Effect of acio properties of the alumina surface on the formation of chlorides during its interaction with CCl4

IR spectroscopy was employed to study acid properties of a series of alumina samples different in the phase composition and in the porous structure. The comparison of the surface acidity with the data on the quantitative formation of Cl^– during the interaction of CCl₄ with alumina indicates that the extent of chlorination of the samples tends to increase with increasing the surface acidity.

---

- , . Cl^– CCl₄ , .

     

Ti–Ni–Pd dense membranes—The effect of the gas mixtures on the hydrogen permeation

In this experimental work the influence of co-existing gases on the hydrogen permeation through a Ti–Ni–Pd membrane was studied. It was found that nitrogen, carbon dioxide and helium do not influence the hydrogen permeation through the dense membrane. However, carbon monoxide influences the hydrogen flux at each temperature investigated (400–500 °C). The results show that for low CO concentration (i.e. at H₂ upstream >80%), the hydrogen flux through the membrane decreases faster than linearly, while, at H₂ upstream <80%, the slope is linear but smaller than the theoretical one.     

Study of structural order in porphyrin-fullerene dyad ZnDHD6ee monolayers by electron diffraction and atomic force microscopy

The structure of porphyrin-fullerene dyad ZnDHD6ee monolayers formed on the surface of aqueous subphase in a Langmuir trough and transferred onto solid substrates has been studied. The data obtained are interpreted using simulation of the structure of isolated molecules and their packing in monolayer and modeling of diffraction patterns from molecular aggregates having different sizes and degrees of order. Experiments on the formation of condensed ZnDHD6ee monolayers are described. The structure of these monolayers on a water surface is analyzed using π-A isotherms. The structure of the monolayers transferred onto solid substrates is investigated by electron diffraction and atomic force microscopy. The unit-cell parameters of two-dimensional domains, which are characteristic of molecular packing in monolayers and deposited films, are determined. Domains are found to be organized into a texture (the molecular axes are oriented by the [001] direction perpendicular to the substrate). The monolayers contain a limited number of small 3D domains.     

Increase in the light collection from a scintillation strip with a hole for the WLS fiber using filling materials of various types

The light collection of extruded scintillation strip samples with the help of WLS fibers placed in a longitudinal hole inside of the plates has been measured. The holes are filled with various liquid fillers. Measurements are performed under irradiation by cosmic muons. A method for pumping a liquid filler with a viscosity of more than 10 Pa s into the strip hole with a WLS fiber inside is devised and successfully tested.     

Study of the Ancient Crimean Ceramics by Electron Microscopy Methods

Crystallography Reports - Fragments of ancient amphorae and tiles dated to the IVth to IInd centuries BC, which were found on the Crimean peninsula, have been investigated by methods of scanning...     

Erratum to: Electron Microscopy Studies of Manuscripts from Russian National Library

Crystallography Reports - An Erratum to this paper has been published: https://doi.org/10.1134/S1063774521340083     

Study of Bronze Statues “John the Baptist” and “Dancing Cupid” from the Collections of the Pushkin State Museum

Crystallography Reports - Bronze statues “John the Baptist” and “Dancing Cupid” from the collections of the Pushkin State Museum of Fine Arts have been investigated at the...     

Electron microscopy study of an Old Russian (XII century) encolpion cross with black inlay

The phase compositions of the basic material (alloy) of a pre-Mongolian Old Russian encolpion cross found near Suzdal and its black inlay have been investigated by methods of scanning and transmission electron microscopy and energy-dispersive X-ray microanalysis. The cross material is lead–zinc–tin α-bronze, and the black is copper sulfide with lead inclusions. As a result of the corrosion, tin and copper oxides and zinc sulfides, which made the cross dark gray, were formed on its surface. It is shown that the corrosion depth is as large as 50 μm; thus, laps must be prepared to accurately determine the morphology and phase composition of the corrosion layer. Decoration with black was apparently performed by pouring with copper sulfide melt or melting a powder preliminarily placed in grooves forming an image on the surface.     

X-Ray,Synchrotron and Mass-Spectrometric Methods for the Study of Ceramic Objects of Cultural Heritage

Crystallography Reports - Fragments of stamped amphorae (south Pontic (Sinope, III–I BC) and Mediterranean (Thasos, IV–III BC, and, presumably, Chios, III–II BC)), found in...