Some Novel Dinuclear phenylboronates of biologically potent β‐enaminoesters: Synthesis,Spectroscopic characterization,antimicrobial activity and their antiandrogenic effect

Organoboron derivatives of biologically potent β‐enamino esters of the type [Where R = CH₃(1a), C₂H₅ (1b), C₃H₇(1c) and C (CH₃)₃ (1d)] have been prepared by the reactions of β‐enamino esters and Phenyl boronic acid [PhB (OH)₂] in 1:2 molar ratio in refluxing tetrahydrofuran (THF). All these derivatives have been characterized by physico‐chemical properties, elemental analyses and molecular weight measurements. The structures of these compounds have been proposed on the basis of IR, ¹H, ¹³C, ¹¹B NMR spectral data and GC‐mass spectrometry. Phenyl boronic acid, β‐enamino esters and their respective phenylboronates derivatives have been screened for the antibmicrobial activities against pathogenic bacteria (B. subtilis and E. coli) and fungi (A. niger and P. peniculosum) to access their growth inhibiting potential. In addition to this, antiandrogenic effect of Ligand, L^aH₂ and its boron derivative (1a) has also been tested in male albino rats.     

Kinetics and mechanism of the oxidation of some α‐hydroxy acids by 2,2′‐bipyridinium chlorochromate

The oxidation of glycolic, lactic, malic, and a few substituted mandelic acids by 2,2′‐bipyridinium chlorochromate (BPCC) in dimethylsulphoxide leads to the formation of corresponding oxoacids. The reaction is first order each in BPCC and the hydroxy acids. The reaction is catalyzed by the hydrogen ions. The hydrogen ion dependence has the form: k_obs = a + b [H⁺]. The oxidation of α‐deuteriomandelic acid exhibited a substantial primary kinetic isotope effect (k_H/k_d = 5.29 at 303 K). Oxidation of p‐methylmandelic acid was studied in 19 different organic solvents. The solvent effect has been analyzed by using Kamlet's and Swain's multiparametric equations. A mechanism involving a hydride ion transfer via a chromate ester is proposed. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 248–254, 2002     

Immobilization and Kinetics of Catalase on Calcium Carbonate Nanoparticles Attached Epoxy Support

A novel hybrid epoxy/nano CaCO₃ composite matrix for catalase immobilization was prepared by polymerizing epoxy resin in the presence of CaCO₃ nanoparticles. The hybrid support was characterized using scanning electron microscopy and Fourier transform infrared spectroscopy. Catalase was successfully immobilized onto epoxy/nano CaCO₃ support with a conjugation yield of 0.67?±?0.01 mg/cm² and 92.63?±?0.80 % retention of activity. Optimum pH and optimum temperature of free and immobilized catalases were found to be 7.0 and 35 °C. The value of K _m for H₂O₂ was higher for immobilized enzyme (31.42 mM) than native enzyme (27.73 mM). A decrease in V _max value from 1,500 to 421.10 μmol (min mg protein)^?1 was observed after immobilization. Thermal and storage stabilities of catalase improved immensely after immobilization. Immobilized enzyme retained three times than the activity of free enzyme when kept at 75 °C for 1 h and the half-life of enzyme increased five times when stored in phosphate buffer (0.01 M, pH 7.0) at 5 °C. The enzyme could be reused 30 times without any significant loss of its initial activity. Desorption of catalase from the hybrid support was minimum at pH 7.0.     

Investigation of optimum pulse shape for 112 Gbps DP-DQPSK in DWDM transmission

This paper reports the simulative analyses to investigate the impact of different pulse shapes on DP-DQPSK modulation for high-spectral efficient DWDM transmission at 112 Gbps per channel. In the simulation model we have considered three different pulse shapes viz. NRZ, 50% duty cycle RZ (RZ50) and 67% duty cycle RZ (RZ67) in symbol-aligned and symbol-interleaved format. The analysis has been carried out for various linear and nonlinear system impairments where the pulse is subjected to degradation under the influence of amplified spontaneous emission (ASE) noise, group velocity dispersion (GVD), cross-phase modulation (XPM) and polarization mode dispersion (PMD) and thus, limiting the system performance. Results show that the RZ50 pulse shape for DP-DQPSK with symbol interleaving shows the maximum tolerance for the various system degradations in long haul DWDM transmission. Even the system based on the NRZ pulse shape can gain significant improvement from the symbol-interleaving.     

518—π-acid effect on electrode behaviour of ternary complexes in solution: Complex formation between copper(II)-1,10-phenanthroline complex and ligands containing oxygen and/or nitrogen donor atoms as secondary ligands. part II

The study of mixed-ligand complexes [Cu_x(phen)_yL_z] (where phen stands for 1,10-phenanthroline and L for aliphatic acids, aromatic acids, amino acids and phenols in the ratio of 1 : 1 : 1 and 1 : 2 : 1) has been made at three different temperatures, namely 30, 35 and 40°C. It is observed that all the complexes follow a partictiar reaction mechanism with temperature, and the half-wave potential shifts towards the more positive side with rise of temperature, indicating easier reduction. Besides the formal rate constant, the activation energy of diffusion, E_D, has been calculated for each system. The effect of activation energy and the energy of rearrangement of electronic configuration of the depolarizer has been discussed against availability of the redox orbital for the electroreduction process.     

