A gadolinium-based magnetic ionic liquid for supramolecular dispersive liquid–liquid microextraction followed by HPLC/UV for the determination of favipiravir in human plasma

Favipiravir is a potential antiviral medication that has been recently licensed for Covid-19 treatment. In this work, a gadolinium-based magnetic ionic liquid was prepared and used as an extractant in dispersive liquid–liquid microextraction (DLLME) of favipiravir in human plasma. The high enriching ability of DLLME allowed the determination of favipiravir in real samples using HPLC/UV with sufficient sensitivity. The effects of several variables on extraction efficiency were investigated, including type of extractant, amount of extractant, type of disperser and disperser volume. The maximum enrichment was attained using 50 mg of the Gd-magnetic ionic liquid (MIL) and 150 μl of tetrahydrofuran. The Gd-based MIL could form a supramolecular assembly in the presence of tetrahydrofuran, which enhanced the extraction efficiency of favipiravir. The developed method was validated according to US Food and Drug Administration bioanalytical method validation guidelines. The coefficient of determination was 0.9999, for a linear concentration range of 25 to 1.0 × 10⁵ ng/ml. The percentage recovery (accuracy) varied from 99.83 to 104.2%, with RSD values (precision) ranging from 4.07 to 11.84%. The total extraction time was about 12 min and the HPLC analysis time was 5 min. The method was simple, selective and sensitive for the determination of favipiravir in real human plasma.     

Colorimetric determination of macrolide antibiotics using ferric ion

Macrolide antibiotics such as erythromycin, oleandomycin, spiromycin, and tylosin are found to react with Fe(3+) in the presence of an acetic acid-sulfuric acid mixture to form a colored product having a useful absorption band at 592 nm. Troleandomycin forms only a weakly colored product upon reaction. The molar absorptivity is about 2900 1 mol(-1) cm(-1) for erythromycin and the detection limit is 5 mug ml(-1). This colorimetric method permits the analysis of fermentation broths containing either erythromycin or tylosin without a separation step.     

Bismuth compounds in organic synthesis. A one-pot synthesis of homoallyl ethers and homoallyl acetates from aldehydes catalyzed by bismuth triflate

[reaction: see text] Three one-pot methods for the conversion of aldehydes to homoallyl ethers catalyzed by Bi(OTf)(3).xH(2)O (1 < x < 4) have been developed. The one-pot synthesis of homoallyl ethers can be achieved either by in situ generation of the acetal followed by its reaction with allyltrialkylsilane or by a three-component synthesis in which the aldehyde, trimethylorthoformate or an alkoxytrimethylsilane and allyltrimethylsilane are mixed together in the presence of bismuth triflate (0.1-1.0 mol %). In addition, a three-component synthesis of homoallyl acetates, which is achieved by reacting the aldehyde, acetic anhydride, and allyltrimethylsilane in the presence of bismuth triflate (3.0-5.0 mol %), has been developed. The use of a relatively nontoxic, easy to handle, and inexpensive catalyst adds to the versatility of these methods.     

On-line photo-derivatization with flow injection and liquid chromatography-atmospheric pressure electrospray mass spectrometry for the identification of indoles

The application of on-line photochemistry with flow injection (FI) and liquid chromatography (LC) in conjunction with atmospheric pressure electrospray mass spectrometry (LC-APESI-MS) for the identification of similar indole derivatives is reported here. The photo-transformation of the indole compounds is strongly affected by the substituent groups on the aromatic and heterocyclic rings. Upon photolysis for 2.5 min, the mass spectrum of tryptamine (Try) which has no OH substituent on the aromatic ring does not differ greatly from that obtained without photolysis. However, after photolysis of serotonin (Ser) which has one OH group on C5 of the aromatic ring, the mass spectrum indicates the formation of dimers and higher molecular weight ions. The fragmentation pattern of 5-hydroxytryptophol (Phol) without photolysis resembles that of Ser with a base peak of m/z 160. Upon photolysis using MeOH-H₂O (10/90), Phol is found to form a base peak at m/z 375 (100%) and a major peak at m/z 214 (66%) in addition to other ions with lower abundance. Melatonin (Mel) and tryptophan (Phan) upon photolysis are found to form high molecular weight ions with a relative low abundance. The mass spectrum of indole-3-acetic acid (Inaa) with on-line photolysis also shows different ions that are not formed without photolysis.     

