Diffraction techniques for nonlamellar phases of phospholipids

A neutron diffraction method applicable to nonlamellar phases of substrate-supported lipid membranes is described and validated. When prepared on a flat substrate, the resulting nonlamellar phases have layered symmetry which provides some advantages over powder diffraction for detailed structure determination. This approach recently led to the detection of a rhombohedral phase and a distorted hexagonal phase of lipids. Here the determination of intensity and phase information for such phases is demonstrated by application to the hexagonal phase of diphytanoyl phosphatidylcholine (DPhPC). The hexagonal symmetry is used to verify the data reduction procedure for the intensities of the diffraction peaks. Diffraction intensities measured while varying the D2O/H2O ratio in the relative humidity was used to solve the phase problem. The neutron scattering length density distribution of the hexagonal phase was constructed and analyzed to elucidate the packing of the lipid molecules. The structure of DPhPC in the hexagonal phase is of interest in connection with its stalk structure in the rhombohedral phase. We also found that the incorporation of tetradecane into the DPhPC hexagonal phase is limited, similar to the case for dioleoyl phosphatidylethanolamine.     

Determination of lead in water samples by graphite furnace atomic absorption spectrometry after cloud point extraction

Cloud point extraction (CPE) has been used for the pre-concentration of lead, after the formation of a complex with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)-phenol (5-Br-PADAP), and later analysis by graphite furnace atomic absorption spectrometry (GFAAS) using octylphenoxypolyethoxyethanol (TritonX-114) as surfactant. The chemical variables affecting the separation phase were optimized. Separation of the two phases was accomplished by centrifugation for 15 min at 4000 rpm. Under the optimum conditions i.e., pH 8.0, cloud point temperature 40 °C, [5-Br-PADAP] = 2.5 × 10⁻⁵ mol l⁻¹, [Triton X-114] = 0.05%, added methanol volume = 0.15 ml, pre-concentration of only 10 ml sample permitted an enhancement factor of 50-fold. The lower limit of detection (LOD) obtained under the optimal conditions was 0.08 μg l⁻¹. The precision for 10 replicate determinations at 5 μg l⁻¹ Pb was 2.8% relative standard deviation (R.S.D.). The calibration graph using the pre-concentration system for lead was linear with a correlation coefficient of 0.9984 at levels near the detection limits up to at least 30 μg l⁻¹. The method was successfully applied to the determination of lead in water samples.     

Quantitative interrogation of protein co-aggregation using multi-color fluorogenic protein aggregation sensors

Co-aggregation of multiple pathogenic proteins is common in neurodegenerative diseases but deconvolution of such biochemical process is challenging. Herein, we developed a dual-color fluorogenic thermal shift assay to simultaneously report on the aggregation of two different proteins and quantitatively study their thermodynamic stability during co-aggregation. Expansion of spectral coverage was first achieved by developing multi-color fluorogenic protein aggregation sensors. Orthogonal detection was enabled by conjugating sensors of minimal fluorescence crosstalk to two different proteins via sortase-tag technology. Using this assay, we quantified shifts in melting temperatures in a heterozygous model protein system, revealing that the thermodynamic stability of wild-type proteins was significantly compromised by the mutant ones but not vice versa. We also examined how small molecule ligands selectively and differentially interfere with such interplay. Finally, we demonstrated these sensors are suited to visualize how different proteins exert influence on each other upon their co-aggregation in live cells.

A little leak will sink a great ship! We prepared a series of multi-color protein aggregation sensors and developed a dual-color thermal shift assay to simultaneously and quantitatively report on protein co-aggregation of two different proteins.     

Sarcophytolides G–L,New Biscembranoids from the Soft Coral Sarcophyton elegans

Six new biscembranoids, namely, sarcophytolides G–L ( 1 – 6 , resp.), together with six known analogs, were isolated from a marine soft coral Sarcophyton elegans. The structures of the new compounds were established on the basis of 1D‐ and 2D‐NMR (COSY, HSQC, HMBC, and NOESY) spectroscopic analysis together with the aid of MS, CD, and IR data. The unusual isobiscembranoid sarcophytolide G ( 1 ) was found for the first time in the genus Sarcophyton.     

Inducing new secondary metabolites through co-cultivation of the fungus Pestalotiopsis sp. with the bacterium Bacillus subtilis

Two new lactones, pestalotiolactones A (1) and B (2), together with three known compounds (3–5) were isolated from the axenic culture of the endophytic fungus Pestalotiopsis sp., obtained from fruits of Drepanocarpus lunatus (Fabaceae). Co-culture of this fungus with Bacillus subtilis afforded two new sesquiterpenoids pestabacillins A (6) and B (7) as well as eight known compounds (8–15). Their structures were elucidated by extensive analysis of the NMR and MS data as well as by comparison with literature data. All isolated compounds were evaluated for their cytotoxic and antimicrobial activities but proved to be inactive.     

