Temperature Dependence of the Refractive Indices of Doped K2SO4 Crystals

Journal of Applied Spectroscopy - The temperature dependence of the refractive indices of K2SO4 with copper impurity was investigated. It was found that introduction of the copper impurity leads to...     

Ferritin immunosensing on microfabricated electrodes based on the integration of immunoprecipitation and electrochemical signaling reactions.

A signal registration strategy from micropatterned immunosensors that converts antigen-antibody binding reactions into electrochemical signals was demonstrated. An array-type micropatterned gold electrode on a silicon wafer was fabricated, containing two electrode geometries of rectangular (100 microm x 500 microm) and circular (r. 50 microm) types, exhibiting electrochemical characteristics of bulk and micro-electrodes, respectively. Ferritin was employed as a model analyte for immunosensing because it has an advantageous molecular structure for functionalization to the sensing interface, and is regarded as a general marker protein for tumors and cancer recurrence. With the fabricated and ferritin-functionalized immunosensors, biospecific interactions were performed with antiferritin antiserum and secondary antibody samples, followed by electrochemical signaling via an immunoprecipitation reaction by the label enzyme. Under the optimized affinity-surface construction steps and reaction conditions, both types of microfabricated electrodes exhibited well-defined calibration results as a function of the protein concentration in antiserum samples. Furthermore, circular-type micropatterned immunoelectrodes exhibited voltammetric characteristics of microelectrodes, which is advantageous in terms of sensor operation under a fixed potential and low signal drift during the signaling reaction compared with the bulk-type electrodes. The results support that the employed signaling method with the proposed immunosensor configuration is fit for sensor miniaturization and integration to future biomicrosystems.     

A system for measuring absolute frequencies of up to 4.25 THz using a Josephson point contact

A system for measuring the absolute frequency of a far-infrared (FIR) laser is described. Josephson point contacts have been utilized in the system as a frequency harmonic mixer connecting microwaves and optically pumped CH₃OH laser lines. The Josephson point contacts are capable of generating beat signals of 90 GHz microwaves and FIR waves of up to 4.25 THz. To measure the frequency of the beat signals from the Josephson junction with a frequency counter, tracking oscillators have been developed, which tracks the beat signals by phase locking and regenerate clean signals for frequency counting. It is shown that the absolute frequency can be measured to an accuracy of about 100 Hz by using the tracking oscillators.     

Analysis of atomic arrangement in magnetic Fe–Pt nanoparticles

The order parameter S of Fe–Pt nanoparticles is estimated from X-ray diffraction (XRD) patterns. The total intensity of a diffraction peak is obtained by Rietveld analysis as well as simply integrating the intensity. The Rietveld analysis is found to provide a plausible value of S even for a sample showing an XRD pattern with broad and overlapped peaks. Another order parameter Q, which is obtained from Mössbauer spectra, is introduced, and it is confirmed that Q is equivalent to the probability of Fe atoms being in the L1₀-type atomic arrangement. The coercivity of Fe–Pt nanoparticles is directly proportional to Q, while it vanishes at S=0.4, indicating that the magnetic property of Fe–Pt nanoparticles has a closer relationship to Q than S.     

Development of a Millimeter Wave Compact Equipment for NDT of Materials

We developed a compact equipment working at 94 GHz to replace the commonly used network analyzer for nondestructive testing of materials. The compact equipment was designed to measure the variations in the amplitude and phase of the reflected signal from the material relative to a reference signal. A good accuracy of the amplitude and phase measurement of the equipment was obtained in the confirmative experiments. The distribution of a drop of water in a wood plate is clearly visible in the millimeter wave images obtained by the amplitude and phase measurement.     

Sensitivity and stability analysis for nonlinear programming

We give a brief overview of important results in several areas of sensitivity and stability analysis for nonlinear programming, focusing initially on qualitative characterizations (e.g., continuity, differentiability and convexity) of the optimal value function. Subsequent results concern quantitative measures, in particular optimal value and solution point parameter derivative calculations, algorithmic approximations, and bounds. Our treatment is far from exhaustive and concentrates on results that hold for smooth well-structured problems.Research supported by National Science Foundation Grant ECS-86-19859 and Grant N00014-89-J-1537 Office of Naval Research.     

Solid-phase microextraction–capillary gas chromatography combined with microwave-induced plasma atomic-emission spectrometry for selenite determination

The use of solid-phase microextraction (SPME) with gas chromatography coupled to microwave-induced plasma atomic-emission detection (GC–MIP-AED) is described for selenite [Se(IV)] speciation. Aqueous standards were derivatised with sodium tetraethyl- or tetrapropylborate and extracted by SPME. Headspace extraction of the ethyl and propyl derivatives was studied. Relevant experimental conditions were optimised, including conditions for derivatisation and extraction and those of gas chromatographic analysis. The limits of detection achieved for headspace sampling of derivatised Se(IV) were in the low ng mL^–1 range for both ethylation and propylation. When the method was applied to analysis of selenite in selenised yeast reference material results were in good agreement with the indicated values.     

Method and apparatus for vacuum-thermic extraction (VTE) of toxic and essential elements from soils in oxidation-reduction medium in connection with analytical applications — I

A method is presented for simultaneous separation of traces of toxic and essential elements from soils. The method is based on programmed vacuum-thermic extraction of the elements in an oxidation-reduction medium. Under optimal conditions of temperature and pressure Pb, Zn, Cd, Bi, Tl, As, Sb, Te, Mo, Hg and Re are distilled or sublimated in elementary state or as oxides. A simple quartz apparatus is proposed. The elements extracted from matrix are dissolved in nitric acid and determined by AAS or OES with ICP excitation.     

Removal of the impurities from environmental water samples for tritium measurement by liquid scintillation counting

Liquid scintillation counting is the most popular method for tritium measurement, however, it takes much time and a lot of doing to distill off the impurities before mixing the sample water and liquid scintillation cocktail. We have investigated the possibility of an alternative method to the distillation. We have found out that the filtration can be an alternative to distillation for the environmental water samples before electrolytic enrichment.     

Tritium separation from heavy water by electrolysis with solid polymer electrolyte

A tritium separation from heavy water by electrolysis using a solid polymer electrode layer was specified. The cathode was made of stainless steel or nickel. The electrolysis was performed for 1 hour at 5, 10, 20, and 30 °C. Using a palladium catalyst, generated hydrogen and oxygen gases were recombined, which was collected with a cold trap. The activities of the samples were measured by a liquid scintillation counter. The apparent tritium separation factors of the heavy and light water at 20 °C were 2 and 12, respectively.