Superquantiles at Work: Machine Learning Applications and Efficient Subgradient Computation

Set-Valued and Variational Analysis - R. Tyrell Rockafellar and his collaborators introduced, in a series of works, new regression modeling methods based on the notion of superquantile (or...     

Analysis of plane and axisymmetric flows of incompressible fluids with the stream tube method: Numerical simulation by trust-region optimization algorithm

New concepts for the study of incompressible plane or axisymmetric flows are analysed by the stream tube method. Flows without eddies and pure vortex flows are considered in a transformed domain where the mapped streamlines are rectilinear or circular. The transformation between the physical domain and the computational domain is an unknown of the problem. In order to solve the non-linear set of relevant equations, we present a new algorithm based on a trust region technique which is effective for non-convex optimization problems. Experimental results show that the new algorithm is more robust compared to the Newton-Raphson method.     

Kelvin states in an inhomogeneous elastic space

Summary An explicit solution to Kelvin's problem in linear elastostatics is given when the indefinite elastic medium in isotropie, but not homogeneous. As a constitutive law, it is assumed that the tangent modulus is a constant, while varies with the distance from the origin according to an exponential law.

---

Sommario Viene data una soluzione formale del problema di Kelvin in elastostatica quando il mezzo elastico indefinito è isotropo, ma non omogeneo. Come legge costitutiva, si assume costante il modulo tangenziale , mentre varia con la dlstanza dall'origine secondo una legge esponenziale.

---

---

On leave at Istituto di Scienza delle Costruzioni. Pisa (Italy).     

CH bond activation in the presence or absence of oxygen or nitrous oxide

The reaction of C₂H₆with lattice oxygen, O^2- (in the absence of gaseous oxygen), or “adsorbedℍ oxygen (in the presence of gaseous oxygen) over NiMoO₄ catalysts has been performed and compared to C₃H₈ activation. The results obtained indicate that adsorbed oxygen exhibits a higher reactivity to C₂H₆, while lattice oxygen is more reactive relative to C₃H₈. Kinetic studies of these two reactions in presence of molecular oxygen have indeed shown that the ethane oxidative dehydrogenation (ODH) is dependent on the oxygen partial pressure, whilst on the contrary propane ODH is not. In order to confirm the presence of “adsorbed” oxygen for ethane activation, ODH tests have been performed with N₂O. On increasing temperature, the O^- adsorbed species enhances the mild oxidation of ethane. The activation energy of ethane consumption E_C2H6, relative to propane (E_C3H8 = 133 kJ/mol) is 145 kJ/mol. A possible mechanism is proposed for the oxidative dehydrogenation of ethane. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanical and physico-chemical characterization of cyclodextrin finished polyamide fibers

We present the study of the cyclodextrin (CDs) finishing of polyamide fibers (PA) by means of citric acid (CTR) as crosslinking agent. We observed that the mode of grafting happened by the formation of a crosslinked polymer formed between CTR and CDs. This polymer physically adhered to the fibers network and was resistant to hot water washings. Modified fibers were characterized by evaluating the contact angle with a polar liquid and by studying the hysteresis of damping of PA fibers (Cahn balance) with various grafting rates and by studying the absorptivity of grafted fabrics via the technique of the posed drop (Digidrop^® instrument). Then a mechanical characterization of the PA fabrics grafted with various proportions of CDs was accomplished, by traction and tear tests by using a tensile-test bench Lohmergy. Finally a topographic study of PA grafted surfaces was approached by atomic force microscopy (AFM and LFM; contact and non-contact mode) which permitted to evaluate the roughness and the chemical heterogeneity of the grafted surfaces.     

Synthesis of Nickel Supported Catalysts for Hydrogen Production by Sol-Gel Method

SiO₂ and Al₂O₃ supported Ni catalysts were synthesized in the form of xerogels: the SiO₂ based materials were prepared starting from Ni propionate or glycolate salts and reacting them with tetraethoxysilane (TEOS) in propionic acid, Si(ethylene glycolate) or sodium silicate. The Al₂O₃ supported catalysts were prepared similarly from Ni propionate salts with Al iso-propoxide salts. Narrow metal particles and strong metal support interactions are observed in the sol-gel catalysts. The metal dispersion was higher for Al₂O₃ based materials than the SiO₂ ones and it deeply depends on the Ni precursor for the silica supported Ni. Wet impregnated oxides with similar Ni loading have higher metal surface area than those from sol-gel processing. The influence of surface differences on the catalytic activity of the materials was studied following the CH₄ and CO₂ reaction in dry reforming conditions by pulse reaction tests.     

