Binder-less and free-standing Co–Fe metal nanoparticles-decorated PVdF-HFP nanofiber membrane as an electrochemical probe for enzyme-less glucose sensors

Co–Fe bimetallic nanoparticles-affixed polyvinylidene fluoride-co-hexafluoropropylene (PVdF-HFP) nanofiber membrane is fabricated using the electrospinning and chemical reduction techniques. The semicrystalline polymeric backbone decorated with the highly crystalline Co–Fe bimetallic nanoparticles enunciates the mechanical integrity, while the incessant and swift electron mobility is articulated with the consistent dissemination of bimetallic nanoparticles on the intersected and multi-layered polymeric nanofibers. The diffusion and adsorption of glucose are expedited in the extended cavities and porosities of as-formulated polymeric nanofibers, maximizing the glucose utilization efficacy, while the uniformly implanted Co⁴⁺/Fe³⁺ active centers on PVdF-HFP nanofibers maximize the electrocatalytic activity toward glucose oxidation under alkaline regimes. Thus, the combinative sorts including nanofiber and nanocomposite strategies of PVdF-HFP/Co–Fe membrane assimilate the enzyme-less electrochemical glucose detection concerts of high sensitivity (375.01 μA mM^?1 cm^?2), low limit of detection (0.65 μm), and wide linear range (0.001 to 8 mM), outfitting the erstwhile enzyme-less glucose detection reports. Additionally, the endowments of high selectivity and real sample glucose-sensing analyses of PVdF-HFP/Co–Fe along with the binder-less and free-standing characteristics construct the state-of-the-art paradigm for the evolution of affordable enzyme-less electrochemical glucose sensors.

     

Electro chemical properties of porous PVdF-HFP membranes prepared with different nonsolvents

Porous poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) membranes were prepared by solvent–nonsolvent evaporation technique. Morphology and porosity of the membranes were varied with different nonsolvents and had an effect on electrochemical properties. The porous membranes were functionalized with different liquid electrolyte solutions such as p-toluene sulfonic acid/phosphoric acid/sulfuric acid. Maximum electrolyte uptake and minimal electrolyte leakage were tailored by the optimized porosity of the membranes. Thermal behavior obtained in this study ensures the complete evaporation of nonsolvents and ensures its thermal stability. The pTSA-activated PVdF-HFP/THF membrane exhibited high ionic conductivity of about 27.27 mS/cm and a lower methanol permeability in the range of 9.7 × 10⁻⁸ cm²/s. High compatibility between pTSA solution and porous PVdF-HFP polymer electrolyte membrane enhances its electro chemical behavior than that of conventional liquid electrolytes.     

Stretching and collapse of neutral polymer layers under association with ionic surfactants

We provide experimental evidence for stretching and collapse of neutral polymer layers, already adsorbed at an oil-in-water interface, due to its interaction with surfactants. Upon stretching, the first interaction length (2L(0)) follows a power law dependence on surfactant concentration ( proportional, variant C(x)(s), where x approximately 0.5 for cationic surfactants) and collapses in the presence of salt, as a relatively weak power law (C(-y)(s), where y=0.17), in good agreement with brush length decay for polyelectrolyte brushes.     

Towards Nanoscale Biomedical Devices in Medicine: Biofunctional and Spectroscopic Characterization of Superparamagnetic Nanoparticles

Medical interest in nanotechnology originates from a belief that nanoscale therapeutic devices can be constructed and directed towards its target inside the human body. Such nanodevices can be engineered by coupling superparamagnetic nanoparticle to biomedically active proteins. We hereby report the immobilization of a PhEst, a S-formylglutathione hydrolase from the psychrophilic P. haloplanktis TAC125 onto the gold coated surface of modified superparamagnetic core-shell nanoparticles (Fe₃O₄@Au). The synthesis of the nanoparticles is also reported. S-formylglutathione hydrolases constitute a family of ubiquitous enzymes which play a key role in formaldehyde detoxification both in prokaryotes and eukaryotes. PhEst was originally annotated as a putative feruloyl esterase, an enzyme that releases ferulic acid (an antioxidant reactive towards free radicals such as reactive oxygen species) from polysaccharides esters. Dynamic light scattering, scanning electron microscopy with energy dispersive X-ray spectroscopy, UV–visible absorption spectroscopy, fluorescence spectroscopy, magnetic separation technique and enzyme catalytic assay confirmed the chemical composition of the gold covered superparamagnetic nanoparticles, the binding and activity of the enzyme onto the nanoparticles. Activity data in U/ml confirmed that the immobilized enzyme is approximately 2 times more active than the free enzyme in solution. Such particles can be directed with external magnetic fields for bio-separation and focused towards a medical target for therapeutical as well as bio-sensor applications.     

