Effect of C layer on the structures and magnetic properties of (0 0 1)-oriented [C/CoPt]n/Ag films

CoPt/Ag and [C/CoPt]n/Ag thin films have been prepared onto the glass substrates by magnetron sputtering. We investigated the evolution of texture and magnetic properties of CoPt/Ag and [C/CoPt]n/Ag films. The results show that C-doping plays an important role in improving (0 0 1) texture, improving the order parameter S, reducing the intergrain interactions, and making the magnetization reversal mechanism more close to Stoner-Wolfarth rotational mechanism. The growth mechanism of (0 0 1) texture also seems to be related strongly to the films thickness. Our results show that the highly (0 0 1)-oriented films with ordered fct phase have a significant potential for the perpendicular media of extremely high-density recording.     

A study of the effect of ZrO2 on the magnetic properties of FePt/ZrO2 multilayer

Fe_xPt_100−x(30 nm) and [Fe_xPt_100−x(3 nm)/ZrO₂]₁₀ (x = 37, 48, 57, 63, 69) films with different ZrO₂ content were prepared by RF magnetron sputtering technique, then were annealed at 550 °C for 30 min. This work investigates the effect of ZrO₂ doping on the microstructural evolution, magnetic properties, grain size, as well as the ordering kinetics of FePt alloy films. The as-deposited films behaved a disordered state, and the ordered L1₀ structure was obtained by post-annealing. The magnetic properties of the films are changed from soft magnetism to hard magnetism after annealing. The variation of the largest coercivities of [Fe_xPt_100−x/ZrO₂]₁₀ films with the Fe atomic percentage, x and differing amounts of ZrO₂ content reveals that as we increase the ZrO₂ content we must correspondingly increase the amount of Fe. This phenomenon suggests that the Zr or O atoms of ZrO₂ preferentially react with the Fe atoms of FePt alloy to form compounds. In addition, introducing the nonmagnetic ZrO₂ can reduce the intergrain exchange interactions of the FePt/ZrO₂ films, and the interactions are decreased as the ZrO₂ content increases, the dipole interactions are observed in FePt/ZrO₂ films as the ZrO₂ content is more than 15%.     

大面积玻璃RPC模型与性能测试

介绍了可用于粒子探测的大面积玻璃高阻板探测器RPC(Resistive Plate Chamber).使用两块间隔2mm的普通浮法玻璃作为电极,其中充入流动的混合气体(氩气+异丁烷+F134A),工作高压约9600V;性能测试结果,其单室效率可达97%,时间分辨可达到1.8ns.     

氢氧化铝镁正电溶胶制备及性能研究

氢氧化铝镁正电溶胶制备及性能研究侯万国，张春光，孙德军，梁晓丽，王果庭（山东大学胶体与界面化学研究所，济南，２５０１００）关键词混合金属氢氧化物，溶胶，超细颗粒混合金属氢氧化物的合成、组成及结构等已得到广泛研究［１，２］．我们也曾用插入法合成了混合金...     

全反式维甲酸合钇(Ⅲ)配合物对DNA的切割和键合作用(英)

以紫外光谱、荧光光谱、粘度法和凝胶电泳方法研究了全反式维甲酸合钇(Ⅲ)配合物与DNA的作用。结果表明，该配合物能在生理条件下比配体和金属离子更有效地切割质粒DNA，体系离子强度和pH值的变化对配合物的切割活性有较大影响，自由基捕捉剂的加入不影响配合物的切割活性。该配合物对DNA的切割可能通过水解机理进行。该配合物可使DNA的粘度增加，使EB-DNA体系的荧光强度和DNA溶液的紫外吸收强度降低。据此推断，该配合物主要以嵌入方式与DNA作用。     

一种新型可溶性高聚物负载手性配体的合成及其催化烯烃的不对称双羟化反应研究

在碱性条件下, 聚乙二醇单甲醚(HO\|OPEG\|OMe)与1,4-二氟蒽醌进行亲核单取代反应生成中间体F\|AQN-OPEG-OMe, 产率88%. F-AQN-OPEG-OMe与奎宁锂进行亲核取代反应, 以95.6%的产率得到新型手性配体QN\|AQN\|OPEG-Me. QN-QN\|OPEG-Me与OsO4原位配位生成的均相催化剂在4种烯烃的不对称双羟化反应中表现出较高的对映选择性(92%~99%e.e.)和化学产率(80%~94%). 催化活性和立体选择性与Sharpless手性配体(DHQ)2AQN相当. 反应结束后, 配体可用乙醚沉淀回收, 循环使用5次, 催化剂的催化活性和立体选择性无明显改变, 配体的回收率均在95%~97%之间.     

