Alkenyl- and aryl[2-(hydroxymethyl)phenyl]dimethylsilanes: an entry to tetraorganosilicon reagents for the silicon-based cross-coupling reaction

Alkenyl- and aryl[2-(hydroxymethyl)phenyl]dimethylsilanes, highly stable tetraorganosilicon reagents, are found to react with aryl and alkenyl iodides in the presence of a palladium catalyst and K2CO3 as a base, significantly milder conditions compared with those ever reported for the silicon-based cross-coupling reactions. The reaction tolerates a wide range of functional groups, including silyl protectors, and allows a gram-scale synthesis to recover and reuse the silicon residue.     

Laser chemical processing of magnetic materials for recording-head application

A laser-induced thermochemical reaction has been used to etch single crystalline magnetic ferrite for industrial application to recording-head processing. Scanning focused Ar-ion laser irradiation to ferrite in flowing aqueous solutions of KOH or H₃PO₄ resulted in etch rates of 350–400 m/s with aspect ratios of up to 40. Metal-In-Gap (MIG) head structures with Sendust (FeAlSi) have been successfully fabricated using laser chemical processing. The MIG head fabricated by laser chemical processing showed better performance than that by conventional mechanical machining.Presented at LASERION '93, June 21–23, 1993 München (Germany)     

Study on the thermal stability of a chiral stationary phase coated on capillaries for GC

A chiral stationary phase prepared by bonding L -valine-t-butylamide to XE-60 has been coated on glass and metal capillaries. The performances of the chiral glass and metal columns were equivalent to those of commercial fused silica capillary columns. The thermal stability of the glass column was examined up to 280°C. It was found that no appreciable change in separation factor (α value) was observed up to 230°C. The α values gradually decreased between 240 and 260°C, and enantiomer separation was no longer achieved at 280°C. It was concluded that the allowable upper limit temperature of the chiral stationary phase is between 230 and 240°C in the isothermal mode, and ca 260°C in temperature-programmed mode.     

Fine Tunable,Redox Active Octapalladium Chains Supported by Linear Tetraphosphines,Leading to Dynamically 1D Self-Assembled Coordination Polymers

