Self-diffusion coefficient of water in Nafion-117 membrane with different monovalent counterions: a radiotracer study

The self-diffusion coefficient of water in Nafion-117 membrane in different cationic forms was measured by the transient radiotracer method, which is based on an analytical solution of Fick's second law. The self-diffusion coefficient of water in the membrane was obtained from the analysis of time-dependent isotopic-exchange rates of tritium tagged water between sample of Nafion-117 membrane and equilibrating water. This transient method does not require the knowledge of partition coefficient of water, which is an essential parameter in the radiotracer permeation method. In present work, self-diffusion coefficients of water in the Nafion-117 membrane with H⁺, Li⁺, Ag⁺, Na⁺, K⁺, Rb⁺ and Cs⁺ monovalent counterions were obtained. The values of logarithm of self-diffusion coefficients were found to vary linearly as a function of polymer volume fraction except for membrane sample with H⁺ counterions. The self-diffusion coefficient of water in Nafion-117 membrane with H⁺ counterions was significantly different from the trend observed in the variation of self-diffusion coefficient of water as a function of polymer volume fraction in the membrane with other monovalent counterions. This observation seems to suggest that the physical structure of Nafion-117 membrane in H⁺ form may be quite different from the Nafion-117 membrane with other monovalent counterions. The high self-diffusion coefficient of water (1.67 × 10⁻⁶ cm²/s) in Nafion-117 membrane with Cs⁺ counterions indicates that the ionic clusters in Nafion-117 membrane are well connected even at low water content (8.2 wt.%) in the membrane.     

Measurement of k0-Factors in Prompt Gamma-Ray Neutron Activation Analysis

The guided thermal neutron beam at 100 MW Dhruva research reactor facility of Bhabha Atomic Research Centre (BARC) was used to carry out prompt gamma-ray neutron activation analysis (PGNAA). The prompt k ₀-factors have been determined for the isotopes of the elements H, B, K, Co, Cu, Ca, Ti, Cr, Cd, Ba, Hg and Gd with respect to 1951 keV gamma-line of ³⁶Cl. The prompt k ₀-factors for H, Cl and Cu were also measured with respect to the 1381 keV gamma-line of ⁴⁹Ti. Different samples like NH₄Cl, Ti metal, cobalt chloride and other stoichiometric compounds and pure metals were used for this purpose. Prompt gamma-rays were accumulated using a 22% HPGe detector connected to a PC based 8k MCA in single mode counting. The energy calibration in the range of 100–8500 keV was carried out using gamma-rays from ¹⁵²Eu and ⁶⁰Co, and the prompt gamma-rays from ³⁶Cl whereas the absolute detection efficiency for this energy range was determined using ¹⁵²Eu and prompt gamma-rays from ³⁶Cl and ⁴⁹Ti.     

Determination of phosphorus using derivative neutron activation

For the determination of phosphorus in different matrices, the derivative neutron activation analysis is especially applicable to aqueous samples, since the conventional neutron activation analysis is not useful for the determination of phosphorus. Phosphorus when reacted with ammonium molybdate 4 hydrate and ammonium metavanadate forms molybdo vanado phosphoric acid. This complex is preconcentrated by extracting into methyl isobutyl ketone. The organic phase containing the molybdo vanado phosphoric acid is neutron activated and the phosphorus is determined through the activation product of ⁵²V. Preparation of this complex, its stoichiometry, application to trace level determination of phosphorus and improved detection limit are discussed. This method was applied for the analysis of industrial effluent samples.     

Colorimetric detection and fingerprinting of bacteria by glass-supported lipid/polydiacetylene films

Glass-supported films of lipids and polydiacetylene were applied for visual detection and colorimetric fingerprinting of bacteria. The sensor films comprise polydiacetylene domains serving as the chromatic reporter interspersed within lipid monolayers that function as a biomimetic membrane platform. The detection schemes are based on either visible blue-red transitions or fluorescence transformations of polydiacetylene, induced by amphiphilic molecules secreted by proliferating bacteria. An important feature of the new film platform is the feasibility of either naked-eye detection of bacteria or color analysis using conventional scanners. Furthermore, we find that the degrees of bacterially induced color transformations depend both on the bacterial strains examined and the lipid compositions of the films. Accordingly, bacterial fingerprinting can be achieved through pattern recognition obtained by recording the chromatic transformations in an array of lipid/PDA films having different lipid components.     

Multi-element analysis of soil from the north-western region of India by neutron activation analysis using the single comparator method with special reference to selenium toxicity

The single comparator (k₀) instrumental neutron activation analysis (INAA) was employed to determine the elemental composition of soil from the north-western region of India. The radiometric assay was carried out using high resolution gamma-ray spectrometry. Seventeen elements were detected including selenium whose concentration was found to be in the range of 1.02 to 6.79 mg/g.     

Chemically selective membrane optode for Cr(VI) determination in aqueous samples

A methodology for simultaneous preconcentration and determination of Cr(VI) from aqueous samples was developed using a membrane optode formed by physical inclusion of a Cr(VI) selective chromophore 1,5-diphenylcarbazide (DPC) into a plasticized cellulose triacetate matrix. The inclusion of an anion exchanger (Aliquat-336) was found to be effective for immobilization of both DPC and Cr(VI)-DPC complex in the optode matrix itself. The proportionality in intensity of the magenta color on the optodes loaded with varying amounts of Cr(VI) suggests its potential applications for screening of Cr(VI) in aqueous samples by visual colorimetry. On loading high amounts of Cr(VI) in the membrane optode, its color changes from magenta to yellow, which indicates the possibility of using it as a threshold detector for Cr(VI). The membrane optode was optimized in terms of obtaining maximum preconcentration efficiency for Cr(VI) and subsequent stable optical response proportional to the amount of Cr(VI) in the membrane optode sample. The membrane optodes were tested for Cr(VI) determination in tap water and seawater samples. Using this optode, Cr(VI) even at levels of 13.6 ppb could be quantitatively detected. The optodes developed in the present work were found to be stable, cost effective, easy to prepare and efficient for direct preconcentration and determination of Cr(VI) in a variety of aqueous samples using spectrophotometry. However, this membrane optode is for one time use only as the reaction of Cr(VI) with DPC is irreversible.