Determination of thiol by high-performance liquid chromatography and fluorescence detection with 5-methyl-(2-(<Emphasis Type="Italic">m</Emphasis>-iodoacetylaminophenyl)benzoxazole

A new high-performance liquid chromatographic (HPLC) method for measuring low molecular weight (LMW) thiol-containing compounds, including cysteine (CysH), glutathione (GSH), N-acetylcysteine (Nac), penicillamine (PA), and 2-mercaptoethanol (2-ME), has been developed by using 5-methyl-(2-(m-iodoacetylaminophenyl)benzoxazole (MIPBO) as fluorescence-labeling reagent. The derivatization and separation conditions have been investigated in detail. Detection limits ranging from 3.5 to 15.0 fmol were achieved for the thiols investigated in a 16 min separation with detection wavelengths 310 and 375 nm for the excitation and emission, respectively. The utility of the proposed method has been validated by measuring CysH in human urine samples.     

Investigation on spontaneous ignition of two kinds of organic material with water

A systematic investigation was performed to elucidate the cause of spontaneous ignition of Refuse Derived Fuel (RDF) and Meat Bone Meal (MBM). Heat generation in both RDF and MBM with addition of water liquid and vapor at room temperature was determined by isothermal calorimetry. Compared with water liquid, the heat of wetting by sorption of water vapor at 80% relative humidity and 25 °C was larger, which can raise the temperature of RDF and MBM more than 30 and 56 °C, respectively. Heat generation due to fermentation occurred and the temperature of RDF and MBM reached or exceeded 80 °C after 5 days for RDF and 4 days for MBM at 100% RH. The spontaneous ignition for RDF and MBM results from heat of wetting and fermentation at room temperature and a further exothermic reaction at higher temperature.     

Spectrofluorimetric determination of cysteine by 5-maleimidyl-2-(m-methylphenyl)benzoxazole

A new thiol weak-fluorescence probe, 5-maleimidyl-2-(m-methylphenyl)benzoxazole (MMPB), gives a highly fluorescence product in the presence of Cys. In this paper, MMPB has been developed for the fluorimetric determination of cysteine (Cys). At lambda(ex)/lambda(em) = 305.6/425.6 nm, the linear range is from 0 to 3.3 x 10(-7) mol l(-1) and the detection limit (sigma = 3) of 6.2 x 10(-10) mol l(-1). The main advantage of this method lies in the relative high selectivity compared with the methods using other N-substituted maleimide type of thiol reagents, in which 0.15-fold (molar ratio) of GSH is allowed and most of other amino acids at 100-fold (molar ratio) level had no obvious effect on the results. The proposed method has been applied to the determination of Cys in real samples.     

多级质谱法测定Axinastatin 1环肽序列及其断裂机理研究

对具有抗癌活性的海洋环肽Axinastatin 1进行化学合成. 采用多级质谱法对合成环肽进行序列测定. 线性前体测序依据b_x－y_z断裂路径, 在同一张MS²谱中利用b和y离子所提供序列信息的互补来实现. 环肽测序依据b_x→b_x－1断裂路径, 每一级MS由b离子的C端碰撞掉一个氨基酸残基直到MS⁶, 得到2套b离子, 根据它们所提供序列信息的互补可准确测定环肽序列并推断其环结构, 同时观察到b离子重排现象. 讨论了上述断裂与重排的路径和机理, 并利用半经验量子化学PM3和AM1两种算法计算了碎片的生成焓, 验证了路径的合理性. 由离子b_5PN的生成焓偏高和其重排间的联系尝试提出过渡结构假设.     

扩散模型和凝聚模型耦合作用下胶体凝聚动力学的Monte Carlo模拟研究

以扩散模型(Ds(γ)=D0×sγ)和凝聚模型(Pij(σ)=P0×(i×j)σ)为基础,对胶体体系随时间的演变、团簇大小分布及其标度关系、团簇的重均大小S(t)的变化规律以及模型对最终分形维数的影响四个角度进行了比较研究,发现扩散指数γ0和凝聚概率指数σ0对胶体的凝聚动力学过程有相似的影响.本文在较宽的γ和σ取值范围内,对胶体的凝聚动力学进行了模拟研究,对慢速凝聚向快速凝聚的转化机理作了定量分析,并进一步分析了在团簇-团簇凝聚(CCA)模型下,得到类似扩散置限凝聚(DLA)模型的凝聚体的物理意义,结果表明:(1)γ0代表了体系中团簇或单粒做"定向运动"而非无规则的布朗运动的情况.这种"定向运动"的推动力可能来自于大团簇产生的强"长程范德华力"、"电场力"等,或来自于体系边界处的外力场的作用.(2)当σ0时,体系成为先快后慢的慢速凝聚,这可能对应大团簇为一排斥中心,即胶体颗粒存在"排斥力场"的现象.(3)证实了团簇的重均大小在凝聚过程的早期按指数规律增长,而后期按幂函数规律增长的实验现象.模拟研究还表明,胶体体系的凝聚动力学过程,在σ0时是一个存在正反馈机制的非线性动力学过程,而在σ0时则体现出负反馈的特征.     

