Flow-injection analysis with a small cylindrical wire type electrode

An amperometric detector with a small thin mercury film electrode is described. The device demonstrates advantageous operational characteristics such as small dispersion (D<2) and “memory effect” (me<0.6%), extensive maximum sample frequency (msf −200 samples/h), and high sensitivity. It has been proven useful in flow-injection analysis at a constant potential under hydrodynamic conditions.     

Modification of the 3He phase diagram by anisotropic disorder

Motivated by the recent prediction that uniaxially compressed aerogel can stabilize the anisotropic A phase over the isotropic B phase, we measure the pressure dependent superfluid fraction of (3)He entrained in 10% axially compressed, 98% porous aerogel. We observe that a broad region of the temperature-pressure phase diagram is occupied by the metastable A phase. The reappearance of the A phase on warming from the B phase, before superfluidity is extinguished at T(c), is in contrast to its absence in uncompressed aerogel. The phase diagram is modified from that of pure (3)He, with the disappearance of the polycritical point (PCP) and the appearance of a region of A phase extending below the PCP of bulk (3)He, even in zero applied magnetic field. The expected alignment of the A phase texture by compression is not observed.     

Real-time monitoring of nanomolar binding to a cyclodextrin monolayer immobilized on a Si/SiO2/novolac surface using white light reflectance spectroscopy: the case of triclosan

The monitoring of the antibacterial agent triclosan binding at nanomolar concentration from an aqueous solution by employing a well-packed monolayer with a predetermined single orientation made of specifically synthesized 2,3-dimethyl-6-(undec-10-enamide)-6-deoxy-β-cyclodextrin (DMBUA) on a silicon wafer (Si/SiO(2)) coated with a novolac resin is reported. A white light reflectance spectroscopy (WLRS) setup was used for the real-time monitoring of the DMBUA deposition and triclosan binding processes. Film thicknesses obtained by WLRS were in very good agreement with the ones measured by X-ray reflectivity (XRR) experiments. Triclosan binds strongly to the DMBUA monolayer (logK(assoc)=6.68). NMR studies in aqueous solution indicated that the chlorophenolyl ring rather than the dichlorophenyl ring is preferentially inserted into DMBUA cups. The current detecting system that requires no tedious surface chemistry, no thiolated cyclodextrins, no gold surfaces, and no expensive equipment may be useful in capturing small molecules and may permit various applications, e.g., preparation of antimicrobial surfaces.     

A retarded intramultipletM1 transition in214Bi

The half-life of the 53.2 keV level in²¹⁴Bi has been measured asT _1/2=0.52±0.15 ns, furtherT _1/2(295.2 keV and 351.9 keV levels)≦0.10 ns was estimated. TheB(M1,2^?→1^?) transition rates within theπh _9/2 vg _9/2 multiplet in^210,212,214Bi are found to decrease rapidly with increasing neutron number, reaching in²¹⁴Bi a value as low as those typical for intraband M1 transitions in deformed odd-odd nuclei.     

A Polynomial-Time Algorithm for Finding Regular Simple Paths in Outerplanar Graphs

Let G be a labeled directed graph with arc labels drawn from alphabet Σ, R be a regular expression over Σ, and x and y be a pair of nodes from G. The regular simple path (RSP) problem is to determine whether there is a simple path p in G from x to y, such that the concatenation of arc labels along p satisfies R. Although RSP is known to be NP-hard in general, we show that it is solvable in polynomial time when G is outerplanar. The proof proceeds by presenting an algorithm which gives a polynomial-time reduction of RSP for outerplanar graphs to RSP for directed acyclic graphs, a problem which has been shown to be solvable in polynomial time.     

Families of Liapunov-Krasovskiį functionals and stability for functional differential equations

This paper discusses the stability of solutions of nonautonomous functional differential equations with infinite delay with respect to a parr of admissible phase spaces of Hale and Kato. A one-parameter family of Liapunov-Krasovskiį functional, together with some additional analysis, is used to prove new sufficient conditions of asymptotic and uniform asymptotic stability for such equations. It is also shown that the so-called Razumikhin condition is unessential when families of Liapunov-Krasovskiį functionals are used. Entrata in Redazione il 25 settembre 1997. Invited address at the Second Marrakesh International Conference on Differential Equations, Marrakesh, Morocco, June 1995.     

