排序方式: 共有49条查询结果,搜索用时 15 毫秒
1.
2.
Nb 掺杂LiFePO4/C 的一步固相合成及电化学性能 总被引:1,自引:0,他引:1
用固相法一步合成了Nb掺杂的LiFePO4/C复合材料, 研究了Nb掺杂量对材料电化学性能的影响. 结果表明, Nb掺杂后LiFePO4/C复合材料的电化学性能明显提高. 在0.5C、1C和2C充放电倍率下, 名义成分为Li0.96Nb0.008FePO4/C正极材料的比容量分别为161、148和132 mAh•g−1, 已达到实用化水平. 阻抗谱和循环伏安特性测试显示, Nb掺杂有效地降低了复合材料电极的阻抗和极化, 说明Nb掺杂的主要作用是提高了LiFePO4的电子电导率. 相似文献
3.
采用氯化钾(KCl)和钠基普鲁士蓝(NPB)材料Na2-xMn[Fe(CN)6]z·yH2O为原料,通过离子交换法制备了掺钠钾基普鲁士蓝(NKPB)材料K1.9Na0.1Mn[Fe(CN)6]·0.4H2O。电化学测试表明,与用传统共沉淀法制备的钾基普鲁士蓝(KPB)材料K1.85Mn[Fe(CN)6]0.98□0.02·0.7H2O(□代表[Fe(CN)6]空位)相比,采用离子交换法制备的NKPB具有更高的容量(0.1C首次放电容量达136.3 mAh·g^-1)、较好的循环稳定性(0.5C经过100次循环,容量保持率为96.1%)和优异的倍率性能(5C和10C容量分别为87.6和68.4 mAh·g^-1)。NKPB优异的电化学性能与其高的钾含量、完整的晶体结构、钠离子掺杂、纳米级的颗粒尺寸,以及独特的开放框架结构有关。 相似文献
4.
碳包覆LiFePO4的一步固相法制备及高温电化学性能 总被引:8,自引:0,他引:8
Carbon coated LiFePO4 cathode material was synthesized by one-step solid-state reaction and characterized by X-ray diffraction (XRD), field-emission-scanning electron microscope (FESEM). Electrochemical performances of the material as cathode in lithium-ion battery were investigated at medium and elevated temperature (30 and 55 ℃) by galvanostatic charge-discharge and A.C. impedance tests. The results show that carbon coated LiFePO4 powder exhibits a well-crystallized olivine structure and spherical morphology with an average particle size of about 500 nm. Galvanostatic charge-discharge tests show that the reversible discharge capacity at 1 C and 1.5 C rates was improved from 121 and 105 mAh·g-1 at 30 ℃ to 136 and 123 mAh·g-1 at 55℃, respectively, while the enhancement of high temperature on electrochemical performance is less obvious at a rate lower than 0.5 C. Impedance spectra analyses indicate that the cathode material has a remarkably higher lithium-ion diffusivity at 55 ℃ than that at 30 ℃, which improves the electrochemical performance at high temperature. 相似文献
5.
6.
采用场发射扫描电镜(FESEM)和X射线能谱仪(EDXS)对感应熔炼高锰硅(HMS)中的第二相条纹的形貌和成份进行了研究,发现第二相条纹平行贯穿整个高锰硅晶粒,其条纹宽度约30nm,间距在5-30μm内,成份为MnSi.通过高分辨透射电镜(HRTEM)观察到MnSi条纹为短程有序而长程无序的非晶形态.采用选区电子衍射(SAED)确定了高锰硅的晶体结构,结果表明所获得的高锰硅为单一的Mn4Si7相,未观察到高锰硅其它的非公度结构.透射电镜(TEM)结果表明,熔炼的高锰硅经过球磨和热压后产生了大量缺陷和应力畴,与热压之前的熔锭材料相比有明显差异. 相似文献
7.
Mesoporous Co3O4 monolayer hollow-sphere array as electrochemical pseudocapacitor material 总被引:1,自引:0,他引:1
Xia XH Tu JP Wang XL Gu CD Zhao XB 《Chemical communications (Cambridge, England)》2011,47(20):5786-5788
A Co(3)O(4) monolayer hollow-sphere array with mesoporous walls exhibits high pseudocapacitances of 358 F g(-1) at 2 A g(-1) and 305 F g(-1) at 40 A g(-1), as well as excellent cycling stability for application as pseudocapacitors. 相似文献
8.
Xie Jian Imanishi Nobuyuki Hirano Atsushi Takeda Yashuo Yamamoto Osamu Zhao Xin-Bing Cao Gao-Shao 《Journal of Solid State Electrochemistry》2011,15(9):2031-2039
Ag and Ag2O thin films have been prepared by radio frequency magnetron sputtering on Cu substrates and have been characterized by X-ray
diffraction, scanning electron microscope and atomic force microscope. The electrochemical performance of the thin films has
been studied by galvanostatic cycling and cyclic voltammetry. The potential dependence of Li-ion chemical diffusion coefficients,
[(D)\tilde]\textLi {\widetilde{D}_{\text{Li}}} , of the films has been determined by galvanostatic intermittent titration technique and electrochemical impedance spectroscopy.
It is found that Li-ion chemical diffusion coefficients of the Ag film range from 10−16 to 3 × 10−14 cm2 s−1. The Ag/Li2O composite that is formed from Ag2O after the first cycle exhibits higher
[(D)\tilde]\textLi {\widetilde{D}_{\text{Li}}} values than the Ag film, especially at a low Li-intercalation content. The phase transitions in the two-phase region cause
a significant decrease of chemical diffusion coefficients. 相似文献
9.
优化碳包覆对正极材料LiFePO4/C高倍率性能的影响 总被引:2,自引:0,他引:2
碳包覆层的结构和形态对LiFePO4正极材料的电子电导率影响很大. 本文以聚丙烯和葡萄糖为碳源, 二茂铁为催化剂前驱体, 采用原位固相法合成LiFePO4/C复合材料, 并对其微观结构和形貌, 碳的结构与含量, 电化学性能进行分析. 结果表明, 聚丙烯热解形成的碳包覆层石墨化程度高, 可提高材料的高倍率放电性能. 二茂铁的加入有助于优化包覆层的碳结构. 制备的LiFePO4/C复合材料具有优异的高倍率电化学性能, 10C (1C=170 mA·g-1)放电比容量达到145 mAh·g-1. 相似文献
10.
Li4Ti5O12/(Ag+C)电极材料的固相合成及电化学性能 总被引:1,自引:0,他引:1
以Li2CO3,TiO2为原料,葡萄糖为碳源,采用固相煅烧工艺合成了亚微米级的Li4Ti5O12/C复合负极材料。并将之与AgNO3复合,采用固相方法制备出了Ag表面修饰的Li4Ti5O12/(Ag+C)复合材料。采用XRD、SEM和TEM测试方法对材料的微结构进行了表征。结果表明,C的存在对Ag单质在Li4Ti5O12/C颗粒表面的大量形成起到了积极的促进作用,从而很大程度地提高了Li4Ti5O12/C的电导率,因此有效地改善了其电化学性能。在1C倍率下,Li4Ti5O12/(Ag+C)复合材料的首次放电容量达到了164 mAh·g-1。 相似文献