方酸染料在远红光区／近红外区对纳米晶二氧化钛电极的高效敏化作用

Four para-dialkylaminophenyl （PDAAP1-PDAAP4） bearing carboxyl groups were studied for application to the dye-sensitized solar cells （DSC）. It was found the short spacer CH2 between carboxyl and dialkylaminophenyl chromophore in PDAAP3 and PDAAP4 led to highly efficient monochromatic incident photon-to-current conversion efficiencies （IPCE）, however the long alkyl group C4H9 attached on aniline moieties in PDAAP2 and PDAAP4 favored improvement of open-circuit photovoltage. Thus, the solar cell sensitized by PDAAP4, having both short carboxyl groups CH2COOH and long alkyl groups C4H9, exhibited the IPCE maximum of 73% at 670 nm and overall energy conversion efficiency η of 3.06%, representing the highest IPCE and η values so far in dialkylaminophenyl-based organic dye-sensitized semiconductor solar cells. Taking advantage of the highly efficient sensitizing ability of PDAAP4 in far-red region, the data of IPCE above 630 nm of the solar cells were improved greatly by cosensitization with both N3 and PDAAP4. The influences of the TiO2 film thickness and the concentration of 4-tert-butylpyridine （TBP） in electrolyte were also investigated.     

一维链状配位聚合物{[Cu(μ-H_2L)(L)Cl](ClO_4)_3}_∞的合成、结构及磁性研究(L=N,N'-双(吡啶基-3-亚甲基)-1,5-二氮环辛烷)

设计合成了一个新型吡啶基二氮环配体L(N,N'-双(吡啶基-3-亚甲基)-1,5-二氮环辛烷)及其铜配位聚合物{[Cu(滋-H2L)(L)Cl](ClO4)3}∞(1),研究了此配合物的晶体结构、光谱及磁性质。该配合物属正交晶系,Pnma空间群,晶胞参数为a=3.5170(17)nm,b=1.0440(5)nm,c=1.1966(6)nm,V=4.394(4)nm3,Z=4。配体L以顺式螯合和反式桥联两种不同的配位形式将铜离子连接起来形成一维链状阳离子结构。     

Synthesis of Covalently-Linked Linear Donor-Acceptor Copolymers Containing Porphyrins and Oligothiophenes

5,15-Di-bithienyl porphyrin (1) and its Cu(Ⅱ), Zn (Ⅱ) complexes (2 and 3)[1] were polymerized according to Scheme 1 by chemical oxidation using FeCl3 as oxidant for making organic conductor, and the linear porphyrin-thiophene copolymers were obtained. The structures of the copolymers were identified by elemental analysis and IR spectra. The conductivity of poly 5,15-di-bithienyl porphyrin (4) doped with FeCl3 was measured to reach over 10-6 S/cm, which was in the range of semiconductor and higher than that of other porphyrin-thiophene copolymers prepared by Shimidzu. The higher conductivity may be due to the better conjugation between the thienyl group and the porphyrin ring. The thienylporphyrins 7 and 8 could not be polymerized under the similar conditions, but could be polymerized by electrochemical oxidation (working electrode: gold-plate electrode; counter electrode: platinum; reference: standard calomel electrode SEC; solvent: 0.1 mol·dm-3 n-Bu4NClO4 in dry MeCN).     

联吡啶[3,2-a：2’,3-c]-7-氮杂-吩嗪铜(I)配合物的合成、表征及其与DNA的相互作用

合成了邻菲罗啉衍生物联吡啶[3,2-a:2',3'-c]-7-氮杂-吩嗪(dpapz)及其铜(I)配合物[Cu(dpapz)₂]PF₆, 利用核磁共振氢谱(¹H NMR), 傅里叶变换红外(FTIR)光谱, 高分辨质谱(HR ESI-MS)等对合成的化合物进行了表征.采用紫外-可见吸收光谱,荧光光谱, DNA熔解温度实验和循环伏安方法研究了dpapz和[Cu(dpapz)₂]PF₆与小牛胸腺DNA(CT DNA)的相互作用. 配体dpapz与小牛胸腺DNA(CT DNA)作用时未观察到吸收峰红移并且减色效应较小(<30%), 且DNA熔解温度也上升较小(ΔT_m=7.8 ℃), 说明dpapz以沟槽结合的方式与CT DNA相互作用. 而[Cu(dpapz)₂]PF₆与CT DNA作用时, 可观测到较小的吸收峰红移(2-3 nm)和较大的减色效应(>50%), 同时DNA熔解温度上升较大(ΔT_m=11.1 ℃), 表明[Cu(dpapz)₂]PF₆以静电相互作用和部分扦插的方式与DNA结合. 溴乙锭(EB)荧光竞争实验和循环伏安实验进一步证实了这一结论. 配体dpapz和[Cu(dpapz)₂]PF₆与DNA的结合常数分别为2.88×10⁵和5.32×10⁵ mol·L^-1. 光照条件下, [Cu(dpapz)₂]PF₆产生单重态氧的能力与dpapz相当, 但产生超氧负离子自由基的能力要弱于dpapz. 活性氧猝灭实验表明, 超氧负离子自由基、单重态氧和羟基自由基均参与了dpapz和[Cu(dpapz)₂]PF₆对DNA的光损伤作用. [Cu(dpapz)₂]PF₆对DNA的亲和性要高于对dpapz的, 使得[Cu(dpapz)₂]PF₆对质粒DNA的光损伤效率明显强于dpapz.     

