An algorithm to locate perinatal facilities in the municipality of Rio de Janeiro

In order to reduce infant mortality in the municipality of Rio de Janeiro it is desired to encourage all mothers-to-be to attend the appropriate health care facilities. A 3-level hierarchical prenatal–neonatal health care system is described together with a basic model for optimising accessibility to facilities. A genetic algorithm to solve the basic model is developed and some numerical experience reported. Extensions to the basic model and planned future research are briefly indicated.     

Fluorination of diamond — C4F9I and CF3I photochemistry on diamond (100)

The radiation-induced decomposition of C₄F₉I and CF₃I overlayers at 119 K on diamond (100) surfaces has been shown to be an efficient route to fluorination of the diamond surface. X-ray photoelectron spectroscopy has been used for photoactivation as well as for studying the photodecomposition of the fluoroalkyl iodide molecules, the attachment of the photofragments to the diamond surface, and the thermal decomposition of the fluoroalkyl ligands. Measured chemical shifts agree well with ab initio calculations of both C 1s and F 1s binding energies. It is found that chemisorbed CF₃ groups on diamond (100) decompose by 300 K whereas C₄F₉ groups decompose over the range 300 to 700 K and this reactivity difference is rationalized on steric grounds. Both of these thermal decomposition processes produce surface C---F bonds on the diamond. The surface C---F species thermally decompose over a wide temperature range extending up to 1500 K. Hydrogen passivation of the diamond surface is ineffective in preventing free radical attack from the photodissociated products of the fluoroalkyl iodides; I atoms produced photolytically abstract H from surface C---H bonds to yield hydrogen iodide at 119 K allowing diamond fluorination. The attachment of chemisorbed F species to the diamond (100) surface causes band bending as the surface states are occupied as a result of chemisorption. This results in a shift to higher binding energy of the diamond-related C 1s levels present in the surface and subsurface regions which are sampled by XPS on the diamond. The use of photoactivation of fluoroalkyl iodides for the fluorination of diamond surfaces provides a convenient route compared to other methods involving the action of atomic F, molecular F₂, XeF₂ and F-containing plasmas.     

The chemisorption of pentacene on Si(0 0 1)-2 × 1

Adsorption structures of the pentacene (C₂₂H₁₄) molecule on the clean Si(0 0 1)-2 × 1 surface were investigated by scanning tunneling microscopy (STM) in conjunction with density functional theory calculations and STM image simulations. The pentacene molecules were found to adsorb on four major sites and four minor sites. The adsorption structures of the pentacene molecules at the four major sites were determined by comparison between the experimental and the simulated STM images. Three out of the four theoretically identified adsorption structures are different from the previously proposed adsorption structures. They involve six to eight Si-C covalent chemical bonds. The adsorption energies of the major four structures are calculated to be in the range 67-128 kcal/mol. It was also found that the pentacene molecule hardly hopped on the surface when applying pulse bias voltages on the molecule, but was mostly decomposed.     

THE ENERGY ASPECT OF THE RECIPROCAL INTERACTIONS OF PAIRS OF TWO DIFFERENT VIBRATION MODES OF A CLAMPED ANNULAR PLATE

The standardized mutual active and reactive sound power of a clamped plate, representing the energy aspect of the reciprocal interactions of two different in vacuo modes, has been computed. It was assumed that the vibrations are axisymmetric, elastic and time harmonic, the plate's transverse deflection is small as compared with the plate's size, and that the vibration velocity is small as compared with the acoustic wavenumber generated. The Kirchhoff-Love theory of a perfectly elastic plate was used. The integral formulae for the mutual sound power were transformed into their Hankel representations which made possible their subsequent computation. A closed path integral was used to express the integral in its Hankel representation to compute the mutual active sound power. The asymptotic stationary phase method was used to compute the two magnitudes, i.e., the mutual active and reactive sound power. The results obtained are the asymptotic formulae valid for the acoustically fast waves. The oscillating as well as the non-oscillating terms have been identified in the formulae to make possible their further separate analysis. The availability of the asymptotic formulae makes possible some fast numerical computations of the mutual sound power. Moreover, the formulae presented herein, together with those for the individual modes known from the literature, make a complete basis for further computations of the total sound power of the plate's damped and forced vibrations in fluid.     