A series of the octapalladium chains supported by meso-Ph₂PCH₂P(Ph)CH₂P(Ph)CH₂PPh₂ (meso-dpmppm) ligands, [Pd₈(meso-dpmppm)₄(L)₂](BF₄)₄ (L=none ( 1 ), solvents: CH₃CN ( 2 a ), dmf ( 2 b ), dmso ( 2 c ), RN≡C: R=Xyl ( 3 a ), Mes ( 3 b ), Dip ( 3 c ), ^tBu ( 3 d ), Cy ( 3 e ), CH₃(CH₂)₇ ( 3 f ), CH₃(CH₂)₁₁ ( 3 g ), CH₃(CH₂)₁₇ ( 3 h )) and [Pd₈(meso-dpmppm)₄(X)₂](BF₄)₂ (X=Cl ( 4 a ), N₃ ( 4 b ), CN ( 4 c ), SCN ( 4 d )), were synthesized by using 2 a as a stable good precursor, and characterized by spectroscopic (IR, ¹H and ³¹P NMR, UV-vis-NIR, ESI-MS) measurements and X-ray crystallographic analyses (for 1 , 2 a , b , 3 a , b , e , f , 4 a – d ). On the basis of DFT calculations on the X-ray determined structure of 2 b ( [2b-Pd₈]⁴⁺ ) and the optimized models [Pd₈(meso-Ph₂PCH₂P(H)CH₂P(H)CH₂PH₂)₄(CH₃CN)₂]⁴⁺ ( [Pd₈Ph₈]⁴⁺ ) and [Pd₈(meso-H₂PCH₂P(H)CH₂P(H)CH₂PH₂)₄(CH₃CN)₂]⁴⁺ ( [Pd₈H₈]⁴⁺ ), with and without empirically calculating dispersion force stabilization energy (B3LYP-D3, B3LYP), the formation energy between the two Pd₄ fragments is assumed to involve mainly noncovalent interactions (ca. −70 kcal/mol) with four sets of interligand C−H/π interactions and Pd⋅⋅⋅Pd metallophilic one, while electron shared covalent interactions are almost canceled out within the Pd₈ chain. All the compounds isolated are stable in solution and exhibit characteristic absorption at ∼900 nm, which is assignable to a spin allowed HOMO to LUMO transition, and shows temperature dependent intensity change with variable absorption coefficients presumably due to coupling with some thermal vibrations. The structures and electronic states of the Pd₈ chains are found finely tunable by varying the terminal capping ligands. In particular, theoretical calculations elucidated that the HOMO-LUMO energy gap is systematically related to the central Pd−Pd distance (2.7319(6)–2.7575(6) Å) by two ways with neutral ligands L ( 1 , 2 , 3 ) and with anionic ligands X ( 4 ), which are reflected on the NIR absorption energy of 867–954 nm. The isocyanide terminated Pd₈ complexes ( 3 ) further reacted with excess of RNC (6 eq) to afford the Pd₄ complexes, [Pd₄(meso-dpmppm)₂(RNC)₂](BF₄)₂ ( 13 ), and the cyclic voltammograms of 2 a (L=CH₃CN), 3 , and 13 (R=Xyl, Mes, ^tBu, Cy) demonstrated wide range redox behaviors from 2{Pd₄}⁴⁺ to 2{Pd₄}⁰ through 2{Pd₄}²⁺↔{Pd₈}⁴⁺, {Pd₈}³⁺, and {Pd₈}²⁺ strings. The oxidized complexes, [Pd₄(meso-dpmppm)₂(RNC)₃](BF₄)₄ ( 16 ), were characterized by X-ray analyses, and the two-electron reduced chain of [Pd₈(meso-dpmppm)₄](BF₄)₂ ( 7 ) was analyzed by spectroscopic and electrochemical techniques and DFT calculations. Reactions of 2 a with 1 equiv. of aromatic linear bisisocyanide (BI) in CH₂Cl₂ deposited insoluble coordination polymers, {[Pd₈(meso-dpmppm)₄(BI)](BF₄)₄}_n ( 5 ), and interestingly, they were soluble in acetonitrile, ³¹P{¹H} and ¹H DOSY NMR spectra as well as SAXS curves suggesting that the coordination polymers may exist in acetonitrile as dynamically 1D self-assembled coordination polymers comprising ca. 50 units of the Pd₈ rod averaged within the timescale.     

Miniaturized molecularly imprinted polymer extraction method for the gas chromatographic analysis of flavonoids

In this study, the use of monolithic molecularly imprinted polymers in a micropipette tip format allowing the simple and fast extraction of flavonoids from standard solutions and a black tea sample is demonstrated. The imprinted polymer employed quercetin, methacrylic acid or 4‐vinylpyridine, and ethylene glycol dimethacrylate as template, functional monomer, and cross‐linker, respectively. Surface morphologies of the quercetin‐imprinted polymers and the corresponding nonimprinted polymers were characterized by SEM. Extraction of flavonoid standards was performed to evaluate the selectivity and recovery with these imprinted and nonimprinted polymers. Flavonoid compositions in aliquots eluted from the tips were identified using fast GC with flame ionization detection. Maximum specific capacities of 0.2, 5.7, and 16.0 mg/g for catechin, morin, and quercetin, respectively, were obtained with the imprinted polymer prepared with methacrylic acid, with the corresponding recoveries of 99.8, 98.8, and 95.4%, respectively. Efficient extraction by the quercetin‐imprinted polymer of epicatechin, catechin, and quercetin from an apple‐flavored black tea sample was achieved, with GC–MS employed for compound identification for both the tea and extracted samples.     