Cloning, Expression, and Characterization of β-mannanase from Bacillus subtilis MAFIC-S11 in Pichia pastoris

The β-mannanase gene (1,029 nucleotide) from Bacillus subtilis MAFIC-S11, encoding a polypeptide of 342 amino acids, was cloned and expressed in Pichia pastoris. To increase its expression, the β-mannanase gene was optimized for codon usage (mannS) and fused downstream to a sequence-encoding modified α-factor signal peptide. The expression level was improved by 2-fold. This recombinant enzyme (mannS) showed its highest activity of 24,600 U/mL after 144-h fermentation. The optimal temperature and pH of mannS were 50 °C and 6.0, respectively, and its specific activity was 3,706 U/mg. The kinetic parameters V _max and K _m were determined as 20,000 U/mg and 8 mg/mL, respectively, representing the highest ever expression level of β-mannanase reported in P. pastoris. In addition, the enzyme exhibited much higher binding activity to chitin, chitosan, Avicel, and mannan. The superior catalytic properties of mannS suggested great potential as an effective additive in animal feed industry.     

Amicoumacins from the marine-derived bacterium Bacillus sp. with the inhibition of NO production

Chemical examination of the fermentation broth of the marine-derived bacterium Bacillus sp. resulted in the isolation of seven new amicoumacin-type isocoumarin derivatives, namely bacillcoumacins A–G (1–7), together with four known analogues. Their structures were elucidated on the basis of extensive spectroscopic analysis, while the absolute configurations of the new compounds were determined by CD, Mosher’s method, and chemical conversion. Compounds 7 and 9 showed inhibitory effects against the NO production induced by lipopolysaccharide (LPS) in mouse macrophage RAW 264.7 cells.     

Antiperovskite Intermetallic Nanoparticles for Enhanced Oxygen Reduction

Antiperovskite Co₃InC_0.7N_0.3 nanomaterials with highly enhanced oxygen reduction reaction (ORR) performance were prepared by tuning nitrogen contents through a metal–organic framework (MOF)‐derived strategy. The nanomaterial surpasses all reported noble‐metal‐free antiperovskites and even most perovskites in terms of onset potential (0.957 V at J=0.1 mA cm^?2) and half‐wave potential (0.854 V). The OER and zinc–air battery performance demonstrate its multifunctional oxygen catalytic activities. DFT calculation was performed and for the first time, a 4 e^? dissociative ORR pathway on (200) facets of antiperovskite was revealed. Free energy studies showed that nitrogen substitution could strengthen the OH desorption as well as hydrogenation that accounts for the enhanced ORR performance. This work expands the scope for material design via tailoring the nitrogen contents for optimal reaction free energy and hence performance of the antiperovskite system.     

Three‐Pronged Attack by Homologous Far‐red/NIR AIEgens to Achieve 1+1+1>3 Synergistic Enhanced Photodynamic Therapy

Photodynamic therapy (PDT) has long been shown to be a powerful therapeutic modality for cancer. However, PDT is undiversified and has become stereotyped in recent years. Exploration of distinctive PDT methods is thus highly in demand but remains a severe challenge. Herein, an unprecedented 1+1+1>3 synergistic strategy is proposed and validated for the first time. Three homologous luminogens with aggregation‐induced emission (AIE) characteristics were rationally designed based on a simple backbone. Through slight structural tuning, these far‐red/near‐infrared AIE luminogens are capable of specifically anchoring to mitochondria, cell membrane, and lysosome, and effectively generating reactive oxygen species (ROS). Notably, biological studies demonstrated combined usage of three AIE photosensitizers gives multiple ROS sources simultaneously derived from several organelles, which gives superior therapeutic effect than that from a single organelle at the same photosensitizers concentration. This strategy is conceptually and operationally simple, providing an innovative approach and renewed awareness of improving therapeutic effect through three‐pronged PDT.     

分布振子复合板的模态阻尼及多点激励下阻尼减振相关性

分布阻尼振子可拓宽结构减振频带,因此可将振子分布于板中以形成复合板（简称“分布振子复合板”）,进而实现较宽的减振频带．对于多点支撑处受到宽频非一致激励（例如在不同激励点处的激励频率、幅值与相位有差异）的分布振子复合板,目前还缺乏有效简便的优化控制指标．在作者之前的研究中,针对含分布振子的梁推导了基于模态应变能的模态阻尼计算理论,讨论了模态阻尼与单点激励下梁的减振效果的相关性,并应用于宽频减振设计优化．本文进一步将模态阻尼计算理论推广到分布振子复合板,并将研究从梁的单点激励扩展到板的多点非一致激励下的阻尼减振相关性．首先,在利用模态应变能法推导得到分布振子复合板的模态阻尼计算公式后,从理论上讨论了不同边界条件与模态阶次对计算结果的影响,以及计算理论的适用性．而后,进一步通过有限元参数分析了边界条件、频率比、模态阶次与质量比的影响．最后,通过算例分析了无振子板或分布振子复合板在四个激励点具有多种幅值与相位组合情况下的稳态响应．结果表明,推导的模态阻尼计算公式可正确预测不同边界条件下的模态阻尼,且理论预测的模态阻尼与基板的稳态平均加速度减小率、稳态峰值应变能减小率均有较高的相关性．