TiO2纳米颗粒对钌(II)三联吡啶配合物光损伤小牛胸腺DNA能力的影响

由于极短的激发态寿命, 钌(II)三联吡啶配合物对脱氧核糖核酸(DNA)的光损伤能力低下. 设计合成了三个钌(II)三联吡啶配合物[Ru(ttp)(tpy)]^2＋ (1), [Ru(ttp-COOH)(tpy)]^2＋ (2)和[Ru(ttp-COOH)(tpy-pyr)]^2＋ (3), 其中tpy为2,2':6',2"-三联吡啶, ttp为4′-(4-甲苯基)-2,2':6',2"-三联吡啶, ttp-COOH为4′-(4-羧基苯基)-2,2':6',2"-三联吡啶, tpy-pyr为4'-(1-芘基)-2,2':6',2"-三联吡啶. 比较了TiO₂纳米颗粒对它们光损伤小牛胸腺DNA的影响. 发现TiO₂纳米颗粒在空气和氩气条件下均可显著提高配合物3光损伤DNA的能力. TiO₂纳米颗粒和配合物3间的光诱导电子转移作用及其该作用生成的钌(III)物种可能是促进配合物3对DNA光损伤的主要原因.     

近红外光谱快速测定红花逆流提取过程中羟基红花黄色素A的含量

采用近红外光谱(NIRS)透射法对红花罐组式逆流提取过程中羟基红花黄色素A(Hydroxysafflor yellow A,HSYA)的含量进行快速无损的测定.在红花逆流提取过程中,以高效液相色谱法(HPLC)为对照分析方法,测定提取液中羟基红花黄色素A的含量,运用偏最小二乘(PLS)法建立NIR光谱与羟基红花黄色素A的HPLC分析值之间多元校正模型,并对逆流提取过程的未知样本进行含量预测.校正模型相关系数达到0.982,预测相关系数达到0.965,RMSEC和RMSEP分别为0.053和0.075,RSEC和RSEP分别为3.96%和5.25%.结果表明,NIRS可以作为一种准确、快速、无损的检测方法用于检测中药逆流提取过程有效成分含量变化规律.     

茶螺烷酮合成的新工艺

以α-紫罗兰酮为原料,经间氯过氧苯甲酸环氧化、甲醇钠开环、超声波辐射Pd/C催化甲酸铵选择性碳碳双键加H、硼氢化钠还原、脱水环化及乙酰丙酮亚钴催化烯丙位氧气氧化等6步反应,以总收率52.6％合成了食用香料2,6,10,10-四甲基-1-氧杂-螺[4.5]-6-癸烯-8-酮(茶螺烷酮)。 用IR、1H NMR、MS谱及元素分析等测试技术表征了产物的结构和组成。     

Herbarumin Ⅲ的立体选择性全合成

以正丁醛和1,5-戊二醇为起始原料, 以不对称烯丙基化、改良的Julia成烯反应和Yamaguchi内酯化为关键步骤, 通过13步反应, 立体选择性地合成了具有植物毒性的天然十元内酯化合物Herbarumin Ⅲ(3)及其差向异构体22.     

静动干涉流动的分离涡模拟研究

本文基于一种并行高精度的静动交接面处理方法,采用了SA模型及基于SA的分离涡模拟DES方法,进行了某压气机静动干涉流动的计算.研究表明对本文算例,在微小分离处,如20%到80%叶高处,DES与SA计算出的流动损失相差很小;而在大分离处,如叶根叶顶处,DES结果与SA差别较大,并且DES可更好地描述涡结构.在叶顶处,DES计算出比SA更强的泄漏流动,导致更大的损失.在叶根处,DES计算出了明显的静叶动态尾迹涡脱落现象,这一现象导致了与SA不一样的损失机理,即脱落涡与动叶头部相撞而产生时序效应,从而使计算损失较小.同时,本文研究结果与之前对孤立静叶的研究是相互验证的.     

LES study of diesel flame/wall interaction and mixing mechanisms at different wall distances

In this paper, the flame-wall interaction of reacting diesel spray under engine like conditions is investigated using large eddy simulations. The aim of this study is to understand the influence of the distance between the wall and the spray nozzle on the air entrainment rate, which is a key variable in formation/oxidation process of soot. Three experimental cases are investigated, a free jet case and two wall impingement cases with a distance from nozzle to wall of 30 mm and 50 mm, which are considered as characteristic wall impingement distances for light- and heavy-duty bores in diesel engines, respectively. The optical soot measurements imply a positive influence of wall on the rate of soot oxidation. Numerical simulations are employed to elucidate importance of different mechanisms for the air entrainment, i.e., air entrainment prior to flame lift-off position, enhanced mixing due to the wall impingement and enhanced mixing by the entrainment wave. The results show that oxidation process after the end of injection is driven by a different mixing mechanism depending on the distance to the wall. The 30 mm case resulted in a “mixing boost”, where the dominant mixing mechanism is the wall impingement vortex mixing, which gives rise to the fastest soot decay among the cases. The mixing in the 50 mm case is governed by a late wall impingement vortex mixing, giving rise to a low, but a constant air entrainment rate, i.e., a “mixing plateau”. The free jet case resulted in mixing governed by the entrainment wave mechanism. Both wall impingement cases have faster soot oxidation rate compared with the free jet case, but due to a different underlying mixing process. LES is shown to be able to replicate the line-of-sight measurements of natural OH* chemiluminescence and distribution of soot region from the optical soot diagnostics.