A new lignan glycoside and other constituents from Cephalaria ambrosioides

A new lignan glycoside, 1,5-dihydroxy-2-(4"-beta-D-glucopyranosyloxy-3"-methoxyphenyl)-6-(4'-hydroxy-3'-methoxyphenyl)-3,7-dioxabicyclo[3.3.0]octane, named ambrosidine ([structure: see text]), along with seven known compounds (four iridoids and three hydroxycinnamic esters) were isolated from the roots of Cephalaria ambrosioides. The structures of these compounds were determined by use of NMR and MS techniques and by chemical transformations. The cytotoxic activity of the novel compound [structure: see text] was evaluated against five human solid tumour cell lines.     

Expanding the Scope of the Cleavable N-(Methoxy)oxazolidine Linker for the Synthesis of Oligonucleotide Conjugates

Oligonucleotides modified by a 2′-deoxy-2′-(N-methoxyamino) ribonucleotide react readily with aldehydes in slightly acidic conditions to yield the corresponding N-(methoxy)oxazolidine-linked oligonucleotide-conjugates. The reaction is reversible and dynamic in slightly acidic conditions, while the products are virtually stable above pH 7, where the reaction is in a ‘‘switched off-state’’. Small molecular examinations have demonstrated that aldehyde constituents affect the cleavage rate of the N-(methoxy)oxazolidine-linkage. This can be utilized to adjust the stability of this pH-responsive cleavable linker for drug delivery applications. In the present study, Fmoc-β-Ala-H was immobilized to a serine-modified ChemMatrix resin and used for the automated assembly of two peptidealdehydes and one aldehyde-modified peptide nucleic acid (PNA). In addition, a triantennary N-acetyl-d-galactosamine-cluster with a β-Ala-H unit has been synthesized. These aldehydes were conjugated via N-(methoxy)oxazolidine-linkage to therapeutically relevant oligonucleotide phosphorothioates and one DNA-aptamer in 19–47% isolated yields. The cleavage rates of the conjugates were studied in slightly acidic conditions. In addition to the diverse set of conjugates synthesized, these experiments and a comparison to published data demonstrate that the simple conversion of Gly-H to β-Ala-H residue resulted in a faster cleavage of the N-(methoxy)oxazolidine-linker at pH 5, being comparable (T_0.5 ca 7 h) to hydrazone-based structures.     

Monitoring bisphenol A and estrogenic chemicals in thermal paper with yeast-based bioreporter assay

Bioluminescent Saccharomyces cerevisiae yeast-based bioreporters were used to monitor bisphenol A and other estrogenic chemicals in thermal paper samples collected mainly from Finland on two occasions in 2010/2011, and 2013. The bisphenol A-targeted (BPA-R) and the human oestrogen receptor (hERα) bioreporters were applied to analyse both non-treated and extracted paper samples. Bisphenol A was readily bioavailable to the yeast bioreporters on the non-treated paper samples without any pre-treatment. Detected concentrations ranged from a detection limit of 9–142 μg/g to over 20 mg/g of bisphenol A equivalents in the thermal papers. Low bisphenol A like activities were detected in many samples, and were considered to be caused by residual bisphenol A or other types of bisphenols, such as bisphenol S. Most of the thermal paper samples were toxic to the yeast bioreporters. The toxicity did not, however, depend on the bisphenol A concentration of the samples. The yeast bioreporters were demonstrated to be a robust and cost-efficient method to monitor thermal paper samples for their bisphenol A content and estrogenicity. Thermal paper was considered as a potential BPA source for both human exposure and environmental emission.     

Mutant-Selective Allosteric EGFR Degraders are Effective Against a Broad Range of Drug-Resistant Mutations

Targeting epidermal growth factor receptor (EGFR) through an allosteric mechanism provides a potential therapeutic strategy to overcome drug-resistant EGFR mutations that emerge within the ATP binding site. Here, we develop an allosteric EGFR degrader, DDC-01-163, which can selectively inhibit the proliferation of L858R/T790M (L/T) mutant Ba/F3 cells while leaving wildtype EGFR Ba/F3 cells unaffected. DDC-01-163 is also effective against osimertinib-resistant cells with L/T/C797S and L/T/L718Q EGFR mutations. When combined with an ATP-site EGFR inhibitor, osimertinib, the anti-proliferative activity of DDC-01-163 against L858R/T790M EGFR-Ba/F3 cells is enhanced. Collectively, DDC-01-163 is a promising allosteric EGFR degrader with selective activity against various clinically relevant EGFR mutants as a single agent and when combined with an ATP-site inhibitor. Our data suggests that targeted protein degradation is a promising drug development approach for mutant EGFR.     

New nucleoside analogs from 2-amino-9-(beta-D-ribofuranosyl)purine

Four novel derivatives of 2-amino-9-(beta-D-ribofuranosyl)purine (1) were synthesised and fully characterised. When 1 was reacted with chloroacetaldehyde (a), 2-chloropropanal (b), bromomalonaldehyde (c) and a mixture of chloroacetaldehyde + malonaldehyde (d), 3-(beta-D-ribofuranosyl)-imidazo-[1,2a]purine (2), 3-(beta-D-ribofuranosyl)-5-methylimidazo-[1,2a]purine (3), 3-(beta-D-ribofuranosyl)-5-formylimidazo-[1,2a]purine (4) and 9-(beta-D-ribofuranosyl)-2-(3,5-diformyl-4-methyl-1,4-dihydro-1-pyridyl)purine (5) were formed, respectively. The products were isolated, purified by chromatography and characterised by MS, complete NMR assignment as well as fluorescence and UV spectroscopy. The yields of these reactions were moderate (14-20%). The fluorescence properties differed from those of the starting compound and the quantum yields were considerably lower.     

