Covalent attachment of phospholipid analogous polymers to modify a polymeric membrane surface: a novel approach

A novel method for the surface modification of a microporous polypropylene membrane by tethering phospholipid analogous polymers (PAPs) is given, which includes the photoinduced graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA) and the ring-opening reaction of grafted poly-(DMAEMA) with 2-alkyloxy-2-oxo-1,3,2-dioxaphospholanes. Five 2-alkyloxy-2-oxo-1,3,2-dioxaphospholanes, containing octyloxy, dodecyloxy, tetradecyloxy, hexadecyloxy, and octadecyloxy groups in the molecular structure, were used to fabricate the PAP-modified polypropylene membranes. The attenuated total reflectance FT-IR spectra of the original, poly(DMAEMA)-grafted, and PAP-modified membranes confirmed the chemical changes on the membrane surface. Scanning electron microscope pictures showed that, compared with the original membrane, the surface porosities ofpoly(DMAEMA)-grafted and PAP-modified membranes were somewhat reduced. Water contact angles measured by the sessile drop method on PAP-modified membranes were slightly lower than that on the original polypropylene membrane, but higher than those on poly(DMAEMA)-grafted membranes with the exception of octyloxy-containing PAP-modified membranes. However, BSA adsorption experiments indicated that the five PAP-modified membranes had a much better protein-resistant property than the original polypropylene membrane and the poly(DMAEMA)-grafted membranes. For hexadecyloxy- and octadecyloxy-containing PAP-modified membranes, almost no protein adsorption was observed when the grafting degree was above 6 wt %. It was also found that the platelet adhesion was remarkably suppressed on the PAP-modified membranes. All these results demonstrate that the described approach is an effective way to improve the surface biocompatibility for polymeric membranes.     

Ruthenium-Catalyzed Direct Asymmetric Reductive Amination of Diaryl and Sterically Hindered Ketones with Ammonium Salts and H2

A Ru-catalyzed direct asymmetric reductive amination of ortho-OH-substituted diaryl and sterically hindered ketones with ammonium salts is reported. This method represents a straightforward route toward the synthesis of synthetically useful chiral primary diarylmethylamines and sterically hindered benzylamines (up to 97 % yield, 93–>99 % ee). Elaborations of the chiral amine products into bioactive compounds and a chiral ligand were demonstrated through manipulation of the removable and convertible -OH group.     

多糖凝胶的孔径和化学结构对单壁碳纳米管流动性和选择性分离的影响

基于凝胶柱色谱分离技术研究了单分散的单壁碳纳米管(SWCNTs)在不同化学结构多孔多糖凝胶中的流动特性以及对金属型(m-)/半导体型(s-)SWCNTs分离的影响.通过比较SWCNTs在一系列不同孔径的葡聚糖Sephacryl凝胶中的流动行为,发现减小孔径尺寸能够增强s-SWCNTs与凝胶之间的吸附作用力,使大直径的m-SWCNTs快速地流过凝胶颗粒,而选择性地保留了小直径的s-SWCNTs.进一步发现多糖凝胶化学结构比孔径尺寸在SWCNTs的m/s分离中起着更重要的作用.当基于葡聚糖结构的Sephacryl凝胶中的氨基结构被琼脂糖结构所取代时,如Superdex 200和Sepharose 2B凝胶会增强它们与SWCNTs之间的作用力,使SWCNTs的保留时间延长,降低了s-SWCNTs的选择性和纯度.此外,即使拥有与Sephacryl S100类似的孔径范围,当Sephacryl凝胶中的氨基被疏水环氧丙烷基团取代时,葡聚糖凝胶Sephadex G100与SWCNTs的作用力很弱,导致所有SWCNTs快速流动,无法实现SWCNTs的m/s分离.因而,我们认为凝胶孔径和化学结构共同影响并调控了SWCNTs的m/s分离的选择性、纯度以及分离效率.     

碳纳米管/聚苯胺/石墨烯复合纳米碳纸及其电化学电容行为

通过真空抽滤的方法制备碳纳米管纸,并对其进行循环伏安电化学氧化处理.以该电化学氧化处理的碳纳米管(CV-CNT)纸为基体,采用电化学聚合沉积聚苯胺(PANI),随后吸附石墨烯(GR),制备具有三明治夹心结构的碳纳米管/聚苯胺/石墨烯(CV-CNT/PANI/GR)复合纳米碳纸.该结构外层为GR,内层由PANI包裹的CNT形成网络骨架,充分发挥三者各自优势构建柔性电极材料.用场发射扫描电镜(FE-SEM)、透射电子显微镜(TEM)、拉曼光谱对其形貌与结构进行表征,并测试其电化学性能.研究发现:PANI呈纳米晶须状,并均匀包裹在CV-CNT表面;该复合碳纸具有良好的电容特性、大电流充放电特性以及良好的循环稳定性能.电流密度为0.5A·g-1时,比电容可达415F·g-1;20A·g-1时仍能保持106F·g-1的比电容.由于GR的保护作用,1000次循环之后较CV-CNT/PANI保持更高的有效比电容.该CV-CNT/PANI/GR复合碳纸展现出在高性能超级电容器柔性电极材料的潜在应用价值.     

掺Yb3+双包层大模场面积光纤锁模激光器

报道了一种结构简单、运转稳定并可以输出高脉冲能量的被动锁模光纤激光器.激光器的增益介质为掺Yb³⁺双包层大模场面积光纤,具有非常低的非线性系数.利用非线性偏振旋转效应和半导体可饱和吸收镜结合实现自启动锁模,获得了平均功率为160mW、重复频率为55.9MHz(对应于3nJ的单脉冲能量)、脉冲宽度为10.6ps的激光脉冲输出. 关键词： 大模场面积光纤 光纤激光器 锁模     

NaCl对琼脂糖凝胶电泳法分离单壁碳纳米管的影响

如何获得单一导电属性的单壁碳纳米管(SWCNT),使其在各领域得到更广泛的应用,引起了科研人员越来越多的关注.琼脂糖凝胶电泳(AGE)法以其简便,低成本,可规模化等优点在分离金属型(m-)和半导体型(s-)单壁碳纳米管的诸多分离方法中体现出独特的优势.本文利用紫外-可见-近红外(UV-Vis-NIR)吸收光谱分析手段,系统研究了NaCl的添加对AGE法分离SWCNT的影响.研究发现NaCl的添加对SWCNT的分离有一定的影响:当NaCl添加量低于70 mmol.L-1时,可以提高分离后体系中s-SWCNT的相对含量;当NaCl添加量高于70mmol.L-1时,随着添加量的增加,NaCl的加入开始抑制m-SWCNT和s-SWCNT的有效分离;当NaCl添加量达到160 mmol.L-1时体系分离效率明显降低.我们推测这种影响主要是由盐的添加改变了分散剂在m-SWCNT和s-SWCNT表面的吸附结构引起的.