Animal models for treatment of unresectable liver tumours: a histopathologic and ultra-structural study of cellular toxic changes after electrochemical treatment in rat and dog liver

INTRODUCTION: Electrochemical treatment (EChT) has been taken under serious consideration as being one of several techniques for local treatment of malignancies. The advantage of EChT is the minimal invasive approach and the absence of serious side effects. Macroscopic, histopathological and ultra-structural findings in liver following a four-electrode configuration (dog) and a two-electrode EChT design (dog and rat) were studied. MATERIALS AND METHODS: 30 female Sprague-Dawley rats and four female beagle dogs were studied with EChT using Platinum:Iridium electrodes and the delivered dose was 5, 10 or 90 C (As). After EChT, the animals were euthanized. RESULTS: The distribution of the lesions was predictable, irrespective of dose and electrode configuration. Destruction volumes were found to fit into a logarithmic curve (dose-response). Histopathological examination confirmed a spherical (rat) and cylindrical/ellipsoidal (dog) lesion. The type of necrosis differed due to electrode polarity. Ultra-structural analysis showed distinct features of cell damage depending on the distance from the electrode. Histopathological and ultra-structural examination demonstrated that the liver tissue close to the border of the lesion displayed a normal morphology. CONCLUSIONS: The in vivo dose-planning model is reliable, even in species with larger tissue mass such as dogs. A multi-electrode EChT-design could obtain predictable lesions. The cellular toxicity following EChT is clearly identified and varies with the distance from the electrode and polarity. The distinct border between the lesion and normal tissue suggests that EChT in a clinical setting for the treatment of liver tumours can give a reliable destruction margin.     

Synthesis and photophysics of one mononuclear Mn(III) and one dinuclear Mn(III,III) complex covalently linked to a ruthenium(II) tris(bipyridyl) complex

The preparation of donor (D)-photosensitizer (S) arrays, consisting of a manganese complex as D and a ruthenium tris(bipyridyl) complex as S has been pursued. Two new ruthenium complexes containing coordinating sites for one (2a) and two manganese ions (3a) were prepared in order to provide models for the donor side of photosystem II in green plants. The manganese coordinating site consists of bridging and terminal phenolate as well as terminal pyridyl ligands. The corresponding ruthenium-manganese complexes, a manganese monomer 2b and dimer 3b, were obtained. For the dimer 3b, our data suggest that intramolecular electron transfer from manganese to photogenerated ruthenium(III) is fast, k(ET) > 5 x 10(7) s(-)(1).     

HEAT TRANSFER AND PRESSURE DROP FROM LOUVERED SURFACES IN AUTOMOTIVE HEAT EXCHANGERS

An investigation of heat transfer and pressure drop from some louvered surfaces is presented. The test rig and the measuring as well as the data evaluating procedures are described. The measured data are transferred and presented in a nondimenswnal form. The heal transfer data are provided mainly as Stanton numbers versus Reynolds number, and the pressure drop is given as Darcy friction factors versus Reynolds number. For comparing the performance of the various louvered surfaces, the flow area goodness factors and the so-called volume goodness factors are presented. All the louvered surfaces have been found to be more efficient than the corresponding smooth surface. The standard multilouvered fin surfaces were found to be most efficient, but one of the new surfaces also performed very well.     

Evidence for Electron Transfer between Graphene and Non-Covalently Bound π-Systems

Hybridizing graphene and molecules possess a high potential for developing materials for new applications. However, new methods to characterize such hybrids must be developed. Herein, the wet-chemical non-covalent functionalization of graphene with cationic π-systems is presented and the interaction between graphene and the molecules is characterized in detail. A series of tricationic benzimidazolium salts with various steric demand and counterions was synthesized, characterized and used for the fabrication of graphene hybrids. Subsequently, the doping effects were studied. The molecules are adsorbed onto graphene and studied by Raman spectroscopy, XPS as well as ToF-SIMS. The charged π-systems show a p-doping effect on the underlying graphene. Consequently, the tricationic molecules are reduced through a partial electron transfer process from graphene, a process which is accompanied by the loss of counterions. DFT calculations support this hypothesis and the strong p-doping could be confirmed in fabricated monolayer graphene/hybrid FET devices. The results are the basis to develop sensor applications, which are based on analyte/molecule interactions and effects on doping.     

Multivariate design

In multivariate data analysis such as principal components analysis (PCA) and projections to latent structures (PLS), it is essential that the training set systems (objects) are selected to provide data with substantial information for model parametrization, and to represent properly any future situations where the multilvariate model is used for predictions. In the framework of multivariate projections (PCA, SIMCA and PLS), elementary concepts of statistical design (fractional factorials and composite designs) can be used with the latent variables (PC or PLS scores) as design variables. The plan of action thus becomes: (1) problem formulation (specify aim and model, make a conceptual division of the investigated system into subsystems); (2) collection of multivariate data for each type of subsystems; (3) estimation of the practical dimensionality of the data for each type of subsystems by PC or PLS analysis; (4) use of the PC or PLS scores (t) as design variables in the combination of subsystems to systems in the training set; (5) measurement of responses (Y); (6) analysis of data by PCA or PLS; (7) interpretation of results with possible feedback to steps 1, 2 or 3. The procedures are illustrated by two problems: a structure/activity relationship for a family of peptides, and optimization of an organic synthesis with respect to system variables (solvent, substrate, co-reactant_) and process variables (temperature, reactant concentrations).     

