A study of multimode fibre attenuation measurement using a precision spectral radiometer and the near-field filtration technique

Based on the near-field filtration formulation, the paper identifies and quantifies the most important sources of interlaboratory error in multimode fibre attenuation measurements. Measures are proposed for the reduction of these errors, and it is estimated that a lower bound of about 0.04 dB should be possible under certain assumptions.     

Heat transfer in bubble layers at elevated pressures

Heat transfer with steam condensation under moderate pressure on the surface of a horizontal tube immersed in a bubbling layer was experimentally investigated. A copper test section 16 mm in outer diameter and 400 mm in length was placed in a bubbling column 455 mm in diameter. Experiments were made under pressures of 0.14–0.8 MPa, with void fraction 0.04–0.23, vapor superficial velocities 0.05–0.42 m/s, liquid-wall temperature differences 47–105 K, and heat flux densities 0.12–0.8 MW/m². The heat transfer process in the bubbling layer is shown to be of a high intensity: with moderate values of steam content, heat transfer coefficients reach 12–14 kW/(m² · K). Data obtained showed that the known correlations do not consider the influence of pressure on heat transfer. For the first time, data on radial steam content distribution under pressures higher than atmospheric were obtained by an electroprobe method. A table of experimental data is presented.     

新开花粉蛋白的盐酸胍去折叠过程

本文利用荧光光谱和园二色光谱了新开花粉蛋白的盐酸胍去折叠过程。结果显示：新开花粉蛋白的盐酸胍去折叠是一个只包含天然蛋白和变性终态的二态过程,与已经报道的天花粉蛋白的盐酸胍去折叠的过程不同。     

Spatial distribution and decrease of dye solar cell performance induced by electrolyte filling

The spatial performance variation of dye solar cell with standard liquid electrolyte was examined by dividing the cell into segments. Surprisingly large and permanent performance differences were found in different parts of the cell leading to significant losses in the overall cell efficiency. The decrease of open circuit voltage along the electrolyte filling direction suggests that 4-tert-butylpyridine is adsorbed non-uniformly as the electrolyte passes through the dyed TiO₂ layer during the filling process. The result indicates that non-uniform electrolyte adsorption may limit the up-scaling of dye solar cells, which calls for the examination of electrolyte filling techniques and electrolyte compositions less prone to this effect.     

Review of nanofluids for heat transfer applications

Research on nanofluids has progressed rapidly since its enhanced thermal conductivity was first repotted about a decade ago,though much controversy and inconsistency have been reported,and insufficient understanding of the formulation and mechanism of nanofluids further limits their applications.This work presents a critical review of research on heat transfer applications of nanofluids with the aim of identifying the limiting factors so as to push forward their further development.     

CD40mAb adjuvant induces a rapid antibody response that may be beneficial in post-exposure prophylaxis

Active vaccination can be effective as a post-exposure prophylaxis, but the rapidity of the immune response induced, relative to the incubation time of the pathogen, is critical. We show here that CD40mAb conjugated to antigen induces a more rapid specific antibody response than currently used immunological adjuvants, alum and monophosphoryl lipid A™.     

Millimeter-Wave over Fiber Systems Using Hybrid OCDM/WDM Transmission

In this paper, we propose and simulate 2 OCDM × 4 WDM transmission system for a millimeter-wave (60 GHz) over fiber system to be used in broadband wireless access networks (BWANs). The general system setup is devised and the necessary building blocks identified. Results gathered (for a 155 Mbit/s per user system) under worst case parameter specifications and settings suggest indicate that system performance is severely limited by optical multiuser interference (OMUI) penalties. Several methods to reduce the OMUI limitations are described. These methods should ensure that this transmission scheme possible wavelength-reuse option for future MMW BWANs.