Development and validation of LC–MS/MS method for amlexanox in rat plasma and its application in preclinical pharmacokinetics

Amlexanox, an anti-inflammatory and anti-allergic agent, has been widely used clinically for the treatment of canker sores, asthma, and allergic rhinitis. Recently, amlexanox has received considerable attention in curing nonalcoholic fatty liver diseases and hepatitis virus infection. Herein, we first established a sensitive high-performance liquid chromatography-tandem mass spectrum (LC–MS/MS) method for the determination of amlexanox in rat plasma. Propranolol was used as the internal standard (IS). Using a simple protein precipitation method, the amlexanox and IS were separated with Capcell Pak C18 column (2.0 × 50 mm, 5 μm) and eluted with water and acetonitrile each containing 0.1% formic acid using gradient elution condition at a flow rate of 0.4 mL·min⁻¹. Amlexanox and IS were detected by a triple quadrupole mass in multiple reactive monitoring (MRM) under the transitions of m/z 299.2 → 281.2 and m/z 259.9 → 116.1 with positive electrospray ionization, respectively. The calibration curves of amlexanox were established with the range of 50 to 2000 ng·mL⁻¹ (r² > 0.99). The validation method consisted of selectivity, accuracy, precision, carryover effect, matrix effect, recovery, dilution effect, and stability. The fully validated method was successfully applied to the pharmacokinetic study of amlexanox in Wistar rats.     

Electrochemical behavior of poly(ferrocenyldimethylsilane-b-dimethylsiloxane) films

The electrochemical behavior of poly(ferrocenyldimethylsilane-b-dimethylsiloxane) (PFDMS-b-PDMS) films deposited on a glassy carbon electrode was investigated by means of cyclic voltammetry (CV). The influences of the solvent, film thickness, temperature, and PDMS block length in PFDMS-b-PDMS on the electrode process were discussed. It was found that in 0.1 M aqueous LiClO(4) the electrochemical processes of the films on a glassy carbon electrode were complex and have a low rate of electron transport and mass diffusion. The kinetic parameters obtained indicated that the electrode process was controlled by both the electrode reaction and mass diffusion.     

Study on synthesis of two-armed polymers containing a crown ether core and their self-assembly behaviors in selective solvents

A series of well-defined two-armed polymers containing a crown ether core, poly(stearyl methacrylate)-crown ether-poly(stearyl methacrylate) (PSMA-crown-PSMA), with different molecular weight were synthesized via atom transfer radical polymerization (ATRP). The resultant polymers were characterized by ¹H NMR and GPC. The self-assembly behaviors of this kind of polymer in selective solvents were studied by TEM, and it was found that polymers with different molecular weight can directly self-assemble into hollow spheres, solid spheres and a monolayer film with regular pores by varying molecular weight and water content. The possible molecular packing motels for their self-assembly behaviors were proposed.     

Formyl-selective deuteration of aldehydes with D2O via synergistic organic and photoredox catalysis

Formyl-selective deuteration of aldehydes is of high interest for labeling purposes and for optimizing properties of drug candidates. Herein, we report a mild general method for formyl-selective deuterium labeling of aldehydes with D₂O, an inexpensive deuterium source, via a synergistic combination of light-driven, polyoxometalate-facilitated hydrogen atom transfer and thiol catalysis. This highly efficient, scalable reaction showed excellent deuterium incorporation, a broad substrate scope, and excellent functional group tolerance and selectivity and is therefore a practical method for late-stage modification of synthetic intermediates in medicinal chemistry and for generating libraries of deuterated compounds.

Formyl-selective deuteration of aldehydes with D₂O mediated by the synergistic combination of light-driven, polyoxometalate-facilitated HAT and thiol catalysis is reported.     

