硼离子对铕掺杂SiO2干凝胶发光性能的影响

采用溶胶-凝胶法制备了Al单掺和B，Al共掺的Eu掺杂SiO2干凝胶。利用荧光光谱、IR，XRD，DSC，TG／DTG等技术研究了硼离子、退火温度对样品发光性质的影响。经500℃以上退火处理用248nm激发的样品，产生Eu^3＋离子^5D0→^7FJ的特征发射，^5D0→^7F1的跃迁分裂为两个峰。比较615nm处的发光强度，掺硼酸样品的发光强度是不加硼酸发光强度的3．3倍。这是因为B离子的加入，在材料中形成了Si—O—B键，破坏了网络的对称性，加强了Eu^3＋的红光发射。当退火温度上升到850℃用350nm激发时，样品有很强的Eu^2＋蓝光发射。Al单掺的发射中心在437nm处，发射半峰宽约为70nm，而B，Al共掺样品的发光中心蓝移到425nm处，单掺样品的蓝光强度几乎是共掺样品强度的2倍。这是由于硼酸的加入改变了基质的网络结构，从而导致单掺和共掺样品发射峰位和强度的改变。     

Deposition pattern of drying droplets

The drying of liquid droplets is a common daily life phenomenon that has long held a special interest in scientific research. When the droplet includes nonvolatile solutes, the evaporation of the solvent induces rich deposition patterns of solutes on the substrate. Understanding the formation mechanism of these patterns has important ramifications for technical applications,ranging from coating to inkjet printing to disease detection. This topical review addresses the development of physical understanding of tailoring the specific ring-like deposition patterns of drying droplets. We start with a brief introduction of the experimental techniques that are developed to control these patterns of sessile droplets. We then summarize the development of the corresponding theory. Particular attention herein is focused on advances and issues related to applying the Onsager variational principle (OVP) theory to the study of the deposition patterns of drying droplets. The main obstacle to conventional theory is the requirement of complex numerical solutions, but fortunately there has been recent groundbreaking progress due to the OVP theory. The advantage of the OVP theory is that it can be used as an approximation tool to reduce the high-order conventional hydrodynamic equations to first-order evolution equations,facilitating the analysis of soft matter dynamic problems. As such, OVP theory is now well poised to become a theory of choice for predicting deposition patterns of drying droplets.     

Characterization of Ni/Al hybrid foam from atomic to microscale

In this paper, the Ni/Al hybrid open-cell foams are characterized on different hierarchical levels by means of experiments and numerical modeling from the atomic to the microscale. In this case, it is possible to compare the elastic-plastic behavior at different scales in order to attain a deeper understanding of the multiscale properties of the Ni/Al hybrid foams. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

A reconfigurable terahertz polarization converter based on metal–graphene hybrid metasurface

A metal-graphene hybrid metasurface polarization converter is designed in this Letter.The unit cell of the hybrid metasurface is composed of a butterfly-shaped structure whose branches are connected by multi-layer graphene sheets.The proposed device can be reconfigured from linear-to-circular polarization to cross-polarization by changing the Fermi energy of graphene.The simulation results show that for three-layer graphene,the device acts as a linear-to-circular polarization converter when EF=0 eV and switches to a cross-polarization converter when EF=0.5 eV.Compared with single-layer graphene,the device with three-layer graphene can maintain the cross-polarization conversion performance under low Fermi energy.Furthermore,two equivalent circuits in the x and y directions are developed to understand the working mechanism of the device.     

Micro-Gal laser absolute gravimeter based on high precision heterodyne interferometer

A micro-Gal absolute gravimeter based on high-precision and high-stability heterodyne interferometer is presented. The distance measuring technology of the gravimeter is studied in detail. The experimental results of distance measuring for a free-falling motion show that the high-precision heterodyne interferometer described in this paper can meet the demand of a micro-Gal absolute gravimeter with relative uncertainty of 6.4 × 10-9. Moreover, the heterodyne interferometer is more stable than the Mach-Zehnder interferometer (MZI) which is widely used in present absolute gravimeters.     

Multi-wavelength operation of LD side-pumped Nd:YAG laser

A dual-wavelength laser at 1064 nm and 1319 nm is obtained by a single Nd:YAG crystal rod. On the basis of 1064 nm and 1319 nm dual-wavelength laser installation, the second harmonic waves at 532 nm and 660 nm can be achieved by using non-linear frequency conversion technology. When 1064 nm and 1319 nm lasers oscillate simultaneously, the maximum output power is 30.5 W and 8.78 W, respectively. When the 1319 nm laser is restrained, we obtain a 35.6 W maximum output power at 1064 nm and by contrary 11.2 W at 1319 nm. The maximum output powers of 532 nm and 660 nm lasers are 5.34 W and 1.353 W when oscillating simultaneously. With one of them restrained, the maximum output power is 6.72 W at 532 nm and 1.90 W at 660 nm. The optimum repetition rate of the acousto-optic Q-switch is 10.5 KHz and 20.5 KHz for 532 nm and 660 nm lasers, respectively. The optical-to-optical conversion efficiency from the fundamental waves to the harmonic waves is 17.5% and 15.4%. The instability is less than 2%.     

Density functional study of TaSin (n = 1-3, 12) clusters adsorbed to graphene surface

A plane-wave density functional theory (DFT) calculations have been performed to investigate structural and electronic properties of TaSi_n (n = 1-3, 12) clusters supported by graphene surface. The resulting adsorption structures are described and discussed in terms of stability, bonding, and electron transfer between the cluster and the graphene. The TaSi_n clusters on graphene surface favor their free-standing ground-state structures. Especially in the cases of the linear TaSi₂ and the planar TaSi₃, the graphene surface may catalyze the transition of the TaSi_n clusters from an isomer of lower dimensionality into the ground-state structure. The adsorption site and configuration of TaSi_n on graphene surface are dominated by the interaction between Ta atom and graphene. Ta atom prefers to adsorb on the hollow site of graphene, and Si atoms tend to locate on the bridge site. Further, the electron transfer is found to proceed from the cluster to the surface for n = 1 and 2, while its direction reverses as n > 2. For the case of TaSi, chemisorption is shown to prevail over physisorption as the dominant mode of surface-adsorbate interaction by charge density analysis.     

Charge, orbital and spin ordering in multiferroic BiMn2O5: density functional theory calculations

Charge, orbital, and spin ordering of multiferroic BiMn(2)O(5) are investigated by the full-potential linearized augmented plane-wave (FPLAPW) method as implemented in the WIEN2K package. Both the generalized gradient approximation (GGA) as well as GGA plus the one-site Coulomb interaction (GGA+U) methods are considered for the exchange-correlation energy functional. The obtained results show that BiMn(2)O(5) is found stable in ferrimagnetic state with band gap about 1.23 eV. The results suggest that BiMn(2)O(5) contains two kinds of manganese: the ionicity of Mn1 (Mn(4+)) is +3.6 with magnetic moment of 2.40 μ(B) and the ionicity of Mn2 (Mn(3+)) is +3.4 with magnetic moment of 3.22 μ(B). While charge disproportion between Mn1 and Mn2 is small, the difference between e(g) minority occupancies of Mn(3+) and Mn(4+) cations is large. Both these two properties give direct evidence of charge ordering. The analysis of the Born effective charge reveals that the partial ferroelectric polarization (P(ele)) originates from the charge ordering, which is in agreement with a recent work by Brink and Khomskii [J. Phys.: Condens. Matter, 2008, 20, 434217].