Microwave‐assisted polycondensation of 4‐octylaniline with dibromoarylene

The Pd‐catalyzed polycondensation of 4‐octylaniline with various dibromoarylenes was carried out under microwave heating. Microwave heating led to a decrease in the reaction time and an increase in the molecular weight of the polymers as compared to conventional heating. Microwave heating also allowed the catalyst loading to be reduced to 1 mol %, yielding polymerization results that were comparable to those under conventional heating and 5 mol % catalyst. Investigations regarding field‐effect transistors and organic photovoltaic cells using the obtained poly(arylamine) with azobenzene units revealed that increasing the molecular weight of the polymer led to improved device performance, including hole mobility and power conversion efficiency. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 536–542     

Evaluation of fine structure of tubular zeolite NaA membrane by FTIR-ATR and FIB-TEM.

A zeolite NaA (LTA) membrane supported by an alumina porous support tube for pervaporation (PV) dehydration of ethanol was characterized by transmission electron microscopy (TEM) using a focused ion beam (FIB) thin-layer specimen preparation technique and by Fourier transform infrared attenuated total reflectance method (FTIR-ATR) using a diamond prism as the waveguide. FIB-TEM clearly presented cross-section images up to about 15 microm depth from the membrane surface. FTIR-ATR monitored the Si-O asymmetric stretching vibration spectrum. The Si-O spectrum was compared with the TEM image and their relationships were discussed. By combining the two methods, we could study the thickness of surface LTA crystals, the grain boundary, the LTA/alumina interface structure and the crystallinity and density of materials inside of the alumina porous support. Consequently, fine structure changes of the LTA membrane corresponding to the hydrothermal synthesis condition could be sensitively detected.     

χ polarization induced in molecular glass of conjugated compound by all-optical poling

The paper presents the first report on χ⁽²⁾ polarization induced in molecular glass of conjugated compound by all-optical poling. Transparent thin film of molecular glass of 1,4-bis[2-[4-[N,N-di(p-tolyl)amino]phenyl]vinyl]benzene (BTAPVB) was prepared using a spin-cast technique. Dipolar as well as octupolar components in BTAPVB contributed to the formation of photoinduced χ⁽²⁾ polarization. Growth rate of χ⁽²⁾ polarization has good linear relation with E_ω⁴E_2ω, which suggested that the simultaneous processes of two-photon (ω + 2ω) and three-photon (ω + ω + ω) excitation on the same electronic level contributed to the formation of photoinduced χ⁽²⁾ polarization.     

Existence of solution for Eguchi-Oki-Matsumura equation describing phase separation and order-disorder transition in binary alloys

In this paper we consider the Eguchi-Oki-Matsumura equation which consists of the fourth- and second-order coupled equations of parabolic type. It is shown that this system admits the unique global solution.     

Bis(pentafluorophenyl) disulfide as a hydrogen abstractor and an electron acceptor from the resulting radical intermediate

The pentafluorobenzenethiyl radical is an efficient hydrogen abstractor from an activated methylene or methine group and bis(pentafluorophenyl) disulfide is an efficient electron acceptor from the resulting radical intermediate. Thus benzyl-OTBS ether was easily converted into the corresponding pinacol, and 2-phenyl-1,3-dioxanes are converted into the monobenzoates of diols.     

Application of Automatic Chromatic Dispersion Compensation for Realization of All-Optical Network

We have studied the algorithm for the automatic chromatic dispersion compensation using bit error rate (BER) and Q-factor optimization for realization of dynamically reconfigurable all-optical network. We have made sure good performance using the compensation system by laboratory experiments.     

Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials

We investigated the structures induced by an irradiation of a near‐infrared (NIR) femtosecond laser pulse in dye‐doped polymeric materials {poly(methyl methacrylate) (PMMA), thermoplastic epoxy resin (Epoxy), and a block copolymer of methyl methacrylate and ethyl acrylate‐butyl acrylate [p(MMA/EA‐BA) block copolymer]}. Dyes used were classified into two types—type 1 with absorption at 400 nm and type 2 with no absorption at 400 nm. The 400‐nm wavelength corresponds to the two‐photon absorption region by the irradiated NIR laser pulse at 800 nm. Type 1 dye‐doped PMMA and p(MMA/EA‐BA) block copolymer showed a peculiar dye additive effect for the structures induced by the line irradiation of a NIR femtosecond laser pulse. On the contrary, dye‐doped Epoxy did not exhibit a dye additive effect. The different results among PMMA, p(MMA/EA‐BA) block copolymer, and Epoxy matrix polymers are supposed to be related to the difference of electron‐acceptor properties. The mechanism of this type 1 dye‐additive‐effect phenomenon for PMMA and p(MMA/EA‐BA) block copolymer is discussed on the basis of two‐photon absorption of type 1 dye at 400 nm by the irradiation of a femtosecond laser pulse with 800 nm wavelength and the dissipation of the absorbed energy to the polymer matrix among various transition processes. Dyes with a low‐fluorescence quantum yield favored the formation of thicker grating structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2800–2806, 2002     

Improved method for measurement of rhodanese activity using methanethiosulfonate as sulfur donor substrate and its application to human serum.

We have developed a sensitive method for the measurement of rhodanese activity in human serum which is based on the colorimetric method for the determination of thiocyanate produced from methanethiosulfonate and cyanide as substrates. Thiocyanate gives a red complex with ferric ion in an acidic condition. The present method is about 70-fold more sensitive than the conventional method using cyanide and thiosulfate as substrates and correlates well (r = 0.997) with the conventional method in bovine liver rhodanese. Within-run precision of the method is 0.91% for 420 units/l serum and the calibration curve is linear up to 1850 units/l. The normal value for human serum, determined by the present method on 31 healthy persons, was 20.9 +/- 20.0 units/l (mean +/- 2S.D.). Rhodanese activity was clearly elevated in some serum samples which were observed at abnormal values in some biochemical diagnostic tests and showed significant positive correlations with guanase activity (r = 0.728, p less than 0.01) and glutamic-oxalacetic transaminase activity (r = 0.625, p less than 0.01).     

Studies on the syntheses of heterocyclic compounds. CLXXIV. An approach to the synthesis of oxyacanthine and berbamine

Schotten-Baumann reaction of the amine (X) with 4-benzyloxy-3,4′-oxydiphenylacetyl chloride (XI) gave two amides, (XIIa) and (XIIb), which were cyclized to give the corresponding 3,4-dihydroisoquinolines, respectively. Methylation of the above 3,4-dihydro-isoquinolines, followed by hydrolysis, afforded the compounds having the same composition as berbamine (Ia) and oxyacanthine (Ib), whose structures are under examination.     

Elucidation of the Role of the Complex in Hydride Transfer Reaction between Methylene Blue and 1-Benzyl-1,4-dihydronictinamide by Effect of γ-Cyclodextrin

The kinetics of the hydride transfer reaction between Methylene Blue (MB⁺) and 1-benzyl-1,4-dihydronicotinamide (BNAH) were studied in 10% ethanol-90% water mixed solvents containing β- and γ-cyclodextrins (β-CD and γ-CD). The pseudo-first order rate constant shows kinetic saturation at high initial concentration of BNAH. This indicates the formation of a complex between MB⁺ and BNAH. The reaction was suppressed by addition of β-CD, but enhanced by addition of γ-CD. MB⁺ and BNAH were separately accommodated within the β-CD cavity and the cavity walls may protect the activity site of the reactants. On the other hand, in the MB⁺-BNAH-γ-CD system, the inclusion of the complex between MB⁺ and BNAH with γ-CD occurred. This effect of γ-CD can distinguish between the productive and non-productive nature of the complex.