Co3O4/UiO-66@α-Al2O3陶瓷膜对VOCs废气的分离催化性能

以α-Al₂O₃为支撑层, UiO-66为分离层, Co₃O₄为催化层, 构建了Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜.对其形貌结构进行了表征, 并研究了其对挥发性有机物(VOCs)的分离催化性能. 结果表明, 该陶瓷膜对喷涂行业废气中苯与吡啶两种主要成分体现出良好的分离性, 透过侧的气体中吡啶与苯的摩尔浓度比值可由给料侧的1提高至17; 体系中引入臭氧后, 给料侧苯的浓度明显降低, 其去除率可达到89%. 透过侧的吡啶去除率仅为27%, 得到了较大程度的保留, 剩余的吡啶经收集后可进行单独的深度处理. Co₃O₄/UiO-66@α-Al₂O₃陶瓷膜在对喷涂行业废气中苯成分高效降解的同时, 能够有效解决喷涂行业废气处理过程中氮氧化物的排放问题, 有望成为喷涂行业废气预处理工艺的理想选择.     

Hydrothermal synthesis and electrochemical performance of Fe-doped Co hydroxide electrode materials

Journal of Solid State Electrochemistry - In order to meet the growing energy demand, it is of great significance to develop high-performance electrochemical energy storage materials. In this...     

A Phototheranostic Strategy to Continuously Deliver Singlet Oxygen in the Dark and Hypoxic Tumor Microenvironment

Continuous irradiation during photodynamic therapy (PDT) inevitably induces tumor hypoxia, thereby weakening the PDT effect. In PDT‐induced hypoxia, providing singlet oxygen from stored chemical energy may enhance the cell‐killing effect and boost the therapeutic effect. Herein, we present a phototheranostic (DPPTPE@PEG‐Py NPs) prepared by using a 2‐pyridone‐based diblock polymer (PEG‐Py) to encapsulate a semiconducting, heavy‐atom‐free pyrrolopyrrolidone‐tetraphenylethylene (DPPTPE) with high singlet‐oxygen‐generation ability both in dichloromethane and water. The PEG‐Py can trap the ¹O₂ generated from DPPTPE under laser irradiation and form a stable intermediate of endoperoxide, which can then release ¹O₂ in the dark, hypoxic tumor microenvironment. Furthermore, fluorescence‐imaging‐guided phototherapy demonstrates that this phototheranostic could completely inhibit tumor growth with the help of laser irradiation.     

The impact of asymptomatic individuals on the strength of public health interventions to prevent the second outbreak of COVID-19

Nonlinear Dynamics - The pandemic of coronavirus disease 2019 (COVID-19) has threatened the social and economic structure all around the world. Generally, COVID-19 has three possible transmission...     

Development of a Genus-Universal Nucleotide Signature for the Identification and Supervision of Ephedra-Containing Products

Ephedra plants generally contain ephedrine alkaloids, which are the critical precursor compounds of methamphetamine (METH). METH could cause serious physical and mental damage, and therefore Ephedra materials are strictly in supervision internationally. However, unlawful utilization of Ephedra herbs and its products still exist. Thus, it is imperative to establish a universal method for monitoring Ephedra ingredients in complex mixtures and processed products. In this study, 224 ITS2 sequences representing 59 taxa within Ephedra were collected, and a 23-bp genus-level nucleotide signature (GTCCGGTCCGCCTCGGCGGTGCG) was developed for the identification of the whole genus. The specific primers MH-1F/1R were designed, and 125 individuals of twelve Ephedra species/varieties were gathered for applicability verification of the nucleotide signature. Additionally, seven batches of Chinese patent medicines containing Ephedra herbs were used to test the application of the nucleotide signature in complex and highly processed materials. The results demonstrated that the 23-bp molecular marker was unique to Ephedra and conserved within the genus. It can be successfully utilized for the detection of Ephedra components in complex preparations and processed products with severe DNA degradation. The method developed in this study could undoubtedly serve as a strong support for the supervision of illegal circulation of Ephedra-containing products.     

丝网印刷柔性电子器件

有机电子器件的主要优势之一是溶液可处理性,这使得可以通过多种印刷方法制备有机电子器件。丝网印刷作为一种十分成熟的印刷方法,被广泛应用于微电子器件的制备。本文主要从丝网印刷的组成、影响丝网印刷精密度的因素以及丝网印刷在场效应晶体管、太阳能电池、有机发光二极管等柔性电子器件制备中的应用分别作以介绍,并对目前丝网印刷在印刷柔性电子器件中存在的困难和挑战作以总结。