Instrumental barriers in biological Fourier transform infrared spectroscopy

Biological applications of infrared spectroscopy have pressed for ever greater instrumental capabilities in terms of spectral sensitivity and quantitative exactness. Improved instrumentation has provided measurement of many vibrational modes in biological samples that previously were lost in noise. With highly optimized sampling conditions, useful measurements have been made with a peak-to-peak noise level less than 5 microabsorbance (5×10^–6 absorbance), at 0.5 cm^–1 resolution. However, optical and instrumental instabilities often result in sine waves that are not totally removed by the ratio of sample to reference. These often limit effective spectral sensitivity to 50 or 100 microabsorbance, peak-to-peak, and constitute a non-random noise. Non-atmospheric absorptions, especially one at 1959 cm^–1 with 0.8 cm^–1 band width (FWHM) are reported. The latter is due to a trace impurity in the KBr beam splitter substrate and compensator plate. Improvements in instrumentation and sampling conditions are expected to yield measurements of absorption bands as small as 50 microabsorbance with excellent signal/noise.     

Complexes of Oxygenated trans-Azoalkanes and Tetracyanoethylene. The Interaction of pi Oxygen Dipoles with an Electron Poor Alkene

The N-oxide and N,N'-dioxide (1ao and 1ado) of trans-1,1'-azonorbornane (1) associate with TCNE in solution and in the solid state. The solution complexes are characterized by charge-transfer optical absorptions at lambda(m) 364 and 540 nm in CH(2)Cl(2) for 1ao/TCNE and 1ado/TCNE, respectively. These complexes are weakly bound, with K(f) values of 0.5-3.0 M(-)(1). Crystals of (1ao)(2)/TCNE and 1ado/TCNE are isolable, and their structures have been determined by X-ray diffraction. Local donor-acceptor (DA) interactions between the pi dipolar donors and the electron poor TCNE are found. Crystals of (1ao)(2)/TCNE are composed of discrete D-A-D triads in which the 1ao oxygen approaches one of the olefinic C atoms (C(1), 2.86 ?) of TCNE more closely than the other (C(2), 3.07 ?). The O-C(1)-C(2) angle is 87 degrees, and the azooxide molecular plane lies perpendicular to the molecular plane of TCNE. 1ado/TCNE crystals are composed of extended -D-A-D-A- strands in which both oxygen poles of the azodioxide simultaneously interact with alternate TCNE acceptors. The D-A geometry here is structurally analogous to that in the (1ao)(2)/TCNE crystal. PM3 calculations of 1:1 and 1:2 trans HN(O)NH(O)/TCNE complexes constrained to have D-A (O-C) distances of 2.88 ?, but which are otherwise geometry optimized, reproduce the DA topology observed in the crystalline samples.     

A comparison of two approaches to the optimal positioning of a new product in an attribute space

This paper is concerned with the optimal positioning of a new product in an attribute space. A deterministic optimization model that relies on the axiom of choice is compared with the model byShocker/Srinivasan [1974] that incorporates a probabilistic measure of choice. Investigating the assumptions and the construction of both models, it is shown that the probability function byShocker/Srinivasan is based on a controversial assumption and incorporates a parameter that has not been given an economic explanation. Furthermore, both models are applied to complex configurations. It is demonstrated that the optimal positions for the new product resulting from the model byShocker/Srinivasan depend heavily on the parameter just mentioned and may run contrary to plausible consequences of the axiom of choice.

---

Zusammenfassung Für die optimale Gestaltung neuer Produkte, d.h. ihrer Positionierung in einem Raum von Produkteigenschaften, wird ein Modell angeboten, das auf einer deterministischen Kaufentscheidung beruht, ein anderes, das eine stochastische Kaufentscheidung unterstellt. Es wird gezeigt, daß der zuletzt genannte Modelltyp stark von der Spezifikation eines ökonomisch bisher nicht erklärten Parameters abhängt und z.T. Konsequenzen aufweist, die dem Wahlaxiom zuwider laufen, auf das das erstgenannte Modell aufbaut. Durch einen Vergleich auch komplexer Konfigurationen von Käuferbeurteilungen neuer Produkte wird gezeigt, welche Gestaltungsentscheidungen auf der Grundlage der beiden Modelle zur Optimierung einer Zielfunktion zu treffen sind.