Topological Superconductivity in Cu(x)Bi(2)Se(3)

A topological superconductor (TSC) is characterized by the topologically protected gapless surface state that is essentially an Andreev bound state consisting of Majorana fermions. While a TSC has not yet been discovered, the doped topological insulator Cu(x)Bi(2)Se(3), which superconducts below ～3 K, has been predicted to possess a topological superconducting state. We report that the point-contact spectra on the cleaved surface of superconducting Cu(x)Bi(2)Se(3) present a zero-bias conductance peak (ZBCP) which signifies unconventional superconductivity. Theoretical considerations of all possible superconducting states help us conclude that this ZBCP is due to Majorana fermions and gives evidence for a topological superconductivity in Cu(x)Bi(2)Se(3). In addition, we found an unusual pseudogap that develops below ～20 K and coexists with the topological superconducting state.     

Rheology of poly(methyl methacrylate-<Emphasis Type="Italic">co</Emphasis>-styrene) particles suspended in water: effects of electrostatic surface layer

 Linear and nonlinear viscoelastic properties were examined for aqueous suspensions of monodisperse poly(methyl methacrylate-co-styrene) (MS) particles having the radius a ₀ =45 nm and the volume fractions φ=0.428−0.448. These particles had surface charges and the resulting electrostatic surface layer (electric double layer) had a thickness of t_s=5.7 nm. At low frequencies in the linear viscoelastic regime, the MS particles behaved approximately as the Brownian hard particles having an effective radius a _eff=a ₀ + t_s, and the dependence of their zero-shear viscosity η₀ on an effective volume fraction φ_eff (={a _eff/a ₀}³φ) agreed with the φ dependence of η₀ of ideal hard-core silica suspensions. In a range of φ_eff < 0.63, this φ_eff dependence was well described by the Brady theory. However, the φ_eff dependence of the high-frequency plateau modulus was weaker and the terminal relaxation mode distribution was narrower for the MS suspensions than for the hard-core suspensions. This result suggested that the electrostatic surface layer of the MS particles was soft and penetrable (at high frequencies). In fact, this “softness” was more clearly observed in the nonlinear regime: the nonlinear damping against step strain was weaker and the thinning under steady shear was less significant for the MS suspension than for the hard-core silica suspensions having the same φ_eff. These weaker nonlinearities of the concentrated MS particles with φ_eff∼ 0.63 (maximum volume fraction for random packing) suggested that the surface layers of those particles were mutually penetrating to provide the particles with a rather large mobility. Received: 10 July 2001 Accepted: 2 November 2001     

CuFe2O4 nanoparticles: a magnetically recoverable and reusable catalyst for the synthesis of 5-substituted 1H-tetrazoles

An efficient and economical protocol for the synthesis of 5-substituted 1H-tetrazoles from various nitriles and sodium azide is described using magnetically recoverable and reusable CuFe₂O₄ nanoparticles. A wide variety of aryl nitriles underwent [2+3] cycloaddition under mild reaction conditions to afford tetrazoles in good to excellent yields. The catalyst was magnetically separated and reused five times without significant loss of catalytic activity.     

Synthesis and Characterization of Ml2-Intercalated Bi-2212 Cuprates (M=Mn,Fe, Co,Cu, Zn)

Abstract

A series of new layered cuprates with the composition MI_2+xBi₂Sr₂CaCu₂O_8+y (x=0.6–0.9; M=Mn, Fe, Co, Cu, Zn) have been synthesized by the reaction of Bi₂Sr₂CaCu₂O₈ with each transition metal under an atmosphere of iodine at 400°C. The new cuprates, lamellar in shape, are crystallized in a tetragonal unit cell with the lattice parameters of a = 5.393–5.402 Å and c = 43.32–43.96 Å. A structure model for these cuprates are proposed in which the monoiodide anions are intercalated in the Bi₂O₂ layer to form a bilayer accompanying 3d metal cations. All of the intercalated cuprates are non-superconducting to be as high as 0.74–2.52 MΩ · cm in resistivity at room temperature.