Purification and Analytical Application of <Emphasis Type="Italic">Vigna mungo</Emphasis> Chitinase for Determination of Total Fungal Load of Stored Cereals

Chitinases are glycosyl hydrolases that catalyze the hydrolysis of β-(1,4)-glycosidic bonds in chitin, the major structural polysaccharide presented in the cuticle and gut peritrophic matrix of insects. Two aspartate residues (D143, D145) and one tryptophan (W146) in the Lymantria dispar chitinase are highly conserved residues observed within the second conserved motif of the family 18 chitinase catalytic region. In this study, a chitinase cDNA, LdCht5, was cloned from L. dispar, and the roles of the three residues were investigated using site-directed mutagenesis and substituting them with three other amino acids. Seven mutant proteins, D143E, D145E, W146G, D143E/D145E, D143E/W146G, D145E/W146G, and D143E/D145E/W146G, as well as the wild-type enzyme, were produced using the baculovirus-insect cell line expression system. The enzymatic and kinetic properties of these mutant enzymes were measured using the oligosaccharide substrate MU-(GlcNAc)₃. Among the seven mutants, the D145E, D143E/D145E, and D145E/W146G mutations kept some extant catalytic activity toward MU-(GlcNAc)₃, while the D143E, W146G, D143E/W146G, and D143E/D145E/W146G mutant enzymes were inactivated. Compared with the mutant enzymes, the wild-type enzyme had higher values of k _cat and k _cat / K _m . A study of the multiple point mutations in the second conserved catalytic region would help to elucidate the role of the critical residues and their relationships.     

Dielectric behaviour and hydrogen bond molecular interaction study of formamide-dipolar solvents binary mixtures

The dielectric constant of binary mixtures of formamide with some common dipolar aprotic and protic solvents has been investigated at sixteen molar concentrations over the entire mixing range at 30 °C. The solvents used for binary mixtures with formamide are water, dimethylsulphoxide, N,N-dimethylformamide, acetone, 1,4-dioxane, mono-, di- and trihydric alcohols, and homologous series of 2-alkoxyethanol, 2-(2-alkoxyethoxy)ethanol, and ethylene glycol oligomers. The concentration dependent plots of excess dielectric constant and Kirkwood correlation factor were used to explore the complexes formed between unlike molecules, the molar ratio of a stable adduct, dipolar ordering, hydrogen-bond molecular connectivities, and their strength in the binary mixtures. Results confirmed that the complexation strength of dipolar aprotic solvents with formamide strongly depends on the value of solvent dielectric constant. The dependence of the hydrogen-bond complexation on number of hydroxyl groups and molecular size of the homologous series of the solvents is recognized from the comparative excess dielectric constant values of the mixed solvents.     

Heterogeneous reactions of epoxides in acidic media

Epoxides have recently been identified as important intermediates in the gas phase oxidation of hydrocarbons, and their hydrolysis products have been observed in ambient aerosols. To evaluate the role of epoxides in the formation of secondary organic aerosols (SOA), the kinetics and mechanism of heterogeneous reactions of two model epoxides, isoprene oxide and α-pinene oxide, with sulfuric acid, ammonium bisulfate, and ammonium sulfate have been investigated using complementary experimental techniques. Kinetic experiments using a fast flow reactor coupled to an ion drift-chemical ionization mass spectrometer (ID-CIMS) show a fast irreversible loss of the epoxides with the uptake coefficients (γ) of (1.7 ± 0.1) × 10(-2) and (4.6 ± 0.3) × 10(-2) for isoprene oxide and α-pinene oxide, respectively, for 90 wt % H(2)SO(4) and at room temperature. Experiments using attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) reveal that diols are the major products in ammonium bisulfate and dilute H(2)SO(4) (<25 wt %) solutions for both epoxides. In concentrated H(2)SO(4) (>65 wt %), acetals are formed from isoprene oxide, whereas organosulfates are produced from α-pinene oxide. The reaction of the epoxides with ammonium sulfate is slow and no products are observed. The epoxide reactions using bulk samples and Nuclear Magnetic Resonance (NMR) spectroscopy reveal the presence of diols as the major products for isoprene oxide, accompanied by aldehyde formation. For α-pinene oxide, organosulfate formation is observed with a yield increasing with the acidity. Large yields of organosulfates in all NMR experiments with α-pinene oxide are attributed to the kinetic isotope effect (KIE) from the use of deuterated sulfuric acid and water. Our results suggest that acid-catalyzed hydrolysis of epoxides results in the formation of a wide range of products, and some of the products have low volatility and contribute to SOA growth under ambient conditions prevailing in the urban atmosphere.     

Nafion-coated mercury thin film electrodes for batch-injection analysis with anodic stripping voltammetry

Batch-injection analysis exhibits the advantages of rapid and simple electroanalysis of microlitre samples. Nafion-coated mercury thin film electrodes have been evaluated for use in batch-injection analysis with anodic stripping voltammetry (BIA-ASV). The advantages of Nafion-coated electrodes in reducing electrode contamination by components of complex matrices are combined with the analysis of small microlitre sample volumes. The measurement of traces of lead and cadmium is used to illustrate the approach. An optimised procedure for formation of Nafion-coated mercury thin film electrodes is evolved. The relative sensitivity for BIA-ASV at electrodes with and without Nafion coatings is 0.9 and 0.8 for cadmium and lead respectively; detection limits are 2 x 10(-9) M and 4 x 10(-9) M. Studies were done concerning the influence of surfactants and their effect was found to be much less with the Nafion film coating. Applications to real environmental samples are demonstrated.