Quantum dot-conjugated hybridization probes for preliminary screening of siRNA sequences

In the present study, we describe the design and fabrication of quantum dot-conjugated hybridization probes and their application to the development of a comparatively simple and rapid procedure for the selection of highly effective small-interfering RNA (siRNA) sequences for RNA interference (RNAi) in mammalian cells, for example, siRNAs with high accessibility and affinity to the respective mRNA target. A single-stranded siRNA was conjugated with a quantum dot and used as a hybridization probe. The target mRNA was amplified in the presence of Cy5-labeled nucleotides, and Cy5-mRNA served as a hybridization sample. The formation of siRNA/mRNA duplexes during a comparatively short hybridization time (1 h) was used as a criterion for the selection of highly effective, target-specific siRNA sequences. The accessibility and affinity of the siRNA sequence for the target mRNA site were determined by fluorescence resonance energy transfer (FRET) between a quantum dot (donor) and a fluorescent dye molecule (Cy5, acceptor) localized at an appropriate distance from each other when hybridization occurred. The FRET signal was observed only when there was high accessibility between an antisense siRNA and a sense mRNA and did not appear in the case of mismatch siRNAs. Moreover, the amplitude of the FRET signal significantly correlated with the specific effect of siRNA on the expression of the target mRNA and protein, determined in native cells by RT-PCR and immunoblot analysis, respectively.     

Proteomics approach in classifying the biochemical basis of the anticancer activity of the new olomoucine-derived synthetic cyclin-dependent kinase inhibitor, bohemine

The aim of this study was to use two-dimensional electrophoresis (2-DE) coupled with multivariate principal component analysis (PCA) to characterize the quantitative changes in the protein composition of the CEM T-lymphoblastic leukemia cell line after treatment with bohemine (BOH), a synthetic olomoucin-derived cyclin-dependent kinase inhibitor (CDKI). Cell classification, reflecting protein patterns, clearly distinguished two main groups: one group consists of 9, 12 and 24 h treated BOH cells while the second is represented by the 0 and 24 h control untreated cells and the 6 h BOH-exposed CEM lymphoblasts. Discriminant protein spots differentially expressed in the BOH-treated CEM cells were selected for identification by matrix assisted laser desorption/ionization-mass spectrometry (MALDI-MS) or electrospray ionization-tandem MS (ESI-MS/MS). Five of the selected protein spots were unequivocally identified as alpha-enolase, triosephosphate isomerase, eukaryotic initiation factor 5A, and alpha- and beta-subunits of Rho GDP-dissociation inhibitor 1. These proteins, all significantly downregulated in CEM T-lymphoblast leukemia in the course of BOH treatment, are known to play an important role in cellular functions such as glycolysis, protein biosynthesis, and cytoskeleton rearrangement. These results indicate that the cellular effects of olomoucine-derived CDKIs are not dependent on their ability to inhibit CDKs and could be mediated by several factors such as a decrease in protein synthesis and/or glycolysis which in turn diminishes the ability of cancer cells to function.     

Single quantum dot-micelles coated with silica shell as potentially non-cytotoxic fluorescent cell tracers

The present study describes a stabilization of single quantum dot (QD) micelles by hydrophobic silica precursors and an extension of the silica layer to form a silica shell around the micelle. The obtained product consists of up to 92% of single nanocrystals (CdSe, CdSe/ZnS, or CdSe/ZnSe/ZnS quantum dots) in the silica micelles, coated with silica shell. The thickness of silica shell could vary, starting from 3 to 4 nm. Increasing the shell thickness increases the photoluminescent characteristics of QDs in aqueous solution. The silica-shelled single CdSe/ZnS QD micelles possess a high quantum yield in aqueous solution, a controlled small size, sharp photoluminescence spectra (fwhm approximately 30 nm), an absence of aggregation, and a high transparency. The presence of a hydrophobic layer between the QD and silica shell ensures an incorporation of other hydrophobic molecules (with interesting properties) in the close proximity of nanocrystal. Thus, it is possible to combine the characteristics of hybrid material with the priority of small size. The nanoparticles are amino functionalized and ready for conjugation. A comparatively good biocompatibility is demonstrated. The nanoparticles show ability for intracellular delivery and are noncytotoxic during long-term incubation with viable cells in the absence of light exposure, which makes them appropriate for cell tracing and drug delivery.