Measurement and prediction of speech and noise levels and the Lombard effect in eating establishments

Measurements made of the acoustical characteristics of, and occupied noise levels in, ten eating establishments are described. Levels to which diners and employees were exposed varied from 45 to 82 dB(A). From these levels and diner questionnaire responses, the number of customers present and average noise levels to which individual diners were exposed during their visits were estimated. These data, assumptions about the number of talkers per customer, and classical room-acoustical theory were used to deduce talker voice output levels. These varied from slightly above "casual" to "loud." An iterative model for predicting speech and noise levels in eating establishments, including the Lombard effect as described by a new, proposed model, was developed. With the measured noise levels as the target for prediction, optimization techniques were used to find best estimates of unknown prediction parameters--such as those defining the Lombard effect, the number of talkers per customer, and the average absorption per customer--with highly credible results. The prediction algorithm and optimal parameters constitute a novel model for predicting speech and noise levels--and thus speech intelligibility--in eating establishments, as a function of the number of customers, including a proven, realistic model of the Lombard effect.     

Efficient Synthesis of Bicyclo[3.3.1]nonane Systems via Tandem 1,3-Dinucleophilic Addition of 4-Hydroxy-2-quinolinones to Quinolinium Salts

The synthesis of bicyclo[3.3.1]nonane systems is reported. The synthesis is based on the tandem 1,3-dinucleophilic addition of 4-hydroxy-2-quinolinone to quinolinium salts.     

H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>-catalyzed one-pot synthesis of <Emphasis Type="Italic">bis</Emphasis>(indole) derivatives under silent and ultrasonic irradiation conditions in aqueous media

A convenient and direct approach has been developed for the preparation of bis(indole) derivatives by one-pot four-component condensing of indole, aldehydes and active methylene compounds in the presence of 12-tungstophosphoric acid in aqueous media under silent and ultrasound methods. The remarkable advantages are the simplicity of the experimental procedures, short reaction times and high yields with the green aspects by avoiding toxic catalysts and solvents.     

Synthesis and application of a novel solid-phase microextraction adsorbent: Hollow fiber supported carbon nanotube reinforced sol–gel for determination of phenobarbital

A novel solid-phase microextraction technique using a hollow fiber-supported sol–gel combined with multi-walled carbon nanotubes was employed in the determination of phenobarbital in wastewater. In this new technique, a silica-based, organic–inorganic polymer containing functionalized multi-walled carbon nanotubes (MWCNTs) was prepared with sol–gel technology via the reaction of tetraethylorthosilicate (TEOS) with an acidic catalyst (HCl). This sol was injected into a polypropylene hollow fiber segment for in situ gelation. This device operated in direct immersion sampling mode. The experimental setup is simple and affordable, and the device is disposable, so there is no risk of cross-contamination or carry-over. Parameters affecting extraction such as pH of the aqueous solution, ageing and extraction times, aqueous sample volume, agitation speed and carbon nanotube amount were optimized. Linearity was observed over a range of 0.50–5000 ng mL⁻¹, with an estimation coefficient (r²) higher than 0.982. The limit of detection (LOD) was 0.32 ng mL⁻¹ (n = 5), and repeatability (RSD% = 2.9) was from the average of three levels of analyte concentrations (1, 1000 and 4500 ng mL⁻¹) with three replicates for each within a single day. Finally, a pre-concentration factor of 2100 was obtained for phenobarbital.     

Green route for selective gram‐scale oxidation of sulfides using tungstate/triazine‐based ionic liquid immobilized on magnetic nanoparticles as a phase‐transfer heterogeneous catalyst

Tungstate ions were successfully loaded onto triazine‐based ionic liquid‐functionalized magnetic nanoparticles through an anion exchange process. The use of triazine core for creating ionic liquid led to the immobilization of high amounts of WO₄^2?. The resulting catalyst showed high activity and selectivity in the oxidation of sulfides to sulfoxides with H₂O₂ as a green oxidant at room temperature. In addition, due to the presence of ammonium groups in the catalyst structure, water dispersibility of the catalyst was increased. More important, the catalyst was magnetically recovered and reused for up to six runs without any marked decrease of activity and selectivity. Finally, easy gram‐scale oxidation of methylphenyl sulfide as well as fast separation of catalyst and product makes the protocol economical and industrially applicable.     

Structural,electrical and optical properties of Lin@C20 (n = 1–6) nanoclusters

The current research was undertaken to investigate the structural, electrical, and optical properties of C₂₀ fullerene decorated with different numbers of lithium (Li) atoms on its surface. The stability of the structure increased as the number of lithium atoms increased. Increasing the number of lithium atoms around C₂₀ from one to four slightly increased the E_g (energy gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital). Increasing the number to five or six narrowed the E_g. The electrical properties such as ionization potential (I), electron affinity (A), chemical potential (μ), global hardness (η), global softness (γ), global electrophilicity (ω), and electronegativity (χ) were also calculated. The polarizability (α) and first hyperpolarizability (β₀), which correspond to the linear optical and nonlinear optical properties, respectively, were also calculated. An intense increase in β₀ was recorded as the effect of five Li atoms adsorbed onto the C₂₀ surface. The results of this study can be used to design and fabricate nanomaterials with adjustable electro-optical properties.     

Enhancement of azo dyes removal efficiency by using LDH/Tris/Pd catalyst: Kinetic studies

LDH/Tris/Pd (CaAl‐layered double hydroxide/tris (hydroxymethyl)aminomethane/palladium) was synthesized and appraised for its catalytic activity towards the degradation of two selected azo dyes. The decolorization of azo dyes, acid red 18 (AR 18) and reactive yellow 15 (RY 15), requires considerably small amounts of synthesized catalyst. Kinetic studies show that the catalytic decolorization of these azo dyes follows the first order kinetic model. The reported method is simple and applicable; in addition, the stable catalyst can efficiently decolorize model azo dyes with good recyclability. Therefore, LDH/Tris/Pd can be accepted as the possible component for the utilization in wastewater treatment.     

Synthesis and characterization of P4VP/SBA-15 composite by in situ polymerization

Abstract  

Poly(4-vinylpyridine)/SBA-15 (P4VP/SBA-15) composites with various amounts of SBA-15 were prepared and characterized. The physical and chemical properties of P4VP/SBA-15 were investigated by XRD, BET, FT-IR, TGA, and SEM techniques. The catalytic performance of each material was determined for the Knoevenagel condensation reaction between carbonyl compounds and ethyl cyanoacetate in the presence of water as a solvent. The effects of reaction temperature, the amount of catalyst, amount of support, solvent, and the amount of benzoyl peroxide during the synthesis of P4VP/SBA-15 were investigated, as well as the recyclability of the heterogeneous composite. The catalyst used for this synthetically useful transformation showed a considerable level of reusability as well as very good activity. This reaction occurred rapidly when water was used as a solvent, so we assume it to be a green reaction.     

One‐Step Synthesis of Aromatic Terminal Alkynes from Their Corresponding Ketones under Microwave Irradiation

One‐step microwave‐assisted synthesis of phenylacetylenes 2a–j from the corresponding ketones 1a–j in the presence of a new reagent, PCl₅–pyridine, is described. The reaction is carried out under a simple operational and experimental procedure, avoiding the use of the complicated and harsh multistep reaction.