Electroanalytical properties of cytochrome c by direct electrochemistry on multi-walled carbon nanotubes incorporated with DNA biocomposite film

A novel conductive biocomposite film (MWCNTs–DNA–cyt c) which contains multi-walled carbon nanotubes (MWCNTs) along with the incorporation of DNA and cytochrome c (cyt c) has been synthesized on glassy carbon electrode (GCE), gold (Au), indium tin oxide (ITO) and screen printed carbon electrode (SPCE) by potentiostatic methods. The presence of both MWCNTs and DNA in the biocomposite film enhances the surface coverage concentration (Γ), increases the electron transfer rate constant (K_s) up to 21% and decreases the degradation of cyt c during the cycling. The biocomposite film also exhibits a promising enhanced electrocatalytic activity towards the reduction of halogen oxyanions and oxidation of biochemical compounds such as ascorbic acid and l-cysteine. The cyclic voltammetry has been used for the measurement of electroanalytical properties of analytes by means of biocomposite film modified GCEs. The sensitivity of MWCNTs–DNA–cyt c modified GCE possess higher values than the values obtained for DNA–cyt c film modified GCE. Further, the reduction potentials of halogen oxyanions E_pc, clearly shows that the activity of the biocomposite is dependent on the electronegativity of halogen oxyanions. Electrochemical quartz crystal microbalance studies revealed the enhancements in the functional properties of MWCNTs, DNA and cyt c. We have studied the surface morphology of the biocomposite films using scanning electron microscopy and atomic force microscopy, which revealed that DNA and cyt c have been incorporated on MWCNTs. Finally, the flow injection analysis has been used for the amperometric detection of analytes at MWCNTs–DNA–cyt c film modified SPCE.     

Visible Light Mediated Halogen Atom Transfer to Access Polyhalogenated and Deuterated Lactams from Alkyl Halides

A visible light mediated protocol for the synthesis of polyhalogenated and deuterated δ- and γ-lactams from readily available alkyl halides is reported. The reaction involves the generation of haloalkyl radicals through halogen atom transfer (XAT) and subsequent arylalkylation of olefins to afford dihydroisoquinolinones and oxindoles. This new XAT protocol exhibits wide scope under mild conditions and enables access to new halogenated chemical space.     

Intact cell matrix-assisted laser desorption/ionization mass spectrometry as a tool to screen drugs in vivo for regulation of protein expression

Here we demonstrate for the first time the application of intact cell matrix-assisted laser desorption/ionization mass spectrometry (ICM-MS) to study the regulation of protein expression. This technique can be extended to screen the drugs that inhibit protein synthesis in various diseases. We have used Escherichia coli cells expressing a recombinant glutathione-S-transferase (GST) gene under an arabinose-inducible promoter as a model system. Using ICM-MS analysis, we have detected a 28 kDa peak corresponding to the production of recombinant GST under the arabinose-induced condition. Furthermore, recombinant GST protein was purified by a single-step affinity purification using a glutathione Sepharose 4B affinity column from arabinose-induced E. coli cells. The purified GST protein was found to be a 28 kDa protein by MALDI analysis suggesting the arabinose-induced protein is indeed GST. The regulation of protein expression was studied using glucose as an alternative metabolite. The glucose-mediated regulation of the ara-operon was followed using the ICM-MS technique. All the results obtained from ICM-MS data were validated using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analysis. The present technique can be extended for in vivo screening of drugs and it holds tremendous potential to discover novel drugs against specific protein expressions in different diseases.     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.     

Poly(malachite green) at nafion doped multi-walled carbon nanotube composite film for simple aliphatic alcohols sensor

Conductive composite film which contains nafion (NF) doped multi-walled carbon nanotubes (MWCNTs) along with the incorporation of poly(malachite green) (PMG) has been synthesized on glassy carbon electrode (GCE), gold and indium tin oxide (ITO) electrodes by potentiostatic methods. The presence of MWCNTs in the composite film (MWCNTs-NF-PMG) enhances surface coverage concentration (Γ) of PMG to ≈396%, and increases the electron transfer rate constant (k_s) to ≈305%. Similarly, electrochemical quartz crystal microbalance study reveals the enhancement in the deposition of PMG at MWCNTs-NF film. The surface morphology of the composite film deposited on ITO electrode has been studied using scanning electron microscopy (SEM) and scanning tunneling microscopy (STM). These two techniques reveal that the PMG incorporated on MWCNTs-NF film. The MWCNTs-NF-PMG composite film also exhibits promising enhanced electrocatalytic activity towards the simple aliphatic alcohols such as methanol, ethanol and propanol. The electroanalytical responses of analytes at NF-PMG and MWCNTs-NF-PMG films were measured using both cyclic voltammetry (CV) and differential pulse voltammetry (DPV). From electroanalytical studies, well defined voltammetric peaks have been obtained at MWCNTs-NF-PMG composite film for methanol, ethanol and propanol at Epa = 609, 614 and 602 mV respectively. The sensitivity of MWCNTs-NF-PMG composite film towards methanol, ethanol and propanol in CV technique are 0.59, 0.36 and 0.92 μA mM⁻¹ cm⁻² respectively, which are higher than NF-PMG film. Further, the sensitivity values obtained using DPV are higher than the values obtained using CV technique.     

Studies on addition polymerization in mixed solvent system. Part I. Chain transfer of water in polymerization of methyl methacrylate

The role of water as a chain-transfer agent in addition polymerization of methyl methacrylate and acrylamide in a mixed solvent system was studied. Water does not have any transfer with the growing polymer radical. The degree of polymerization is found to increase with increasing water concentration. This is probably due to a reduced termination rate resulting from coiling of the polymer chain in the presence of a nonsolvent like water.     

