排序方式: 共有52条查询结果,搜索用时 31 毫秒
1.
根据栅控恒压电晕充电组合反极性电晕补偿充电法的实验结果计算出铁电驻极体的极化强度.结果说明,伴随着薄膜内孔洞气体的Paschen击穿,该铁电体的极化强度随栅压增加而显著上升.利用上述充电方法和热刺激放电(TSD)谱的分析讨论了这类空间电荷型宏观电偶极子,及与其补偿的空间电荷热退极化的电荷动态特性;阐明了这两类俘获电荷的能阱分布,即构成宏观电偶极子的位于孔洞上下介质层内的等值异号空间电荷分别被俘获在深、浅两种能值陷阱内,而位于薄膜表面层的注入空间电荷则被俘获在中等能值陷阱中.
关键词:
反极性电晕补偿充电法
铁电驻极体
充电电流
热刺激放电 相似文献
2.
Electrospun membranes are widely utilized to enhance the water vapor permeability and drug delivery performance of transdermal drug delivery patches. Due to the lack of adhesion property,however,most of them cannot closely contact with skin,which impedes the delivery of drugs to the skin,thus affecting the transdermal administration. C5 resin is used to endow poly(styrene isoprene styrene)(SIS)electrospun membranes with pressure-sensitive adhesion property. Investigation is performed on how to control the structure,adhesion properties and drug delivery performance of SIS/C5 electrospun membranes loaded with synthetic capsaicin via compositions,drugs and electrospinning conditions. The results demonstrate that the electrospun membrane with a SIS/C5 ratio of 2∶1 has excellent water vapor permeability(7. 17×10-3 g/(h·cm2)and adhesion properties(180(°)peel strength is 0. 2 kN/m,tack force is 0. 64 N/cm2 ,holding power is greater than 7 days). The synthetic capsaicin has good compatibility with the SIS/C5 electrospun membranes,in which no drug crystallizes and the drug loading is beneficial to improve the water vapor permeability. As the drug loading is 8%,the tack force is 0. 6~0. 8 N/cm2 ,the 180(°)peel strength is 0. 2~0. 3 kN/m,the holding power is greater than 7 days,and no residue is left during peeling tests. In vitro drug release indicates that the drug has a behavior of sustained release with a 24-hour cumulative release rate of greater than 50% for all SIS/ C5 electrospun membranes,meeting the requirements of transdermal drug delivery patches. © 2022, Science Press (China). All rights reserved. 相似文献
3.
利用表面带有周期性结构的硬质模板,通过冷压工艺将周期结构图案复制到多孔聚四氟乙烯(PTFE)薄膜表面,再经过热黏合工艺与致密氟化乙丙烯共聚物(FEP)薄膜复合,制备出了高度有序的微孔结构复合膜,并用电晕充电的方法对复合膜进行极化处理,最终获得氟聚合物复合膜压电驻极体.借助对这类复合膜压电驻极体介电谐振谱的测量,得到了材料的杨氏模量.并利用等温热老化工艺对它们的压电系数d33的热稳定性进行了考察.最后通过短路热刺激放电谱的测量和分析,讨论了该复合膜在热老化处理后的电荷动态
关键词:
有序结构
压电驻极体
压电性
电荷动态特性 相似文献
4.
利用常温下恒流和恒压电晕充电、充电后的等温表面电位衰减、热刺激放电和扫描电镜等实 验手段研究了恒流和恒压电晕充电技术对聚四氟乙烯多孔薄膜驻极体驻极态的影响.与恒压电晕充电相比较,恒流电晕充电时由于流过薄膜的电流恒定,增加了注入电荷在多孔结构厚度方向界面处的俘获概率,使沉积电荷密度上升,改善了驻极体的储电能力.然而,这些位于不同层深多孔界面处的俘获电荷在这类功能膜储存或使用过程中,经外激发从脱阱位置 以跳动(hopping)模式输运至背电极的路径相对缩短将导致脱阱电荷衰减较快.
关键词:
恒流电晕充电
聚四氟乙烯多孔膜
驻极体
电荷稳定性 相似文献
5.
6.
7.
基于开路热刺激放电电流和电荷等温衰减测量系统地研究了等温结晶化条件对氟化孔洞聚丙烯(PP)膜电荷稳定性的影响.结果表明等温结晶化温度和时间对氟化PP膜的电荷稳定性或电荷陷阱的构造具有显著的影响,即使90 ℃,0.5 h的等温结晶化处理也能显著地加深其电荷陷阱、改善电荷的稳定性.而且随着等温结晶化温度的提高和时间的延长,电荷陷阱进一步被加深、电荷稳定性进一步被改善,如130 ℃,2 h以上的等温结晶化情形.衰减全反射红外分析和宽角X射线衍射分析表明,电荷稳定性的改善归因于PP膜的组成和结构变化. 相似文献
8.
从山茱萸中提取出水溶性粗多糖, 经柱色谱分离纯化得到一种酸性多糖组分FCP5-A. 采用高效凝胶渗透色谱法(HPGPC)测定其为均一性多糖, 平均分子量为8.7×104. 经IR、GC、部分酸水解、13C NMR及甲基化分析等方法对该多糖的化学结构进行了表征. 结果表明, 该多糖由鼠李糖、阿拉伯糖、半乳糖及半乳糖醛酸组成, 其摩尔比为1∶5.7∶0.6∶1.2. FCP5-A为多分支结构, 由-2)Rha(1-及-4)GalA(1-构成主链, 在鼠李糖的4位存在分支; 支链主要由高度分支的阿拉伯糖构成, 此外还存在-3)Gal(1-; 末端残基为Ara(1-及Gal(1-. 结果提示, FCP5-A为一种新的山茱萸酸性分支多糖. 相似文献
9.
10.
Zhong-Fu Zhao Pei-Ying Liu Chun-Qing Zhang Wei Liu Yan-Hui Wang Tao Tang Yi-Fu Ding Yan-Dong Zhang Fan-Zhi Meng 《高分子科学》2018,(8)
Poly(ethylene oxide)(PEO) was controllably grafted from styrene-b-(ethylene-co-propylene)-b-styrene(SEPS) backbones by combining lithiation of styrenic units and living monomer-activated anionic ring-opening polymerization of ethylene oxide(EO)monomers with the aid of co-initiators triisobutyl aluminum.The as-synthesized SEPS-g-PEO copolymers were characterized by SEC,1 H-NMR,FTIR,SAXS,AFM and DSC.When the branch length is relatively small,increase of PEO fraction leads to the increase of the correlation length between neighboring hard domains,but the degree of correlation reduces.When the branch length is relatively large,the phase-separated structures become random both in terms of size and spatial correlation,and macro-phase separated structures appear.The crystallization behavior of the PEO branches can be effectively inhibited in SEPS-g-PEO,so no significant crystallization takes place until the fraction of PEO branches is 20.1 wt%,which greatly promotes the rapid delivery of hydrophilic drugs in the hot-melting pressuresensitive adhesives(HMPSAs) based on SEPS-g-PEO.Their cumulative release amount of a model drug could achieve 80%,more than twice the value in the HMPSAs based on linear PEO-containing styrenic block copolymers. 相似文献