     

Supramolecular assembly of lysine-b-glycine block copolypeptides at different solution conditions

Here we report the supramolecular assembly of poly(l-lysine)-b-polyglycine diblock copolypeptides at different solution conditions. Light scattering and confocal microscopy indicate that the supramolecular aggregates initially formed in solution are vesicles with a broad size distribution, depending strongly on the initial processing conditions. The vesicles formed after multiple pH cycles appear independent of the initial processing conditions and are related to the thermodynamic nature of the assembled supramolecular aggregates. Circular dichroism results verify that this change in size observed over pH cyclings tracks with the conformation changes of the lysine block confined in the vesicle membranes. This appears interesting for peptosome-based materials, implying a high level of fluidity in the membrane that allows the supramolecular aggregates formed in solution to respond to changes in pH. The results also show that the external stimulus, which is the change of pH in this study, provides an additional means to regulate polypeptide vesicle size and size distribution.     

Minimum Evaporation Model of Dermatological Delivery Systems. Lamellar Liquid Crystal Formulations Containing Brazilian Nut (Bertholletia excelsa HBK) Vegetable Oil and Guarana Glycolic Extract

Formulations with lyotropic liquid crystals were prepared from a Brazilian nut vegetable oil, guarana extract and combination of sorbitan monooleate (Span 80) and sorbitan monolaurate ethoxylate EO 20 (Tween 20) in the ratio 1:3 (surfactant component) and their physical–chemical aspects and rheological properties were determined. Compositions with liquid crystals were found in the pseudoternary diagram in a surfactant range of 70–90% and polarized light microscopy, small-angle x-ray scattering (SAXS) showed them to be lamellar. The preparations were furthermore characterized rheologically by shear stress shear rate sweeps finding plastic and pseudoplastic behavior without thixotropy. Electric conductivity and pH measurements demonstrated a potential for future application as dermatological delivery system of the active compounds in the Bertholletia excelsa and Paullinia cupana.      

Evolution of Actinyl Peroxide Clusters U28 in Dilute Electrolyte Solution: Exploring the Transition from Simple Ions to Macroionic Assemblies

Actinyl peroxide clusters, a unique class of uranyl‐containing nanoclusters discovered in recent years, are crucial intermediates between the (UO₂)²⁺ aqua‐ion monomer and bulk uranyl minerals. Herein, two actinyl polyoxometalate nanoclusters of Cs₁₅[(Ta(O₂)₄)Cs₄K₁₂(UO₂(O₂)_1.5)₂₈] ? 20 H₂O (CsK U₂₈ ) and Na₆K₉[(Ta(O₂)₄)Rb₄Na₁₂(UO₂(O₂)_1.5)₂₈] ? 20 H₂O (RbNa U₂₈ ) were synthesized by incorporating a central Ta(O₂)₄^3? anion that templates a hollow shell of 28 uranyl peroxide polyhedra. When dissolved in aqueous solutions with additional electrolytes, those 1.8 nm‐size macroanions self‐assembled into spherical, hollow, blackberry‐type supramolecular structures, as was characterized by laser‐light scattering (LLS) and TEM techniques. These clusters are the smallest macroions reported to date that form blackberry structures in solution, therefore, can be treated as valuable models for investigating the transition from simple ions to macroions. Kinetic studies showed an unusually long lag phase in the initial self‐assembly process, which is followed by a rapid formation of the blackberry structures in solution. The small cluster size and high surface‐charge density are essential in regulating the supramolecular structure formation, as was shown from the high activation energy barrier of 51.2±2 kJ mol^?1. Different countercations were introduced into the system to investigate the effect of ion binding to the length of the lag phase. The current research provides yet another scale of self‐assembly of uranyl peroxide complexes in aqueous media.     

Refractive and geometric lens characterization through multi-wavelength digital speckle pattern interferometry

Physical parameters of different types of lenses were measured through digital speckle pattern interferometry (DSPI) using a multimode diode laser as light source. When such lasers emit two or more longitudinal modes simultaneously the speckle image of an object appears covered of contour fringes. By performing the quantitative fringe evaluation the radii of curvature as well as the refractive indexes of the lenses were determined. The fringe quantitative evaluation was carried out through the four- and the eight-stepping techniques and the branch-cut method was employed for phase unwrapping. With all these parameters the focal length was calculated. This whole-field multi-wavelength method does enable the characterization of spherical and aspherical lenses and of positive and negative ones as well.