A ONE-STEP SURFACE MODIFICATION PROCEDURE TO PEG-GRAFTED NANO-TITANIA

PEG （Polyethylene Glycol）-grafted nano-titania has been obtained in a one-step procedure using hexamethylene diisocyanate as the coupling agent and dibutyltin dilaurate as the catalyst in toluene at 80℃ and characterized qualitatively by FTIR and quantitatively by elemental analysis and thermogravimetric analysis. A comparison of nano-titania with two other commonly used inorganic nanoparticles, nano-silica and nano-alumina, is made, revealing that reactivity order is nano- silica 〉 nano-alumina 〉 nano-titania in view of PEG grafting. Possible mechanism of PEG grafting is also discussed.     

次甲基蓝-重铬酸钾体系测定草酸浓度的研究

草酸是人类饮食中最普遍存在的一种营养鳌合剂,主要存在于各种蔬菜中,过量食用会增加结石症发生的危险[1]。草酸也是引起各种经济作物茎腐病的病原因子[2],这种草酸毒素是由感染霉菌分泌的,但其致病机理并没有搞清楚[3]。因此,无论是临床上探索和治疗结石症,还是研究草酸毒素的     

暗怪波的相互作用

以耦合非线性薛定谔方程为理论模型,数值研究了两个一阶暗怪波在正常色散单模光纤中的相互作用.基于一阶暗怪波精确解,采用分步傅里叶数值模拟法,从间距、相位差和振幅系数比方面讨论相邻两个一阶暗怪波之间的相互作用.基于二阶暗怪波精确解,讨论了两个一阶暗怪波的非线性相互作用.研究结果表明:同相位情况下,间距参数T1为0、5、20时,相邻两个一阶暗怪波相互作用激发产生“扭结型”暗怪波.相比较于单个暗怪波发生能量的弥散,“扭结型”暗怪波分裂形成多个次暗怪波.反相位情况下,间距参数T1为2、7、12时,相邻两个一阶暗怪波相互作用也可以激发产生“扭结型”暗怪波.并且“扭结型”暗怪波初始激发的空间位置偏离原始单个暗怪波的位置5.振幅系数比越大,该空间位置越接近5.二阶暗怪波可以看作是两个一阶暗怪波的非线性叠加,复合型和三组分型二阶暗怪波与相邻两个一阶暗怪波的相互作用略有相似.     

2-氯化-n-氨基葡萄糖乙酰基三苯基季膦盐与DNA作用的荧光光谱研究及其应用

本文合成了2-氯化-n-氨基葡萄糖乙酰基三苯基季膦盐(2-GATPC)。利用荧光光谱法研究了2-GATPC与DNA的作用。实验结果表明,在pH3左右,DNA以静态猝灭的方式使2-GATPC的荧光强度显著降低。DNA的浓度在1.6×10-6~4.8×10-5mol.L-1的范围内,对2-GATPC的荧光有良好的线性猝灭关系,据此可以测定DNA,检出限可达8.4×10-7mol.L-1。方法简便快速,背景干扰小,对合成样品中DNA的测定,结果令人满意。     

DIBUTYLTIN DILAURATE-CATALYZED DIISOCYANATE COUPLING- GRAFTING OF POLY(ETHYLENE GLYCOL) ONTO NANO-SILICA SURFACE THROUGH A ONE-STEP PROCEDURE

Grafting polymer glycols onto nano-silica surface through one-step procedure was investigated. The major characteristic of this procedure is that all the materials and reagents (silica, PEG, TDI, DBTDL, solvent) required for grafting were added simultaneously into the reaction vessel. TDI and DBTDL were used as coupling agent and catalyst, respectively.The products were characterized by FTIR, TGA, elemental analyses and TEM, giving evidence for successful grafting of PEG. Possible mechanism of this grafting was studied and two grafting processes were proposed. The process through which the grafting proceeds depends on the reaction temperature. Effect of molecular weight of PEG on grafting was also investigated.     

L-Fuzzy保序算子空间的ω-分离性

在L-fuzzy保序算子空间中引进了ω-分离性等概念，系统地讨论了这些概念的性质。得出它们保持了L-fuzzy拓扑空间中的Ti分离性的主要结论，进而说明ω-分离性是R．Lowen的推广．     

Antibacterial thermoplastic polyurethane electrospun fiber mats prepared by 3-aminopropyltriethoxysilane-assisted adsorption of Ag nanoparticles

Antibacterial thermoplastic polyurethane(TPU) electrospun fiber mats were prepared by adsorption of Ag nanoparticles(Ag NPs) onto TPU/3-aminopropyltriethoxysilane(APS) co-electrospun fiber mats from silver sol. The use of APS can functionalize TPU fibers with amino groups, facilitating the adsorption of Ag NPs. The effects of p H of silver sol and APS content on Ag NP adsorption and antibacterial activity were investigated. Ag NP adsorption was evidenced by TEM, XPS and TGA. Significant Ag NP adsorption occurred at p H = 3-5. The main driving force for Ag NP adsorption is electrostatic interaction between ―NH3~+ of the fibers and ―COO-derived from the ―COOH group capped on the surfaces of Ag NPs. The antibacterial activity of the Ag NP-decorated TPU/APS fiber mats was investigated using both gram-negative Escherichia coli and gram-positive Bacillus subtilis. The antibacterial rate increases with increasing APS content up to 5% where the antibacterial rates against both types of bacteria are over 99.9%.     

MBA接枝聚丙烯微孔膜的亲水改性研究

运用表面吸附法使聚丙烯微孔膜表面覆盖上引发剂,然后浸入氮氮亚甲基双丙烯酰胺(MBA)水溶液在一定温度下进行接枝反应。研究了引发剂用量,单体浓度,反应时间与温度对接枝率的影响,并用红外、扫描电镜对聚丙烯膜接枝前后的微孔膜进行了表征。同时对膜的亲水性和水通量进行了测试,发现其亲水性能有了极大的提高,其中接枝改性后接触角与未接枝的相比降低了90°以上,吸水率最多提高了12%,但是水通量有所下降。还对改性微孔膜的抗污染性能进行了探究。     

灰色GM(1,1)模型研究综述

GM(1,1)是灰色预测理论的核心模型和基础模型.从累加生成方法、初值优化、背景值优化、参数估计方法、模型性质和模型拓展的视角,梳理了GM(1,1)模型的研究进展.明确了有待进一步研究的问题,对GM(1,1)模型的未来研究方向提出了建议.     

Effect of final heating temperature on crystallization of isotactic polypropylene nucleated with an aryl amide derivative as <Emphasis Type="Italic">β</Emphasis>-form nucleating agent

An aryl dicarboxylic acid amide compound TMB-5 is an efficientβ-form nucleating agent for isotactic polypropylene(iPP).Because of the solubility of TMB-5,superstructure and morphology of iPP crystals changed with melting conditions.Effects of final heating temperature(T_f)on heterogeneous nucleation of iPP/TMB-5 were investigated.It was discovered that the crystallization temperature increased with decreasing T_f value.The optical microscopic images indicated that when TMB-5 partially dissolved in iPP melt,the remaining(non-dissolved)TMB-5 facilitated the recrystallization of dissolved nucleating agent from the melt,which promoted crystallization.Complete solubility of nucleating agent caused the decreasing efficiency.TMB-5 recrystallized in the form of tiny needles,whose aggregates induced dendritic iPP crystals.