MCM-41-SO3H: an efficient,reusable, heterogeneous catalyst for the one-pot,three-component synthesis of pyrano[3,2-b]pyrans

Research on Chemical Intermediates - MCM-41-SO3H, ordered mesoporous silica material MCM-41 with covalently anchored sulfonic acid groups, was used as a solid acid catalyst for the convenient,...     

Lanthanum-selective sensors based on 3-amino-2-mercapto-3H-quinazolin-4-one in PVC matrix

A new solvent polymeric membrane (PME) and coated graphite (CGE) electrodes based on 3-amino-2-mercapto-3H-quinazolin-4-one as a suitable carrier for La(III) ion are described. The sensors exhibited a Nernstian response for La(III) ion over a wide concentration range (3.0 × 10^?7 to 1.0 × 10^?1 M for PME and 1.0 × 10^?7 to 1.0 × 10^?1 M for CGE) with a slope of 20.1 ± 0.3 (PME) and 23.4 ± 0.4 (CGE) mV decade^?1. The lower detection limits by PME and CGE were 2.0 × 10^?7 and 7.1 × 10^?8 M, respectively. The potentiometric response of the proposed electrodes was independent of the pH of the test solution in the pH range 3.0–9.0 with a fast response time (<10 s). The applications of prepared sensors were demonstrated in the determination of lanthanum ions in spiked water sample and also utilized for indirect determination of fluoride content of two mouth wash preparation samples.     

Ni(II), Co(II), and Cu(II) complexes incorporating 2-pyrazinecarboxylic acid：Synthesis,characterization, electrochemical evaluation,and catalytic activity for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones

Three complexes containing 2-pyrazinecarboxylate (pzca–), including [Ni(pzca)2(H2O)2], [Co(pzca)2(H2O)2], and [Cu(pzca)2(H2O)2], have been synthesized and characterized using physico-chemical and spectroscopic methods. Furthermore, the structure of each complex was determined by single-crystal X-ray diffraction. All three complexes have an octahedral geometry, where the metal ion chelated by two carboxylate oxygens, two nitrogen atoms belonging to pyrazinic acid molecules, and two oxygen atoms of two water molecules. The catalytic activities of these complex-es were also investigated in the green synthesis of 2H-indazolo[2,1-b]phthalazine-triones by the reaction of hydrazine hydrate with an arylaldehyde, phthalic anhydride, and dimedone in acetic acid.     

Unexpected regio- and stereoselective [4 + 3] cycloaddition reaction of azomethine ylides with benzylidene thiazolidinediones: synthesis of pharmacologically active spiroindoline oxazepine derivatives and theoretical study

Molecular Diversity - An unexpected regio- and stereoselective [4?+?3] cycloaddition reaction of azomethine ylides with 5-benzylidenethiazolidine-2,4-diones has been successfully...     

An efficient and mild protocol for the synthesis of unsymmetrical ureas in the absence of catalyst and additives

<正>A new practical method for the synthesis of unsymmetrical ureas was achieved by reaction of phenylurea with primary and secondary amines under neutral and mild condition in very good yields.The reaction took place in refluxing dioxane and does not require any catalyst or additives.     

Regioselective synthesis of novel spiroindane-1,3-diones through 1,3-dipolar cycloaddition reactions

A facile synthesis of novel spiroindane-1,3-diones has been achieved via 1,3-dipolar cycloaddition of an azomethine ylide, generated in situ from ninhydrin and 1,2,3,4-tetrahydroisoquinoline, with the conjugated double bond of chalcone derivatives. The regiochemistry and structures of the cycloadducts were determined with spectroscopic data and by X-ray crystal structure analysis.     

Determination of BTEX Compounds by Dispersive Liquid–Liquid Microextraction with GC–FID

Rapid, inexpensive, and efficient sample-preparation by dispersive liquid–liquid microextraction (DLLME) then gas chromatography with flame ionization detection (GC–FID) have been used for extraction and analysis of BTEX compounds (benzene, toluene, ethylbenzene, and xylenes) in water samples. In this extraction method, a mixture of 25.0 μL carbon disulfide (extraction solvent) and 1.00 mL acetonitrile (disperser solvent) is rapidly injected, by means of a syringe, into a 5.00-mL water sample in a conical test tube. A cloudy solution is formed by dispersion of fine droplets of carbon disulfide in the sample solution. During subsequent centrifugation (5,000 rpm for 2.0 min) the fine droplets of carbon disulfide settle at the bottom of the tube. The effect of several conditions (type and volume of disperser solvent, type of extraction solvent, extraction time, etc.) on the performance of the sample-preparation step was carefully evaluated. Under the optimum conditions the enrichment factors and extraction recoveries were high, and ranged from 122–311 to 24.5–66.7%, respectively. A good linear range (0.2–100 μg L⁻¹, i.e., three orders of magnitude; r ² = 0.9991–0.9999) and good limits of detection (0.1–0.2 μg L⁻¹) were obtained for most of the analytes. Relative standard deviations (RSD, %) for analysis of 5.0 μg L⁻¹ BTEX compounds in water were in the range 0.9–6.4% (n = 5). Relative recovery from well and wastewater at spiked levels of 5.0 μg L⁻¹ was 89–101% and 76–98%, respectively. Finally, the method was successfully used for preconcentration and analysis of BTEX compounds in different real water samples.

     

Designing and Synthesis of Novel Amidated Fentanyl Analogs

Some new amidated fentanyl (=N‐[1‐(2‐phenylethyl)piperidin‐4‐yl]‐N‐phenylpropanamide) analogs with a 4‐(N‐phenylamido)piperidine scaffold and additional amide bonds have been designed and synthesized through Ugi four‐component reaction (Ugi‐4CR). Good‐to‐high yields, diversity‐oriented synthesis, and possible applications in drug discovery are advantages of this approach.     

Improvement of performance of tetraphenylporphyrin-based red organic light emitting diodes using WO3 and C60 buffer layers

One of the porphyrin derivatives, meso-tetraphenylporphyrin (TPP), has been synthesized and examined as an emitter material (EM) for efficient fluorescent red organic light-emitting diodes (OLEDs). By inserting a tungsten oxide (WO₃) layer into the interface of anode (ITO) and hole transport layer N,N′-Di-[(1-napthyl)-N,N′-diphenyl]-(1,1′-biphenyl)-4,4′-diamine (NPB) and by using fullerene (C₆₀) in contact with a LiF/Al cathode, the performance of devices was markedly improved. The current density–voltage–luminance (J–V–L) characterizations of the samples show that red OLEDs with both WO₃ and C₆₀ as buffer layers have a lower driving voltage and higher luminance compared with the devices without buffer layers. The red OLED with the configuration ITO/WO₃ (3 nm)/NPB (50 nm)/TPP (60 nm)/BPhen (30 nm)/C₆₀ (5 nm)/LiF (0.8 nm)/Al (100 nm) achieved the high luminance of 6359 cd/m² at the low driving voltage of 8 V. At a current density of 20 mA/cm², a pure red emission with CIE coordinates of (0.65; 0.35) is observed for this device. Moreover, a power efficiency of 2.07 lm/W and a current efficiency of 5.17 cd/A at 20 mA/cm² were obtained for the fabricated devices. The study of the energy level diagram of the devices revealed that the improvement in performance of the devices with buffer layers could be attributed to lowering of carrier-injecting barrier and more balanced charge injection and transport properties.     

Nanofluid flow in a catheterized tapered artery

Journal of Thermal Analysis and Calorimetry - This study was conducted with the aim of investigating the Newtonian nanofluid flow in a catheterized tapered artery through using a completely...