微波辐射下三组分“一锅法”合成5-芳基-1,5,6,7,8,9-六氢化-2H-吡唑[5,4-b]并喹啉-6-酮

在微波辐射下以芳醛、1,3-环己二酮或达米酮和氨基吡唑为原料, 用乙二醇作能量转移剂, 三组分“一锅法”快速合成了一系列吡唑[5,4-b]并喹啉类化合物. 该方法速度快(30～90 s), 产率高(88%～98%), 环境友好. 产物结构通过红外光谱、核磁共振谱和元素分析证实, 化合物4e的单晶经X射线衍射分析, 进一步确证了产物结构.     

色谱灰色数模的建立及其应用研究(Ⅰ)──连续GM(1,N)模型的建立及色谱保留行为的预测

应用灰色系统理论和最小二乘原理，推导出连续GM（1，N）模型，并将该模型用于高效液相色谱中溶质保留行为的预测．研究了烷烃、烷基苯及对羟基苯甲酸酯等化合物的容量因子与流动相组成、容量因子与碳数、保留时间与温度、保留时间与碳数的关系，并建立了相应的数学模型，经验证，预测结果良好．     

Synthesis and Crystal Structure of 1,7,7-Trimethyl- 4-（4-methoxyphenyl）-4,6,7,8-tetrahydroquinoline- 2,5（1H,3H）-diones under Microwave Irradiation

1 INTRODUCTION Various quinolone derivatives are known to dis- play interesting biological properties ranging from microbial activity to cytotoxicity[1]. They have been reported as antiviral (HIV-1)[2] and antitumor agents[3] as well as used as tubulin[4], topoisomerase[5] and thrombocyte inhibitors[6]. As a member of the quino- lone family, substituted N-phenyl-2-quinolones re-present the structural basis of many biologically active compounds, such as protein kinase inhibitors, immunodu…     

活化条件对活性碳纳米管比表面积的影响

以KOH为活化剂, 研究了多壁碳纳米管在制备活性碳纳米管过程中四个重要影响因素: 活化剂用量、活化温度、活化时间和活化过程中保护气体的流速对所得活性碳纳米管BET比表面积的影响并解释了原因. 研究表明上述四个因素都会对活性碳纳米管的比表面积产生较大的影响, 其中活化剂用量的影响最大, 在研究范围内可引起比表面积增大约241 m²•g^-1. 在这四个影响因素中除活性碳纳米管的比表面积随活化温度的增加而不断增加外, 其他三个影响因素的变化都会使活性碳纳米管的比表面积出现最大值, 而且四个影响因素的改变, 都不改变活性碳纳米管的孔洞主要是中孔和大孔的特点.     

Unraveling the Mechanisms of the Excited-State Intermolecular Proton Transfer (ESPT) for a D-π-A Molecular Architecture

Precise revealing the mechanisms of excited-state intermolecular proton transfer (ESPT) and the corresponding geometrical relaxation upon photoexcitation and photoionization remains a formidable challenge. In this work, the compound (E)-4-(((4H-1,2,4-triazol-4-yl)imino)methyl)-2,6-dimethoxyphenol (TIMDP) adopting a D-π-A molecular architecture featuring a significant intramolecular charge transfer (ICT) effect has been designed. With the presence of perchloric acid (35 %), TIMDP can be dissolved through the formation of a HClO₄–H₂O–OH(TIMDP)–N(TIMDP) hydrogen-bonding bridge. At the ground state, the ICT effect is dominant, giving birth to crystals of TIMDP. Upon external stimuli (e.g., UV light irradiation, electro field), the excited state is achieved, which weakens the ICT effect, and significantly promotes the ESPT effect along the hydrogen-bonding bridge, resulting in crystals of [HTIMDP]⁺ ⋅ [H₂O] ⋅ [ClO₄]⁻. As a consequence, the mechanisms of the ESPT can be investigated, which distorted the D-π-A molecular architecture, tuned the emission color with the largest Stokes shift of 242 nm, and finally, high photoluminescence quantum yields (12 %) and long fluorescence lifetimes (8.6 μs) have achieved. These results not only provide new insight into ESPT mechanisms, but also open a new avenue for the design of efficient ESPT emitters.     