Aggregation of sodium 1-(n-alkyl)naphthalene-4-sulfonates in aqueous solution: micellization and microenvironment characteristics

In aqueous solution, the micellization and microenvironment characteristics of the micelle assemblies of three anionic surfactants, sodium 1-(n-alkyl)naphthalene-4-sulfonates (SANS), have been investigated by steady-state fluorescence and time-resolved fluorescence decay techniques using pyrene, Ru(bpy)3(2+), and 1,6-diphenyl-1,3,5-hexatriene as fluorescence probes. The critical micelle concentrations (cmc's), effective carbon atom numbers (neff's), hydrophilic-lipophilic balances (HLBs), mean micelle aggregation numbers, micropolarities, and microviscosities of these surfactant micelles have been determined. The logarithmic cmc of the alkylnaphthalene sulfonates decreases linearly with an increase in the neff. The logarithmic aggregation number of the alkylnaphthalene sulfonates increases linearly with an increase in the neff. However, in contrast to the alkylsufonates and the alkylbenzene sulfonates, the aggregation for these alkylnaphthalene sulfonate molecules is less sensitive to the increase in the neff. The micropolarity of these alkylnaphthalene sulfonate micelles is less sensitive to the increase in the alkyl chain length and is lower than that of sodium dodecyl sulfate (SDS). The microviscosity of these alkylnaphthalene sulfonate micelles increases with an increase in the alkyl chain length and is lower than those of nonionic surfactants and zwitterionic surfactants. These results suggest that naphthyl rings have a notable effect on the micellization of SANS.     

Bola型阴离子表面活性剂与溴化十二烷基三乙铵混合体系的表面性质与聚集行为

研究了具有简单结构的bola型阴离子表面活性剂二十酸二钠（C_(20)Na_2)与 阳离子型普通表面活性剂溴化十二烷基三乙铵（C_(12)Et_3）混合体系的表面性质 ，发现混合体系的cmc和γ_(cmc)比C_(12)Et_3单一体系未有显著降低。以负染色 ，FF-TEM，动态光散射（DLS）及粘度方法研究了混合体系的聚集行为，发现混合 体系中同时形成球形囊泡和管状聚集体，提出了产生这种聚集行为的机制。     

Studies of synergism for lowering dynamic interfacial tension in sodium alpha-(n-alkyl) naphthalene sulfonate/alkali/acidic oil systems

Alkylnaphthalene sulfonates with high purity were selected as model components to research synergism for lowering interfacial tension (IFT) in surfactant/alkali/acidic oil systems. The dynamic IFTs between alkylnaphthalene sulfonates with different alkyl chain length and n-decane, oleic acid model oil, or Shengli crude oil were measured. The results showed that the alkylnaphthalene sulfonates with different alkyl chain lengths had different synergism with different acidic components and their ionized acids under the same conditions. The synergism for lowering dynamic IFT in alkylnaphthalene sulfonate/alkali/acidic oil systems was controlled by alkylnaphthalene sulfonate concentration, alkyl chain length, alkali concentration, alkali type, and oleic acid concentration: optimal physicochemical conditions were necessary to the best synergism. This indicates that the synergism among added surfactant acidic components in crude oil and their ionized acids is controlled by the ratio of their interfacial concentrations.     

Theoretical study of the reaction of Cu with OCS

The reactivity of Cu⁺ with OCS on both singlet and triplet potential energy surfaces (PES) has been investigated at the UB3LYP/6-311+G(d) level. The object of this investigation was the elucidation of the reaction mechanism. The calculated results indicated that both the C–S and C–O bond activations proceed via an insertion–elimination mechanism. Intersystem crossing between the singlet and triplet surfaces may occur along both the C–S and C–O bond activation branches. The ground states of CuS⁺ and CuO⁺ were found to be triplets, whereas CuCO⁺ and CuCS⁺ have singlet ground states. The C–S bond activation is energetically much more favorable than the C–O bond activation. All theoretical results are in line with early experiments.