在无机化学教学中渗透科学精神的探讨与实践

无机化学是大一新生学习高等化学知识的重要课程,在教学中渗透科学精神对学生科学素养的培养具有重要的意义。在对实验班的教学中进行了渗透科学精神的实践,以电池材料化学史为脉络,采用案例教学法,引导学生思考并推进学习进程,在这个过程中渗透科学精神中的开拓进取的探索精神。这一渗透科学精神的教学实践对学生的科学思维和科学行为产生了正面影响,激发了学生探索求实、积极进取的学习热情。     

辉光放电聚合物结构及力学性质研究

采用低压等离子体聚合技术,通过调整工作气压和反式二丁烯(T₂B)与H₂流量比制备了辉光放电聚合物(GDP)涂层. 利用傅里叶变换红外吸收光谱和元素分析法讨论了工作气压和T₂B与H₂流量比对GDP涂层内部H原子含量及结构的影响,并且通过纳米压痕技术对GDP涂层的硬度及杨氏模量进行了表征.研究结果表明:降低工作气压和T₂B与H₂流量比,GDP涂层内sp³ C 关键词： 傅里叶变换红外光谱 纳米压痕 杨氏模量 硬度     

[Cu(PTA)(Phen)2](p-MBA)(H6O)配合物的合成、晶体结构及电化学分析

The crystal structure of the title complex with the stoichiometric formula [Cu(PTA)(Phen)₂](p-MBA)(H₆O) (Phen=1,10-phenanthroline, PTA=terephthalic acid, p-MBA=p-toluic acid) has been determined by single-crystal X-ray diffraction. The crystal (C₄₈H₄₀CuN₄O₁₀, M_r=896.38) belongs to the monoclinic space group C2/c, with the following crystallographic parameters: a=1.778 6(3) nm, b=1.912 5(3) nm, c=1.389 9(2) nm, β=114.686(2)°, V=4.295 7(12) nm³, D_c=1.386 g·cm^-3, Z=4, μ(Mo Kα)=0.574 mm^-1, F(000)=1 860, final GooF=1.019, R=0.054 0, wR=0.148 3 for 2 644 observed reflections (I>2σ(I)). The crystal structure shows that the copper(Ⅱ) ion is coordinated with two oxygen atoms from one terephthalic acid molecule and four nitrogen atoms from two 1,10-phenanthroline molecules, forming a distorted octahedral coordination geometry. The cyclic voltametric behavior of the complex is also reported. CCDC: 298809.     

Silver(I) ion induced formation of 2-D ternary lead(II)-silver(I)-4-tolythiolate [PbAg2(μ-Stol)2(μ4-Stol)2]n from 1-D binary lead(II)-4-tolythiolate [(μ-Cl)Pb2(Stol)(μ-Stol)2]n (tol = 4-tolyl)

Treatment of [Pb(Stol)₂]_n with an equiv of [Et₄N]Cl in DMF afforded a new 1-D polymeric complex, [(μ-Cl)Pb₂(Stol)(μ-Stol)₂]_n (1), with Pb–Cl–Pb links. Interaction of 1 with a suspension of [Ag(Stol)] in DMF resulted in formation of a 2-D polymeric complex, [PbAg₂(μ-Stol)₂(μ₄-Stol)₂]_n (2), with the planar four-membered Ag₂S₂ and PbAgS₂ rings bridged by μ-Stol and μ₄-Stol ligands. Both polymeric complexes were structurally characterized by single-crystal X-ray diffraction analysis.     

硅氮化合物的结构与水解稳定性的关系

采用硅氮化合物本体与水蒸汽直接作用的方法,研究了一系列硅氮化合物的结构与水解稳定性之间的关系.结果表明,空间位阻越大则硅氮化合物水解稳定性越好,环张力对硅氮烷的水解稳定性有一定的影响,但空间位阻的作用更为显著.带有苯基的环二硅氮烷、六苯基环三硅氮烷和含硅氮键的高分子聚合物具有较大的空间位阻,因此水解稳定性非常好.