Influence of graphene oxide incorporation and chemical cross‐linking on structure and mechanical properties of layer‐by‐layer assembled poly(Vinyl alcohol)‐Laponite free‐standing films

Functional fillers in multilayered films provide opportunity in tailoring the mechanical properties through chemical cross‐linking. In this study, Laponite‐graphene oxide co‐dispersion was used to incorporate graphene oxide (GO) easily into polyvinyl alcohol (PVA)/Laponite layer‐by‐layer (LBL) films. The LBL films were found to be uniform and the layer thickness increased linearly with number of depositions. The process was extended to a large number of depositions to investigate the macroscopic mechanical properties of the free‐standing films. The LBL films showed remarkable improvements in mechanical properties as compared to neat PVA film. The GO‐incorporated LBL films displayed higher enhancements in the tensile strength, ductility, and toughness as compared to that of PVA/Laponite LBL films, upon chemical cross‐linking. This suggests the advantageous effects of GO incorporation. Interestingly, cross‐linking of LBL films for longer time period (>1 h) and higher temperature (～80 °C) was not found to be much beneficial. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2377–2387     

Electroanalytical Responses of Arsenic Oxide,Methanol, and Oxygen at the Ruthenium Oxide–Hexachloroiridate with Platinum Hybrid Film

Electrochemically active ruthenium oxide (RuO_x?nH₂O), ruthenium oxide/hexachloroiridate (RuO_x?nH₂O/IrCl₆^2?), and ruthenium oxide/hexachloroiridate/platinum (RuO_x?nH₂O/IrCl₆^2?/Pt) hybrid films have been prepared from the mixture of Ru³⁺, IrCl₆^2?, and PtCl₆^2? ions in an acidic aqueous solution. The repetitive cyclic voltammetry (CV) has been used for the film preparation process. The electrochemical properties and the growth mechanism of the above mentioned different kinds of hybrid films have been investigated using CV and electrochemical quartz crystal microbalance. The morphological and quantitative analyses have been carried out using scanning electron microscopy, atomic force microscopy and energy dispersive X‐ray. Among these above mentioned films, RuO_x?nH₂O/IrCl₆^2?/Pt hybrid film exhibits promising electrocatalytic activity towards the oxidation of arsenic oxide, methanol and reduction of oxygen. Further, detailed study of electrocatalysis using rotating ring disk electrodes and amperometric methods have been carried out for arsenic oxide oxidation and oxygen reduction reactions at the hybrid films. From the results, the sensitivity of RuO_x?nH₂O/IrCl₆^2?/Pt hybrid film has been calculated for arsenic oxide as 0.7 mA mM^?1; and for oxygen as 1.8 mA mM^?1.     

Toluidine blue adsorbed on alcohol dehydrogenase modified glassy carbon electrode for voltammetric determination of ethanol

A novel toluidine blue O (TBO) adsorbed alcohol dehydrogenase (ADH) biocomposite film have been prepared through simple adsorption technique with the help of electrostatic interaction between oppositely charged layers. Nafion (NF) coating was made on top of the biocomposite film modified glassy carbon electrode (GCE) to protect ADH from leaching. The fabricated ADH/TBO/NF biocomposite electrode remains highly stable in the pH range from 4 to 13. More facile electron transfer process occurs at ADH/TBO/NF biocomposite than at TBO/NF film, which is obvious from the six folds increase in k_s value. Maximum surface coverage concentration (Γ) of TBO is noticed at ADH/TBO/NF film, which is 82% higher than at TBO/NF and 15% higher than at ADH/TBO film modified GCEs. Electrochemical impedance spectroscopy studies reveal that ADH has been well immobilized in the biocomposite film. Scanning electron microscopy studies confirm the discriminate surface morphology of various components present in the biocomposite film. Cyclic voltammetry studies validate that ADH/TBO/NF biocomposite film exhibits excellent electrocatalytic activity for ethanol oxidation at low over potential (I_pa = −0.14 V). The same studies show biocomposite film possesses a good sensitivity of 7.91 μA M⁻¹ cm⁻² for ethanol determination. This above sensitivity value is 17.40% higher than the sensitivity obtained for TBO/NF film (6.74 μA M⁻¹ cm⁻²). Further, using differential pulse voltammetry, a sensitivity of 1.70 μA M⁻¹ cm⁻² has been achieved for ADH/TBO/NF biocomposite film.     

Electroanalytical studies on green leaf volatiles for potential sensor development

An electrochemical study for detecting green leaf plant volatiles from healthy and infected plants has been devised and tested. The electrocatalytic response of plant volatiles at a gold electrode was measured using cyclic voltammetry, amperometric current-time (i-t) analysis, differential pulse voltammetry (DPV) and hydrodynamic experiments. The sensitivity of the gold electrode in i-t analysis was 0.13 mA mM(-1) cm(-2) for cis-3-hexenol, 0.11 mA mM(-1) cm(-2) for cis-hexenyl acetate and 0.02 mA mM(-1) cm(-2) for hexyl acetate. The limits of detection of cis-3-hexenol, cis-hexenyl acetate and hexyl acetate by i-t analysis were 0.5, 0.3 and 0.6 μM, respectively, at a signal to noise ratio of 3. The hydrodynamic studies yielded the electro-kinetic parameters such as diffusivities of plant volatiles in solution and the rate constants for their electrochemical reactions. The DPV and interference studies reveal that the gold electrode possessed high sensitivity for plant volatiles determination in synthetic samples, which imitates both healthy and infected plants.