Conventional hydrothermal process versus microwave-assisted hydrothermal synthesis of La1−xAgxMnO3+δ (x = 0, 0.2) perovskites used in methane combustion

A study on the synthesis of La_1−xAg_xMnO_3+δ (x = 0, 0.2) using a microwave process (MWhyd) has been carried out by comparing the heating time and reaction temperature with the same factor under conventional thermal process (CHhyd). Experiments have been conducted using the hydrothermal method at medium pressure (T = 200 °C, P = 20 atm) followed by a thermal treatment of the precursor at 700 °C (10 h).Structural and physico-chemical properties of the catalysts were investigated using X-ray diffraction (XRD), BET sorption, temperature-programmed reduction or desorption, mass spectrometry (TPR-MS and TPD-MS), and X-ray photoelectron spectroscopy (XPS). While CHhyd and MWhyd powder catalysts exhibited the same XRD patterns indexed as pure perovskite structure, their surface physico-chemical properties were found to be strongly influenced by the preparation method. The effect of the nature of oxygen species, their amount and mobility, evidenced by temperature programmed experiments, on the catalytic properties in methane combustion in the presence and in the absence of hydrogen sulphide has been studied. MWhyd-La_0.8Ag_0.2MnO_3+δ catalysts were found to exhibit a much better performance in methane combustion together with higher resistance to sulphur poisoning than CHhyd catalysts.     

Thermodynamic properties of the NdBr3–MBr binary systems (M = Na,K)

Thixoforming involves heating different types of alloys to the semisolid state at high heating rates and forming in die-casting machines or conventional presses. At temperatures higher than the solidus and lower than the liquidus, the mush metal behaves like a high-viscosity thixotropic material. Therefore, determining the thermodynamic behavior of the solid-to-liquid transition is paramount to control thixoforming processes. This article describes a simple, novel experimental setup based on differential thermal analysis (DTA) for analyzing the phase transitions in an alloy heated using high heating rates typical of industrial applications. A365 alloy was chosen to demonstrate the effectiveness of the method as the phase transformations for this alloy in semisolid materials (SSM) processing are well understood. Samples were heated to 750 °C using constant linear heating rates of 5, 10, 15, 20, 25, 50, 75, 100 and 125 °C min in a Norax 25 kW 8 kHz induction furnace with an Omron E5CK temperature controller. AISI 316 austenitic stainless steel was used as the inert reference. Comparison of the results of DTA using the proposed method and the results of simulation with Thermo-Calc^® indicates that the proposed in situ DTA device and its method is suitable for analyzing phase transitions when high heating rates are used.     

New eco-friendly animal bone meal catalysts for preparation of chalcones and aza-michael adducts

ABSTRACT: Two efficient reactions were successfully carried out using Animal Bone Meal (ABM) and potassium fluoride or sodium nitrate doped ABMs as new heterogeneous catalysts under very mild conditions. After preparation and characterization of the catalysts, we first report their use in a simple and convenient synthesis of various chalcones by Claisen-Schmidt condensation and then in an aza-Michael addition involving several synthesized chalcones with aromatic amines. All the reactions were carried out at room temperature in methanol; the chalcone synthesis was also achieved in water environment under microwave irradiation. Doping ABM enhances the rate and yield at each reaction. Catalytic activities are discussed and the ability to re-use the ABM is demonstrated. RESULTS: For Claisen-Schmidt the use of ABM alone, yields never exceeded 17%. In each entry, KF/ABM and NaNO3/ABM (79-97%) gave higher yields than using ABM alone under thermic condition. Also the reaction proceeded under microwave irradiation in good yields (72-94% for KF/ABM and 81-97% for NaNO3/ABM) and high purity. For aza-Michael addition the use of ABM doped with KF or NaNO3 increased the catalytic activity remarkably. The very high yields could be noted (84-95% for KF/ABM and 81-94% for NaNO3/ABM). CONCLUSION: The present method is an efficient and selective procedure for the synthesis of chalcones anaaza-Michael adducts. The ABM and doped ABMs are a new, inexpensive and attractive solid supports which can contribute to the development of catalytic processes and reduced environmental problems.     

About b-weakly compact operators on Banach lattices

We characterize Banach lattices on which each positive operators is b-weakly compact and we derive some characterizations of KB-spaces.