Encapsulation and sustained release of a model drug, indomethacin, using CO(2)-based microencapsulation

A carbon dioxide (CO(2))-based microencapsulation technique was used to impregnate indomethacin, a model drug, into biodegradable polymer nanoparticles. Compressed CO(2) was emulsified into aqueous suspensions of biodegradable particles. The CO(2) plasticizes the biodegradable polymers, increasing the drug diffusion rate in the particles so that drug loading is enhanced. Four types of biodegradable polymers were investigated, including poly(d,l-lactic acid) (PLA), poly(d,l-lactic acid-co-glycolic acid) (PLGA) with two different molar ratios of LA to GA, and a poly(d,l-lactic acid-b-ethylene glycol) (PLA-PEG) block copolymer. Biodegradable nanoparticles were prepared from polymer solutions through nonsolvent-induced precipitation in the presence of surfactants. Indomethacin was incorporated into biodegradable nanoparticles with no change of the particle size and morphology. The effects of a variety of experimental variables on the drug loadings were investigated. It was found that the drug loading was the highest for PLA homopolymer and decreased in PLGA copolymers as the fraction of glycolic acid increased. Indomethacin was predicted to have higher solubility in PLA than in PLGA based on the calculated solubility parameters. The drug loading in PLA increased markedly as the temperature for impregnation was increased from 35 to 45 degrees C. Drug release from the particles is a diffusion-controlled process, and sustained release can be maintained over 10 h. A simple Fickian diffusion model was used to estimate the diffusion coefficients of indomethacin in the biodegradable polymers. The diffusion coefficients are consistent with previous studies, suggesting that the polymer properties are unchanged by supercritical fluid processing. Supercritical CO(2) is nontoxic, easily separated from the polymers, can extract residual organic solvent, and can sterilize biodegradable polymers. The CO(2)-based microencapsulation technique is promising for the production of drug delivery devices without the use of harmful solvents.     

Mixing of electronic states in molybdenum complexes involved in nitrogen activation

The mechanism for nitrogen activation by molybdenum complexes is a complicated one, involving as it does the coupling of a quartet molybdenum reactant with a singlet nitrogen molecule, passing via a series of quartet and doublet encounter complexes to a triplet intermediate, with the subsequent spin crossing to the singlet surface which then leads via a singlet transition state to the final pair of singlet products. We have investigated in detail a variety of levels of theory to describe the crossing of these electronic surfaces and have calculated both lower-bound and actual minimum energy crossing points for the key spin inversion processes.     

Nondissociative chemisorption of short chain alkanethiols on Au(111)

The adsorption of methanethiol and n-propanethiol on the Au(111) surface has been studied by temperature-programmed desorption (TPD), Auger electron spectroscopy (AES), and low-temperature scanning tunneling microscopy (LT-STM). Methanethiol desorbs molecularly from the chemisorbed monolayer at temperatures below 220 K in three overlapping desorption processes. No evidence for S-H or C-S bond cleavage has been found on the basis of three types of observations: (1) A mixture of chemisorbed CH3SD and CD3SH does not yield CD3SD, (2) no sulfur remains after desorption, and (3) no residual surface species remain when the adsorbed layer is heated to 300 K as measured by STM. On the other hand, when defects are introduced on the surface by ion bombardment, the desorption temperature of CH3SH is extended to 300 K and a small amount of dimethyl disulfide is observed to desorb at 410 K, indicating that S-H bond scission occurs on defect sites on Au(111) followed by dimerization of CH3S(a) species. Propanethiol also adsorbs nondissociatively on the Au(111) surface and desorbs from the surface below 250 K.     

Bicyclopentanoid sesquiterpenes. the synthesis of cedranoid sesquiterpenes via the photo-rearrangement of bicyclo[2.2.2]octenones

(±) - exo - 2,6,6 - Trimethyltricyclo[5.3.1.0^1,5]undecane - 8,10 - dione (11) has been synthesized from dimethyl 6,6 - dimethyl - 5 - oxobicyclo[2.2.2]oct - 7 - ene dicarboxylate (17). This constitutes a new synthesis of cedrol (3) since 11 has previously been converted to this compound.     

Acidity functions of aqueous fluorinated acid solutions by differential pulse polarography

The acidity functions of aqueous trifluoroacetic and trifluoromethanesulphonic acid mixtures, and aqueous hexafluoropropane-2, 2-diol solutions, have been determined by differential pulse polarography. The apparent shift of the half-wave potential for the ferrocene—ferricinium couple, as the solvent composition is changed, is used to indicate the change in potential of a glass electrode; acidity is measured as the H_GF acidity function. The densities of two of these solvent systems as a function of composition are also reported. Trifluoromethanesulphonic acid—water mixtures represent the strongest aqueous acid solvent system so far studied.     

Carbon dioxide emulsion assisted loading of polymer microspheres toward sustained release materials

An organic solvent-free method for encapsulating progesterone at high loadings within micron-sized inert latex polymer beads is reported. This approach makes use of a polymeric surfactant to emulsify carbon dioxide into an aqueous latex suspension. In this way, preformed approximately 4 microm polystyrene (PS) microparticles surface-grafted with poly(N-vinylpyrrolidone) (PVP) were plasticized and swollen followed by rapid partitioning of progesterone into the polymer matrix. The as-prepared polystyrene beads incorporated over 10% progesterone by weight while maintaining their initial size and morphological uniformity. Dissolution experiments were also carried out to obtain the release profile of progesterone entrapped within the PVP/PS particles.