Charge recombination versus charge separation in donor-bridge-acceptor systems

Optimizing the ratio of the rates for charge separation (CS) over charge recombination (CR) is crucial to create long-lived charge-separated states. Mastering the factors that govern the electron transfer (ET) rates is essential when trying to achieve molecular-scale electronics, artificial photosynthesis, and also for the further development of solar cells. Much work has been put into the question of how the donor-acceptor distances and donor-bridge energy gaps affect the electronic coupling, V(DA), and thus the rates of ET. We present here a unique comparison on how these factors differently influence the rates for CS and CR in a porphyrin-based donor-bridge-acceptor model system. Our system contains three series, each of which focuses on a separate charge-transfer rate-determining factor, the donor-acceptor distance, the donor-bridge energy gap, and last, the influence of the electron acceptor on the rate for charge transfer. In these three series both CS and CR are governed by superexchange interactions which make a CR/CS comparative study ideal. We show here that the exponential distance dependence increases slightly for CR compared to that for CS as a result of the increased tunneling barrier height for this reaction, in accordance with the McConnell superexchange model. We also show that the dependence on the tunneling barrier height is different for CS and CR. This difference is highly dependent on the electron acceptor and thus cannot solely be explained by the differences in the frontier orbitals of the electron donor in these porphyrin systems.     

Strategies for monitoring the emerging polar organic contaminants in water with emphasis on integrative passive sampling

Although polar organic contaminants (POCs) such as pharmaceuticals are considered as some of today's most emerging contaminants few of them are regulated or included in on-going monitoring programs. However, the growing concern among the public and researchers together with the new legislature within the European Union, the registration, evaluation and authorisation of chemicals (REACH) system will increase the future need of simple, low cost strategies for monitoring and risk assessment of POCs in aquatic environments. In this article, we overview the advantages and shortcomings of traditional and novel sampling techniques available for monitoring the emerging POCs in water. The benefits and drawbacks of using active and biological sampling were discussed and the principles of organic passive samplers (PS) presented. A detailed overview of type of polar organic PS available, and their classes of target compounds and field of applications were given, and the considerations involved in using them such as environmental effects and quality control were discussed. The usefulness of biological sampling of POCs in water was found to be limited. Polar organic PS was considered to be the only available, but nevertheless, an efficient alternative to active water sampling due to its simplicity, low cost, no need of power supply or maintenance, and the ability of collecting time-integrative samples with one sample collection. However, the polar organic PS need to be further developed before they can be used as standard in water quality monitoring programs.     

Isolation of human serum immunoglobulins with a new salt-promoted adsorbent

In this work a highly acetylated-ethylenediamine-Novarose (HA-EDA-Novarose) gel was synthesized and used as a new agarose-based salt-promoted adsorption chromatography (SPAC) matrix to effectively isolate serum immunoglobulins without the need of denaturing conditions. Samples of human serum in 0.5 M Na2SO4, 10 mM 3-(N-morpholino)-propane-sulfonic acid (MOPS), pH 7.6 were applied to a chromatographic column packed with the SPAC gel. Immunoglobulins (Igs) with affinity for the HA-EDA ligands were specifically adsorbed to the matrix, non-bound serum proteins were readily removed by washing the column with the same feed solution buffer. Bound Igs were effectively and very gently eluted by simply removing the salt from the feed solution buffer. The elution buffer consisted thus of only 10 mM MOPS, at pH 7.6 and no salt. The salt-dependent adsorption capacity of this system was estimated to be 7.3 mg/ml with protein recovery of about 93%. Sodium dodecyl sulfate-polyacrylamide gel (SDS-PAGE) electrophoresis analysis, radial immunodiffusion and enzyme-linked immunosorbent assays showed that immunoglobulins G, M and A (IgG, IgM and IgA) were the main components present in the elution fraction. The new SPAC adsorbent was used to purify Igs from human serum and IgG and IgA from non-pure commercially available Igs preparations in a very gentle single step.     

Competition between superexchange-mediated and sequential electron transfer in a bridged donor-acceptor system

The temperature- and solvent-dependence of photoinduced electron-transfer reactions in a porphyrin-based donor-bridge-acceptor (DBA) system is studied by fluorescence and transient absorption spectroscopy. Two competing processes occur: sequential and direct superexchange-mediated electron transfer. In a weakly polar solvent (2-methyltetrahydrofuran), only direct electron transfer from the excited donor to the appended acceptor is observed, and this process has weak temperature dependence. In polar solvents (butyronitrile and dimethylformamide), both processes are observed and the sequential electron transfer shows strong temperature dependence. In systems where both electron transfer processes are observed, the long-range superexchange-mediated process is more than two times faster than the sequential process, even though the donor-acceptor distance is significantly larger in the former case.