Nanostructures for Electrocatalytic CO2 Reduction

One of the most effective ways to cope with the problems of global warming and the energy shortage crisis is to develop renewable and clean energy sources. To achieve a carbon-neutral energy cycle, advanced carbon sequestration technologies are urgently needed, but because CO₂ is a thermodynamically stable molecule with the highest carbon valence state of +4, this process faces many challenges. In recent years, electrochemical CO₂ reduction has become a promising approach to fix and convert CO₂ into high-value-added fuels and chemical feedstock. However, the large-scale commercial use of electrochemical CO₂ reduction systems is hindered by poor electrocatalyst activity, large overpotential, low energy conversion efficiency, and product selectivity in reducing CO₂. Therefore, there is an urgent need to rationally design highly efficient, stable, and scalable electrocatalysts to alleviate these problems. This minireview also aims to classify heterogeneous nanostructured electrocatalysts for the CO₂ reduction reaction (CDRR).     

强流脉冲电子束作用下金属锆的微观结构与应力状态

利用强流脉冲电子束 (HCPEB) 技术对金属纯锆进行表面处理, 采用X射线衍射, 扫描电子显微镜及透射电子显微镜详细分析了辐照诱发的表层微观结构和缺陷. X射线分析结果表明, HCPEB辐照后在材料表层诱发幅值为GPa量级的压应力, 并形成{0002}, {1012}, {1120}及{1013}织构. 表层微观结构观察表明, 与其他金属材料不同, HCPEB辐照在材料表层诱发的熔坑数量极少, 多次轰击甚至几乎没有表面熔坑的形成. 此外, 在快速的加热和冷却状态下, 在表面熔化层形成大量的超细晶粒结构, 同时诱发马氏体相变和强烈的塑性变形. 1次HCPEB辐照后表层内形成的变形微结构以位错为主, 孪晶数量较少; 5 次辐照样品的位错密度迅速增高, 孪晶数量也显著增加; 10次辐照后样品中的变形微结构以变形孪晶为主, 且出现二次孪晶现象. 表层晶粒内部变形的晶体学特征不仅决定了表层的织构演化行为, 而且还起到细化晶粒的作用, 为纯锆及锆合金表面强化提供了一条有效的途径. 关键词： 强流脉冲电子束 纯锆 微观结构 应力状态     

关于部分偏振光能量传递和偏振态的光线椭圆分析方法

部分偏振光传播时的光强和偏振态变化情况比较复杂, 尤其是当大数值孔径成像时, 光束的偏振态还会影响成像质量. 本文提出一种用于分析部分偏振光能量传递和偏振态的光线椭圆方法, 采用光线椭圆叠加的办法来分析光束在各向同性的均匀介质中传输时能量和偏振态的变化情况, 同时直观性好, 计算量小. 论文最后, 对大数值孔径、 高像质的齐明透镜系统讨论了入射无偏振光的能量、 偏振态变化, 以及偏振效应问题. 结果表明, 大数值孔径使成像光束中TM偏振光强度相对增加, 影响成像对比度; 提高像方介质的折射率, 会改善此种偏振效应问题.     

多孔软硬磁Ni0.5Zn0.5Fe2O4/SrFe12O19复合纤维制备及吸波性能

通过静电纺丝技术制备了多孔软硬磁Ni_0.5Zn_0.5Fe₂O₄/SrFe₁₂O₁₉复合纤维,利用综合热重分析仪（TG-DSC）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线能谱仪（EDS）和矢量网络分析仪（VNA）等对复合纤维的晶体结构、微观形貌和电磁性能进行了表征,研究了不同软硬磁质量比对纤维结构和性能的影响。结果表明：900℃下制备的复合纤维具有立体多孔结构,软硬磁质量比为1∶3时,复合纤维的比表面积达到55 m²·g^-1。吸波性能测试结果显示,当吸波剂涂层厚度为3.5 mm时,复合纤维在10.6 GHz处反射损失（R_L）值达到-31.9 dB,在2~18 GHz频率范围内,R_L值小于-10 dB的吸收带宽达到10.5 GHz,覆盖了整个X波段（8.2~12.4 GHz）和Ku波段（12.4~18 GHz）,显示出优异的宽波段吸收性能。     

A proximity-dependent surface hybridization strategy for constructing an efficient signal-on electrochemical DNAzyme sensing system

A proximity-dependent surface hybridization strategy is employed for designing a "signal-on" electrochemical DNAzyme biosensor. By taking advantage of the high sensitivity of the PDSH strategy, and by realizing the enzymatic hydrolysis reaction in a homogenous system with a unimolecular design, the proposed biosensor shows a very high sensitivity to target molecules.