Identification of decomposition reactions for HMDSO organosilicon using quantum chemical calculations

Hexamethyldisiloxane [HMDSO, (CH₃)₃-SiOSi-(CH₃)₃] is an important precursor for SiO₂ formation during flame-based silica material synthesis. As a result, HMDSO reactions in flame have been widely investigated experimentally, and many results have indicated that HMDSO decomposition reactions occur very early in this process. In this paper, quantum chemical calculations are performed to identify the initial decomposition of HMDSO and its subsequent reactions using the density functional theory at the level of B3LYP/6-311+G (d, p). Four reaction pathways—(a) Si O bond dissociation of HMDSO, (b) Si C bond dissociation of HMDSO, (c) dissociation and recombination of Si O and Si C bonds, and (d) elimination of a methane molecule from HMDSO—have been examined and identified. From the results, it is found that the barrier of 84.38 kcal/mol and Si O bond dissociation energy of 21.55 kcal/mol are required for the initial decomposition reaction of HMDSO in the first pathway, but the highest free energy barrier (100.69 kcal/mol) is found in the third reaction pathway. By comparing the free energy barriers and reaction rate constants, it is concluded that the most possible initial decomposition reaction of HMDSO is to eliminate the CH₃ radical by Si C bond dissociation.     

电感耦合等离子体质谱(ICP-MS)法测定农产品地土壤中铅、镉、铬消解方法的改进

采用赶酸电热板消解农产品地土壤中的重金属,电感耦合等离子体质谱(ICP-MS)法同时测定土壤中的铅、镉、铬。研究了酸体系及酸用量、赶酸电热板的升温程序,确定了最佳消解条件。通过统计50个批次土壤样品中加入的质控样,做出质控图,结果表明:各元素测定值均落在中心附近、上下警告线之内,批次内平行样品各元素相对标准偏差均小于5%。方法克服了传统的电热板消解法的缺点,弥补了高压罐消解法和微波消解法的不足,方法快速、准确,适合于大批量样品的分析。     

流动注射化学发光法测定维生素B2

基于维生素B2还原铬(Ⅵ)产生的铬(Ⅲ)催化Luminol-H2O2发光体系的研究,结合流动注射技术,建立了一种灵敏度高、线性范围宽的流动注射化学发光测定维生素B2的新方法.该方法在1.0×10-10～1.0×10-5 mol*L-1之间分段回归,呈良好的线性关系,各段分别测定6个溶液,检测限达到3.0×10-11 mol*L-1.对6.0×10-9 mol*L-1的维生素B2平行测定9次,相对标准偏差为1.8%.平均回收率为101.3%.方法准确可靠,用于维生素B2片剂的测定,结果令人满意.     

KDP晶体折射率不均匀性对三倍频转换效率的影响

 采用正交偏振干涉测量法获得了典型的快速(RG)和传统(CG)生长的KDP晶体折射率空间分布，数值模拟了倍频晶体固定失谐角分别为0和220 mrad时晶体折射率不均匀性对高功率三倍频光转换效率的影响。结果表明：快速生长晶体的折射率不均匀性的均方根约为传统生长晶体的6倍；三倍频转换效率在低功率密度下对折射率不均匀性不敏感，在高功率密度下尤其是转换效率较高时很敏感；当混频过程中的二倍频光不过剩时，在晶体折射率变化对三倍频效率的影响方面，倍频晶体比混频晶体严重；目前国产的传统生长晶体可以满足高功率三倍频实验要求。     

全自动流动注射-分光光度法测定土壤中氨氮

传统的氯化钾溶液提取分光光度法测定土壤中氨氮时,需要加入硝普钠-苯酚显色剂混匀后一定时间再加入二氯异氰尿酸钠显色剂,这个过程中人为接触苯酚等有机试剂的时间较长,对人体和环境有一定的危害;且传统的比色法显色时间至少需要5h,显色时间较长,分析效率较低.应用全自动流动注射-分光光度法测定土壤中氨氮,考察了提取试剂的厂家、浓...     

王玉功,倪能 ,杨发旺

采用电感耦合等离子体发射光谱法(ICP-AES)测定地表水和地下水中的全S、P、B来近似代替水中的SO42-、PO43-、H3BO3。结果表明,ICP-AES可同时测定地表水和地下水的SO42-、PO43-、H3BO3,方法检出限分别为0.0265mg/L、0.0320mg/L、0.0192mg/L。方法的精密度(RSD,n=6)为0.53﹪～6.09﹪,加标回收率为91.9﹪～102.2﹪,经与单个项目分别测定的方法比对实验,测定值无明显系统偏差。方法快速、准确,经国家标准物质验证,结果与标准值相符。     

乙酸铵离心交换法和乙酸钙离心交换法测定土壤阳离子交换量

土壤阳离子交换量(CEC)的测定在农业中有重要的意义,对农业行业标准NY/T295—1995和NY/T1121.5—2006中的离心交换法测定土壤中CEC值的方法进行了优化,讨论了不同pH值的土壤样品对两种方法的选择依据,分析了CEC值测定重现性较差的原因。结果表明,pH值的范围是方法选择的重要依据,pH7.0的样品适合用乙酸铵离心交换法,pH≥7.0的样品则适用乙酸钙离心交换法。优化后方法的准确度和精密度有了较大的改善,实验中对各步骤的优化缩短了约40%的操作时间,减少工作量,适合于批量样品的准确测定。     

纳氏试剂测定水中氨氮影响因素的探讨

对国家生活饮用水标准检验方法"GB/T5750—2006"中涉及到的水中氨氮的检测条件进行了探讨,讨论了样品的采集与保存,影响显色、空白值的各项因素,并提出相应的解决办法。对国家标准物质以及实际样品的验证表明,方法的相对误差为0.03%~1.5%,相对标准偏差RSD为0.55%~5.3%,准确度也能满足分析要求,对国家标准方法进行了补充与细化,在实际工作中有参考价值。     

封闭溶样-电感耦合等离子体质谱法测定地质样品中痕量金

建立了聚乙烯塑料瓶封闭水浴加热,王水溶解,以铼作内标,电感耦合等离子体质谱法测定地质样品中痕量金。结果表明,样品中的金可分解完全,节约了成本、减少了环境污染。方法经国家一级标准物质验证,结果与标准值相符。对实际样品测定的方法相对标准偏差(RSD,n=9)为4.1%～6.7%。方法检出限为0.12ng/g,方法简便快速,适用于地质样品的批量分析。     

Shear band formation in thermo-viscoplastic solids under plane strain compression

The plane strain compression of a rectangular block is numerically investigated for the study of dynamic shear band development in thermo-elasto-viscoplastic materials from an internal inhomogeneity. As expected, it plays an important role in triggering the onset of shear, localization as well as thermal softening. And the competition between the strain, strain-rate hardening and thermal softening exists throughout the process. It is found that shear band develops at a 45-degree angle to the compression axis. In the light of given patterns of deformation and temperature, shear band evolution accelerated by thermal softening is retarded by the inertial effects. Interestingly, a similar temperature band is also formed along the trajectory of the localized deformation band. The calculations also show the energy evolution during the coupled thermo-mechanical process of shear band propagation. Finally, the mesh effect is discussed in terms of the numerical results from two different meshes. The project is supported by the National Natural Sciences Foundation of China.