Pentaerythrityltetramine scaffolds for solid-phase combinatorial chemistry

Straightforward synthesis for two pentaerythrityltetramine precursors, 2,2-bis(azidomethyl)propane-1,3-diamine (1) and 2-[N-(allyloxycarbonyl)aminomethyl]-2-azidomethylpropane-1,3-diamine (2), has been described. Both propane-1,3-diamines have been attached by reductive amination to a solid-supported backbone amide linker derived from 4-(4-formyl-3,5-dimethoxyphenoxy)butyric acid. The presence of the two methoxy substituents on the linker is essential to avoid cross-linking between two linkers. The remaining free primary amino group of the propane-1,3-diamine moiety may then be selectively acylated with an appropriately protected amino acid using conventional N,N-dicyclohexylcarbodiimide/1-hydroxybenzotriazole (DCC/HOBt) activation without any interference by the secondary amino function. The latter group may be subsequently acylated by an anhydride method. Sequential reduction of the azido group and removal of the allyloxycarbonyl protection from 2 allow further coupling of two different amino acids, and hence, this handle may be utilized in construction of branched structures containing four different amino acids or peptides. Solid-supported 1 may, in turn, be used for the synthesis of similar constructs containing two identical branches. It is worth noting that no acid-labile protecting groups are required in this approach, and hence, this dimension may be saved for the cleavage of the linker. The applicability of the scaffolds to library synthesis has been demonstrated by preparation of 11 pentaerythrityl-branched tetra- and octapeptides.     

13C isotope effects on 1H chemical shifts: NMR spectral analysis of 13C‐labelled D‐glucose and some 13C‐labelled amino acids

The one‐ and two‐bond ¹³C isotope shifts, typically ?1.5 to ?2.5 ppb and ?0.7 ppb respectively, in non‐cyclic aliphatic systems and up to ?4.4 ppb and ?1.0 ppb in glucose cause effects that need to be taken into account in the adaptive NMR spectral library‐based quantification of the isotopomer mixtures. In this work, NMR spectral analyses of some ¹³C‐labelled amino acids, D ‐glucose and other small compounds were performed in order to obtain rules for prediction of the ¹³C isotope effects on ¹H chemical shifts. It is proposed that using the additivity rules, the isotope effects can be predicted with a sufficient accuracy for amino acid isotopomer applications. For glucose the effects were found strongly non‐additive. The complete spectral analysis of fully ¹³C‐labelled D ‐glucose made it also possible to assign the exocyclic proton signals of the glucose. Copyright © 2009 John Wiley & Sons, Ltd.     

A compact olfactometer for IMS measurements and testing human perception

Production of easily controllable and measurable odor stimuli is needed when studying human olfaction, olfaction-related physiology and psychological reactions to odors. Controlled odor producing instruments are called olfactometers. For testing and calibrating new olfactometers or sensor arrays, a reliable input signal has to be produced to verify their accurate functionality. A common input signal in various olfactometers has been the use of volatile organic compounds (VOCs) in gaseous form. We present a compact olfactometer able to produce controlled continuous odor stimuli from three individual channels. For measuring the output gas flow, we used a ChemPro 100i (Environics, Finland) device that is based on aspiration ion mobility spectrometry (aIMS). IMS is a robust and sensitive method for measuring VOCs and is used especially in detecting toxic industrial chemicals and chemical warfare agents, but the technology is also suitable for other olfactory-related applications. The olfactometer was used to produce synthetic jasmine scent using three main odor components from jasmine oil and all the components were diluted using propylene glycol. The dilutions were supplied to the system using programmable syringe pumps, which guided the dilutions to individual evaporation units. We conducted experiments to verify the functionality of our olfactometer. Analysis of the ChemPro100i data showed that olfactometer can use different odor components to produce continuous, stable output flows with controlled concentrations.     

A modular approach to catalyst hydrophobicity for an asymmetric aldol reaction in a biphasic aqueous environment

Catalyst 5, an ion pair consisting of a hydrophilic cation and a lipophilic anion, fulfils the solubility requirements needed to couple efficiency (enantioselectivities and anti-diastereoselectivities up to > or = 99%) and catalyst recyclability in asymmetric aldol reactions under aqueous biphasic conditions.     

Propagation of spatially partially coherent emission from a vertical-cavity surface-emitting laser

Recently we observed a strong reduction of spatial coherence of the emission of large-aperture vertical-cavity surface-emitting lasers when they are driven by microsecond electrical pulses [Opt. Express 13, 9337 (2005)]. We study the influence of this partial spatial coherence on the propagation characteristics. The spatial decoherence manifests itself in the formation of a Gaussian far-field intensity distribution. We measure the transverse pulse profile from near to far field and see that the shape-invariant far-field regime starts after 140 microm in the pulsed regime as opposed to several centimeters in continuous wave operation. This value matches quantitatively calculations made with a novel partially coherent propagation model without any free fitting parameters.