Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Choosing an adequate mathematical model in problems with high pulsed energy deposition

The problems of choosing the optimal mathematical model for a prescribed range of parameters of a pulsed action are discussed. A preliminary analysis performed by similarity and dimensional-analysis methods using interpolation equations of state of the matter shows that the complete system of equations of gasdynamics can be simplified by dropping individual terms which are not important in a given parameter range. The results of an analysis are presented in the form of nomograms, which also make it possible to identify the class of fast and energy-intensive gasdynamic processes more accurately than at an intuitive level. Zh. Tekh. Fiz. 68, 44–47 (May 1998)     

Dynamic compressibility,release adiabats,and the equation of state of stilbene at high energy densities

The shock adiabat of porous stilbene (1,2-diphenylethylene) up to the pressure P = 41 GPa and the dynamic compressibility of this material in reflected shock waves up to 77 GPa are studied experimentally. The run of the expansion isentropes of stilbene down to 0.1 GPa is determined. The experimental findings are used to construct a semi-empiric equation of state of stilbene for a wide range of high-energy states.     

Melting of Titanium by a Shock Wave Generated by an Intense Femtosecond Laser Pulse

JETP Letters - Laser shock peening with ultrashort laser pulses has been studied by hydrodynamic and atomistic simulations, as well as experimentally. It has been shown that, in contrast to...     

Acceleration of Metallic Flyers at Angara-5-1 Facility

The acceleration of a flyer by a magnetic field allows studying the dynamic characteristics of matter in submicrosecond processes. At the Angara-5-1 facility, pressure is created by a magnetic field of the current with the linear current density of up to 5 MA/cm. The velocity of up to 10 km/s was obtained in the first experiments on acceleration of a duralumin flyer 1 mm thick. Two methods are used for registration of the flyer velocity: laser shadow photography and VISAR interferometric method. This paper presents the results of experiments on determining the velocity of a flyer by the VISAR method. Particular attention is paid to the problem of suppression of spurious signals in the VISAR registration system. The first problem was electromagnetic interference emerging when the Angara-5-1 facility is activated, when megavolt voltages and megaampere currents are generated within a hundred nanoseconds. The second problem was bremstrahlung radiation emerging when magnetic self-isolation is established in vacuum transmission lines. This radiation affects the optics, fiber optic cables, and photomultipliers. The suppression of these two sources of interference ensured the reliable registration of the VISAR signals. The results obtained by the two laser methods—shadow photography and VISAR—coincide with each other and with the results of numerical simulation of flyer acceleration. The experimental results and simulation results are compared.

     

Synthetic magnetic opals

We present studies of novel nanocomposites of BiNi impregnated into the structure of opals as well as inverse opals. Atomic force microscopy and high resolution elemental analyses show a highly ordered structure and uniform distribution of the BiNi filler in the matrix. These BiNi-based nanocomposites are found to exhibit distinct ferromagnetic-like ordering with transition temperature of about 675 K. As far as we know there exists no report in literature on any BiNi compound which is magnetic.     

Magnetization curves for general cylindrical samples in a transverse field

Using the recent results for the surface current density on cylindrical surfaces of arbitrary cross-section producing uniform interior magnetic field we propose a method for obtaining solutions of Bean’s critical state model for general cylindrical samples. The method uses the technique of conformal mapping to express the sample surface and the flux-fronts in terms of a set of coefficients that depend on a parameter. The flux-fronts are to be determined by solving a system of nonlinear ordinary differential equations for the coefficients. Retaining only a certain finite number of leading coefficients we get an approximate solution. The procedure is illustrated by considering two cyclindrical samples — one with an elliptical cross-section and the other with a non-elliptical cross-section. The virgin curve and small and large magnetization hysteresis loops for the two samples are obtained.     

Low-field vortex dynamics in various high-T c thin films

We present a novel ac susceptibility technique for the study of vortex creep in superconducting thin films. With this technique we study the dynamics of dilute vortices in c-axis oriented Y-123, Hg-1212, and Tl-1212 thin films, as well as a axis oriented Hg-1212 thin films. Results on the Hg-1212 and Tl-1212 thin films indicate that dislocation-mediated plastic flux creep of single vortices dominates at low temperatures and fields. As the temperature (or the field) is increased, the increasing vortex-vortex interactions promote a collective behavior, which can be characterized by elastic creep with a non-zero μ exponent. Also, in some of these samples effects of thermally assisted quantum creep are visible up to 45 K in some of these samples. In Y-123 thin films, creep is found to be collective down to the lowest temperatures and fields investigated, while the quantum creep persists only up to 10–11 K.     

Shock compression of some porous media in conical targets: numerical study

Axially symmetric flows in conical solid targets filled by porous aluminum, graphite or polytetrafluoroethylene under impact of an aluminum plate with the velocity of 2.5 km/s are simulated numerically within the framework of the model of the hypoelastic ideal-plastic solid. The porosity of the samples is taken into account by conservation laws at the leading shock wave; the medium behind that is supposed to be nonporous. Equations of state for all materials in question are used to describe thermodynamic properties of the impactor and target over a wide range of pressures and temperatures taking into account phase transformations. The maximal over space and time pressure as a function of the initial relative density is presented and discussed.