) measurements did not reveal strong microphase separation between PIB and PTMO in the SS. While it has been assumed that incorporating PTMO diol into the SS can enhance the phase mixing between the hard segment (HS) and SS, our results indicated that, in most cases, the degree of microphase separation of TPUs based on mixed diols is slightly higher than that of TPUs based on only PIB diol.     

Crystallization kinetics of Ti20Zr20Cu60 metallic glass by isoconversional methods using modulated differential scanning calorimetry

The study of crystallization kinetics of amorphous alloys has been a matter of great interest for material researchers for past few decades, since it provides information about the kinetic parameters i.e., activation energy of crystallization and the frequency factor. These kinetic parameters can be calculated by model-free isoconversional methods. Isoconversional methods allow calculating the activation energy as a function of degree of conversion, α. Hence, these methods provide accurate results for multistep processes like crystallization. Model-free methods are categorized as linear and non-linear isoconversional methods. Linear methods are further classified as linear differential and linear integral isoconversional methods. In present work, we have used these isoconversional methods to study the effect of non-linear heating rate, employed by modulated differential scanning calorimetry (MDSC), on the non-isothermal crystallization kinetics of Ti₂₀Zr₂₀Cu₆₀ metallic glass. For Ti₂₀Zr₂₀Cu₆₀, MDSC curves clearly indicate a two-step crystallization process. Both crystallization peaks were studied based on the modified expressions for isoconversional methods by non-linear heating rate. The term corresponding to non-linearity comes out to be (A _T ω/2β)². The effect of non-linear heating rate on measurement of kinetic parameters by isoconversional methods is studied. The activation energy of crystallization is calculated for Ti₂₀Zr₂₀Cu₆₀ metallic glass for various degrees of conversion by linear integral isoconversional methods i.e., Ozawa–Flynn–Wall, Kissinger–Akahira–Sunose, and also with Friedman method which is a linear differential isoconversional method.     

关于单位园周上阶梯函数的性质

Ｔ．Ｓｈｅｉｌ－Ｓｍａｌｌ［１］讨论了阶梯函数的Ｆｏｕｒｉｅｒ级数。本文对［１］中所涉及到一些阶梯函数的性质进行了详细讨论，并给出了详细证明。     

Chemotaxis driven instability of a confined bacterial suspension

A suspension of bacteria in a thin channel or film subject to a gradient in the concentration of a chemoattractant, will develop, in the absence of an imposed fluid flow, a steady bacteria concentration field that depends exponentially on cross-stream position. Above a critical bacteria concentration, this quiescent base state is unstable to a steady convective motion driven by the active stresses induced by the bacteria's swimming. Unlike previously identified long-wavelength instabilities of active fluids, this instability results from coupling of the bacteria concentration field with the disturbance flow.     

极限方程有奇性的一类六阶椭圆型方程混合边值问题解的渐近式

该文研究极限方程在部分边界上为退缩椭圆型(椭圆-抛物)的一类六阶椭圆型方程混合边值问题的奇摄动,在适当的假设下,应用改进了的多重尺度法,求得其解包括边界层和套层在内除了半圆域的两个角点外,在整个半圆域中有任意阶的一致有效的渐近展开式.     

Buoyancy effects on flow transition in low-density inertial gas jets

Effects of buoyancy on transition from laminar to turbulent flow are presented for a momentum-dominated helium jet injected into ambient air. The buoyancy was varied in a 2.2 s drop tower facility without affecting the remaining operating parameters. The jet flow in Earth gravity and microgravity was visualized using the rainbow schlieren deflectometry apparatus. Results show significant changes in the flow structure and transition behavior with change of buoyancy.     

增加光子奇偶q相干态的高阶压缩效应

通过数值计算研究了增加光子奇q相干态a_q^+m|α>_q^o和增加光子偶q相干态a_q^+m|α>_q^e的高阶压缩效应.结果表明:当q较小时,态a_q^+m|α>_q^o和a_q^+m|α>_q^e都能呈现出强烈的奇次方阶压缩效应,但无偶次方阶压缩效应,而且奇次方阶压缩随m的增大而增强.当m=0时a_q^+m|α>_q^o和a_q^+m|α>_q^e为光场振幅偶次幂的最小测不准态,但当m≠0时它们不是光场振幅偶次幂的最小测不准态.