Reaction of poly(vinyl alcohol) with tetravalent ceric ion

Poly(vinyl alcohol) (PVAI) was oxidized by ceric ion, Ce(IV), in aqueous HNO₃ medium at different temperatures and found to be degraded as a result of selective cleavage of the 1,2-glycol unit existing in PVAl. The rate of oxidation increased with increasing temperature. The aldehyde groups formed at the ends of the degraded polymer upon oxidation were relatively stable at 0°C. With rise of temperature, the aldehyde groups reacted either with excess of Ce(IV) to carboxylic acids or with hydroxyl groups of PVAl molecules to give acetal linkage. When the acetalization predominated over the oxidation to carboxyl group, gelation of the reaction mixture was observed. Based on these results, a plausible mechanism of oxidation of PVAl with Ce(IV) and the subsequent reactions is discussed.     

The effect of ionising radiation on poly(methyl methacrylate) used in intraocular lenses

Gamma radiation is increasingly being used to sterilise intraocular lenses (IOLs) made from poly(methyl methacrylate) (PMMA). In this study, samples of PMMA used in the fabrication of IOLs were exposed to irradiation doses typically used for their sterilisation. The effect of this treatment on the polymer was analysed by size-exclusion chromatography (SEC), UV-visible and infrared spectroscopy and scanning electron microscopy (SEM). The PMMA was found to have undergone chain scission, decarboxylation and colour change following the irradiation.     

High-performance liquid chromatography of coenzyme Q-related compounds and its application to biological materials

A convenient and precise method for the separation and determination of coenzyme Q (CoQ)-related compounds (CoQ homologues, plastoquinone-9, ubichromenol-9, etc.) was developed using high-performance liquid chromatography (HPLC). All compounds tested were separated using a reverse-phase column with a suitable mobile phase and detected at a wavelength of 275 nm. CoQ extracts in plasma and erythrocytes were purified by thin-layer chromatography prior to HPLC analysis, but such purification was not necessary when determining CoQ in urine and tissues. Hydroquinone forms of CoQ existing in animal tissues were oxidized to the corresponding quinone forms with potassium hexacyanoferrate(III). This HPLC method was applied satisfactorily to the determination of the contents of CoQ homologues in human and animal samples. CoQ10 was the only homologue detected in human samples, and CoQ8, CoQ9 and CoQ10 were native homologues of CoQ in rat tissues. Ubichromenol-9 and plastoquinone-9 were not detected in these samples.     

New catalytic cycle for couplings of aldehydes with organochromium reagents

[reaction: see text] A new catalytic cycle has been developed to effect all three subgroups of Cr-mediated couplings, i.e., (1) Ni/Cr-mediated alkenylation, alkynylation, and arylation, (2) Co/Cr-mediated 2-haloallylation, alkylation, and propargylation, and (3) Cr-mediated allylation. In the presence of chiral sulfonamide ligands, good asymmetric inductions can be achieved for some of the Ni/Cr-mediated alkenylation, Co/Cr-mediated 2-haloallylation and propargylation, and Cr-mediated allylation.     

Determination of optimal formulation for extrusion granulation by compression test of wet kneaded mass

The purpose of this study is to propose the application of a compression test to the determination of an optimal formulation for extrusion granulation. The electric current during extrusion was measured and the characteristics of the wet kneaded mass in the compression test were analyzed under various operating conditions, with different types of extruders and several formulations of kneaded mass. It was found that addition of a binder (HPC-L) to pharmaceutical powders lowered the load of a high-compressing type extruder, since the binder reduced the friction among the wet mass during extrusion. Also, the support stress was found to be proportional to the compression pressure without a binder, although an inflection point appeared on the support stress curve when a binder was present. This inflection point suggested large water retention of the wet kneaded mass, at which the medium of pressure was changed from a discontinuous solid powder to a continuous liquid, and large water retention contributed to the low friction of the wet mass. The friction of the wet kneaded mass and the aptitude of the formulation for extrusion were understood by using the compression test. The compression test is a very useful procedure at the first stage of a formulation study.     

Surprisingly efficient catalytic Cr-mediated coupling reactions

[reaction: see text] With use of 1 mol % of Cr catalyst 5, surprisingly efficient Cr-mediated couplings of aldehydes with various types of nucleophiles have been realized. The catalyst set of Cr catalyst 5 and Ni catalyst 4 is used for alkenylation, alkynylation, and arylation, whereas the catalyst set of Cr catalyst 5 and CoPc (cobalt phthalocyanine) is used for 2-haloallylation, alkylation, and propargylation. Only the Cr catalyst 5 is required for allylation. The reaction rates in DME and THF have been found significantly faster than that in MeCN.     

The effect of humidity on thermal process of zinc acetate

The thermal decomposition of zinc acetate dihydrate Zn(CH₃CO₂)₂·2H₂O in some humidity-controlled atmospheres has been successfully investigated by novel thermal analyses, which are sample-controlled thermogravimetry (SCTG), thermogravimety combined with evolved gas analysis using mass spectrometry (TG–MS) and simultaneous measurement of differential scanning calorimetry and X-ray diffractometry (XRD–DSC). The thermal processes of anhydrous zinc acetate in dry gas atmosphere by conventional linear heating experiment initiated with the sublimation around 180 °C, followed by the fusion and the decomposition over 250 °C. SCTG was useful to interpret clearly the successive reaction because the high-temperature parallel decompositions were effectively inhibited. The thermal behavior changed dramatically by introducing water vapor in the atmosphere and the thermal process was quite different from that in dry gas atmosphere. Zinc oxide (ZnO) was formed only in a humidity-controlled atmosphere, and could be easily synthesized at temperatures below 300 °C. XRD–DSC equipped with a humidity generator revealed directly the crystalline change from Zn(CH₃CO₂)₂ to ZnO. A detailed thermal process of Zn(CH₃CO₂)₂·2H₂O and the effect of water vapor are discussed.     

Gas-phase generation of highly reactive hexatriyne-bridged [6n]paracyclophynes

[6n]Paracyclophenediynes 2a-d (n = 3-6) having [4.3.2]propellatriene units were prepared as precursors of the corresponding [6n]paracyclophynes. Laser irradiation of 2a-d produced the negative ions of [6n]paracyclophynes 1a-d (n = 3-6) by extrusion of the indan fragments, which were detected by time-of-flight mass spectrometry.