Effect of Solvents and pH on <Emphasis Type="Italic">β</Emphasis>-Cyclodextrin Inclusion Complexation of 2,4-Dihydroxyazobenzene and 4-Hydroxyazobenzene

The spectral characteristics of 2,4-dihydroxyazobenzene (DHAB, sudan orange G) and 4-hydroxyazobenzene (HAB) have been studied in various solvents, different hydrogen ion and β-cyclodextrin (β-CD) concentrations, and are compared with azobenzene (AB). The inclusion complexes of the above molecules with β-CD were analyzed by UV-vis spectrometry, flourometry, FT-IR, ¹H NMR, SEM and DFT methods. The solvent study shows that only the azo form is present in DHAB and HAB molecules. The unusually large red shift observed in acidic solutions indicates both molecules exhibit azo-hydrazo tautomerization. In the β-CD solutions, the increase in fluorescence intensity and large bathochromic shift in the S₁ state indicates that DHAB and HAB form 2:2 inclusion complexes, whereas AB forms a 1:1 inclusion complex.     

Microbial electricity generation of diversified carbonaceous electrodes under variable mediators

To evaluate a suitable electrode material for the efficient green energy generation of a bio-fuel cell, carbonaceous based carbon cloth, carbon paper, and carbon felt electrodes were investigated under different mediators. The larger surface area, low resistance, and open network of interwoven fibers of the carbon felt electrode facilitated higher electron transfer from the microbial organisms to the electrode surface than that of other carbonaceous electrodes. Carbon paper electrode exhibited lower fuel cell performances due to its lower roughness and high tortuous nature. The green power generation experiments were also carried out under different mediators such as 2-hydroxy-l,4-naphthoquinone and thionin. The electrons mitigation and power generation was augmented by 2-hydroxy-l,4-naphthoquinone than thionin due to its high solubility, stability, and minimal adsorption characteristic to the electrodes. By the combined efforts of extended electrons generation and transportation, bio-fuel cell performances were extended and endorsed its doable applications in bio-fuel cells.     

Characterization of PVdF-HFP/Nafion/AlO[OH]n composite membranes for direct methanol fuel cell (DMFC)

Poly-(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP)/Nafion ionomer/aluminum oxy hydroxide nanocomposite membranes were prepared by phase inversion technique. The resultant membranes were subjected to protonic conductivity, methanol permeability, infra-red and thermogravimmetric analysis. The infra-red spectroscopic measurements revealed the presence of sulfonic acid groups in the composite membranes. The thermal stability and ionic conductivity of the polymer membranes have been greatly varied upon the addition of AlO[OH]_n. Although the PVDF-HFP/Nafion/AlO[OH]_n composite membranes have moderate protonic conductivity it has lower methanol permeability and may be considered as a candidate for DMFC applications.     

5 MeV Proton irradiation effects on 200 GHz silicon–germanium heterojunction bipolar transistors

The total dose effects of 5?MeV proton and Co-60 gamma irradiation in the dose range from 1 to 100?Mrad on advanced 200?GHz Silicon–Germanium heterojunction bipolar transistors (SiGe HBTs) are investigated. The SRIM simulation study was conducted to understand the energy loss of 5?MeV proton ions in SiGe HBT structure. Pre- and post-radiation DC figure of merits such as forward- and inverse-mode Gummel characteristics, excess base current, DC current gain and output characteristics were used to quantify the radiation tolerance of the devices. The results show that the proton creates a significant amount of damages in the surface and bulk of the transistor when compared with gamma irradiation. The SiGe HBTs shows robust ionizing radiation tolerance even up to a total dose of 100?Mrad for both radiations.     

3D Nanoporous FeAl-KIT-5 with a cage type pore structure: a highly efficient and stable catalyst for hydroarylation of styrene and arylacetylenes

A novel bimetallic nanoporous FeAl-KIT-5 catalyst with a cage type porous structure and a high surface area has been prepared for the hydroarylation of styrene and arylacetylenes to afford 1,1-diarylalkanes and 1,1-diarylalkenes, respectively. The catalyst was found to be highly active, and selective, affording a high yield of substituted alkanes and alkenes. The catalyst also showed much higher activity as compared to those of other nanoporous catalysts such as AlSBA-15, AlKIT-5, and FeKIT-5, and can be reused several times without much loss of its activity.