Photochemical reactivity of sulfamethoxazole and other sulfa compounds with photodiode array detection

The photochemical activities of six sulfa compounds [sulfacetamide (CET), sulfadiazine (DIA), sulfaguanidine (GUA), sulfamerazine (MER), sulfamethoxazole (SMX), and sulfamethizole (MET)] under different experimental conditions such as photolysis time, solvent and buffer pH are investigated by photodiode array (PDA) spectrophotometry. With no photolysis, the sulfa drugs CET and DIA show no absorbance at 332 nm and the other compounds only modest absorbance. Upon photolysis for 4 min, absorbance enhancements at 332 nm of three to four times for GUA and MET and 12-15 times for SMX and MER are observed. For CET and DIA after photolysis, the (absorbance) l/mg is now approximately 0.01-0.02 units. Although two pH optima of approximately 3-4 and 7 are noted, the optimum solvent for photolysis is ethanol without pH adjustment. For flow injection (FI) with on-line photolysis and PDA detection, a mobile phase of 100% ethanol with a step flow rate from 0.1 to 1 ml/min is used providing a 4-min reaction time. The FI detection limit for SMX with photolysis at 330 nm is 1 mg/l. The relative standard deviation data (n=4) of seven individual points in a calibration curve from 5 to 150 mg/l are 0-4%. The recovery of SMX from pharmaceutical tablets is 99.7% indicating no interference from trimethoprim which is not photochemically active.     

Determination of hydrazine and 1,1-dimethylhydrazine as salicyldehyde derivates by liquid chromatography with electrochemical detection

Summary Determination of hydrazine and 1,1-dimethylhydrazine after derivatization with salicylaldehyde was done using high-performance liquid chromatography with electrochemical detection. The oxidation of the phenolic group of salicylaldazine (S-HY) and salicylaldehyde-1,1-dimethylhydrazone (S-UDMH) was optimized with respect to ionic strength, pH, and applied potential. Less than 5 ng of S-HY and S-UDMH could be detected. The detection limits for hydrazine and 1,1-dimethylhydrazine solutions were estimated to be 0.025 and 0.20 ppm, respectively.     

Fluorimetric determination of danthron in pharmaceutical tablets and in urine

A simple, rapid determination is reported for danthron (1,8-dihydroxyanthraquinone) in pharmaceutical tablets. In a flow-injection system, danthron is reduced by sodium dithionite in $\text{1}\text{1}$ methanol/borate buffer to give a fluorescent complex. Linearity ranges from 30 μg ml^?1 to below 0.1 μg ml^?1. In urine samples, danthron is separated from other fluorescing species by reversed-phase high-performance liquid chromatography before its reduction by dithionite in a post-column reactor. Urine preparation requires no extraction. Spiked urine samples were studied in the working range of 0.02–2.0 μg ml^?1 danthron.     

Capillary electrophoresis of cardiolipin with on-line dye interaction and spectrophotometric detection

Cardiolipin is an important phospholipid present in the mitochondrial inner membrane. It plays a key function in mitochondrial respiration by interacting with many enzymes or cofactors related to oxidative phosphorylation complexes. We have determined the concentration of cardiolipin using on-line 10-N-nonyl acridine orange (NAO) dye interaction capillary electrophoresis (CE) and spectrophotometric detection with a sample throughput of 3 min. In addition to the presence of 0.1 mM NAO, the background electrolyte (BGE) composition has been set at 80% methanol-10% acetonitrile-10% H(2)O (all v/v) to provide both good solubility and the maximum absorbance enhancement at 497 nm for the NAO-cardiolipin complex as compared to NAO alone. Sample consumption for each injection is about 57 nL. A calibration curve is established from 0.5 microM to 0.1 mM with R (2) = 0.9912 with a detection limit of 0.05 microM for cardiolipin. In a blind study, actual mitochondrial cell membrane samples in the microL range before or after UV light exposure were analyzed using the CE method. Cardiolipin concentration decreased in the different parts of the membrane sample upon UV photolysis of the cells. Support for the theory that UV light can induce cardiolipin translocation from the inner membrane (IM) to the outer membrane (OM) was indicated by a significant percentage increase of cardiolipin (as measured by the cardiolipin in the OM as compared to the sum total in the OM and IM) from 30.7 +/- 2.4% before UV light photolysis to 38.3 +/- 2.2% after UV irradiation.     

Determination of lactate or oxalate using injected lactate oxidase and peroxidase by capillary electrophoresis with UV detection

Two reactions, catalyzed by lactate oxidase (LO) and peroxidase, are initiated by a single injection of the enzymes and the substrate 2,2'-azino-bis(3-ethylene-thiazoline-6-sulfonic acid) (ABTS) into the capillary previously filled with the sample (lactate or lactate-oxalate mixture) and the run buffer containing NADH. The oxidized ABTS product upon reaction with NADH is converted to NAD(+) which is separated and detected in less than 2 min at 266 nm with a sample throughput of 7 min (including wash steps between samples). Simplex trade mark software is used to optimize the enzyme concentrations and reaction temperature. Consumption of the more expensive LO enzyme is only 1.4 x 10(-3) U per assay assuming 27 nL per injection. Linearity is established within the range from 0.0025 to 1 mM with R(2) of 0.9982. Recoveries of lactate from five spiked serum samples averaged 101%. Application of this method for the determination of oxalate as an inhibitor of LO is demonstrated.