Protective effects of cyanidin-3-O-beta-glucopyranoside against UVA-induced oxidative stress in human keratinocytes

Ultraviolet-A (UVA) radiation causes significant oxidative stress because it leads to the generation of reactive oxygen species (ROS), leading to extensive cellular damage and eventual cell death either by apoptosis or necrosis. We evaluated the protective effects of cyanidin-3-O-beta-glucopyranoside (C-3-G) against UVA-induced apoptosis and DNA fragmentation in a human keratinocyte cell line (HaCaT). Treatment of HaCaT cells with C-3-G before UVA irradiation inhibited the formation of apoptotic cells (61%) and DNA fragmentation (54%). We also investigated antioxidant properties of C-3-G in HaCaT cells against ROS formation at apoptotic doses of UVA; C-3-G inhibited hydrogen peroxide (H2O2) release (an indicator of cellular ROS formation) after UVA irradiation. Further confirmation of the potential of C-3-G to counteract UVA-induced ROS formation comes from our demonstration of its ability to enhance the resistance of HaCaT cells to the apoptotic effects of both H2O2 and the superoxide anion (O2*-), two ROS involved in UVA-oxidative stress. Furthermore, in terms of Trolox Equivalent Antioxidant Activity, C-3-G treatment led to a greater increase in antioxidant activity in the membrane-enriched fraction than in the cytosol (55% vs 19%). The protective effects against UVA-induced ROS formation can be attributed to the higher membrane levels of C-3-G incorporation. These encouraging in vitro results support further research into C-3-G (and other anthocyanins) as novel agents for skin photoprotection.     

Analysis of basic hair dyes by HPLC with on-line post-column photochemical derivatisation

Summary A reversed phase liquid chromatographic method is proposed for the analysis of basic hair dyes (raw materials and colourant formulations). The performance of the method was enhanced by introducing post-column on-line photochemical derivatisation in combination with a Diode Array Detector. On-line photoderivatisation provided an effective way of selectively transforming the analytes to compounds with different spectral properties. For each analyte two characteristic UV-Visible spectra (photoreactor on and off) were obtained with the same mobile phase and this information in combination with the chromatographic data (k' at pH 3.0 and 4.5) enabled the unambiguous identification of both commonly used, approved, and banned basic hair dyes. Additionally, this approach was found useful to improve the method sensitivity, allowing the determination of analytes present in low concentration (0.03%) in complex commercial formulations.This work constitutes part of the thesis for the Dottorato di Ricerche of Roberto Gotti.     

Heavy metal biosorption by bacterial cells

Microbial biomass provides available ligand groups on which metal ions bind by different mechanisms. Biosorption of these elements from aqueous solutions represents a remediation technology suitable for the treatment of metal-contaminated effluents. The purpose of the present investigation was the assessment of the capability of Brevibacterium sp. cells to remove bivalent ions, when present alone or in pairs, from aqueous solutions, using immobilized polyacrylamide cells of the microorganism in a flow-through system. The biosorption capacity of Brevibacterium cells was studied for lead, cadmium and copper. The metal cell binding capacity followed the order Cu > Pb > Cd, based on estimated q_max. These values, expressed as mmol metal/g dry weight cells, were 0.54 for Cu, 0.36 for Pb and 0.14 for Cd. Polyacrylamide-gel immobilized cells were effective in Pb, Cu and Cd removal. Lead removal was not affected by the presence of Cd and Cu; lead instead inhibited Cd and Cu removal. The desorption of the metal, by fluxing a chelating solution, restored the metal binding capacity of the cells, thus affording the multiple use of the same biomass in the remediation treatment. Received: 31 July 1997 / Revised: 22 December 1997 / Accepted: 30 December 1997     

Monolithic micro-immobilized-enzyme reactor with human recombinant acetylcholinesterase for on-line inhibition studies

The development and characterization of a human recombinant acetylcholinesterase (hrAChE) micro-immobilized-enzyme reactor (IMER), prepared by using an in situ immobilization procedure is reported. hrAChE was covalently immobilized on an ethylenediamine (EDA) monolithic convective interaction media (CIM) disk (12 mm x 3 mm i.d.), previously derivatized with glutaraldehyde. The optimal conditions for the immobilization were: 12 microg of enzyme dissolved in 800 microl of phosphate buffer (50 mM, pH 6.0). The mixture was gently agitated overnight at 4 degrees C. The resulting Schiff bases were reduced by cyanoborohydride and the remaining aldehydic groups were condensed with monoethanolamine. Under these conditions, 0.22 U of hrAChE were immobilized with retention of 3.0% of the initial enzymatic activity. The activity of the immobilized hrAChE was stable for over 60 days. The activity and kinetic parameters of the hrAChE micro-IMER were investigated by inserting the micro-IMER in a HPLC system and it was demonstrated that the enzyme retained its activity. The micro-IMER was characterized in terms of units of immobilized enzyme and best conditions for immobilization yield. IMERs were compared for their relative enzyme stability, immobilized units, yield and aspecific matrix interactions. The effect of AChE inhibitors was evaluated by the simultaneous injection of each inhibitor with the substrate. The relative IC50 values were found in agreement with those derived by the conventional kinetic spectrophotometric method. In comparison with previously developed AChE-based IMERs, AChE monolithic micro-IMER showed advantages in terms of reduction of analysis time (2 min), lower aspecific matrix interactions and lower backpressure. Included in a HPLC system, it can be used for the rapid screening of new compounds' inhibitory potency. The advantages over the conventional methods are the increased enzyme stability and system automation which allows a large number of compounds to be analyzed in continuous.     

Liquid chromatography-tandem mass spectrometry for the identification of impurities in d-allethrin samples

A previous GC/MS study highlighting the impurity profile of the synthetic pesticide d-allethrin is extended here to validate and confirm the impurities identity through the development of soft ionisation HPLC-MS methods. To accomplish this, we developed a reverse phase LC-MS analysis in gradient elution with two distinct soft ionisation techniques, the atmospheric pressure ionisation with electrospray source (API-ESI) and the chemical ionisation (APCI). A single quadrupole and an ion trap, which allowed the simultaneous determination of the molecular masses and structural information of the impurities by acquisition of collisionally induced (CID) product ions spectrum and in-source fragmentation, were employed as analysers. Single quadrupole and ion trap analysers resulted perfectly matching in the d-allethrin impurity fragmentation patterns. All the main impurities over 0.1% identified by GC/MS were confirmed. Results indicate that the proposed HPLC/MS method was found appropriate to confirm the presence of impurities such as chrysolactone, chloro allethrin derivatives, allethrolone and chrysanthemic acid, excluding their formation under GC/MS strong ionisation condition.     

Study of donepezil binding to serum albumin by capillary electrophoresis and circular dichroism

The interaction between human serum albumin (HSA) and the acetylcholinesterase inhibitor donepezil, has been studied by means of capillary electrophoresis frontal analysis (CE/FA) and circular dichroism. CE/FA enabled rapid and direct estimation of the quantity of free donepezil present at equilibrium with a physiological level of serum albumin (600 mol L^–1). Application of Scatchard analysis enabled estimation of the binding parameters of HSA towards donepezil, such as association constant and number of binding sites on one protein molecule. Furthermore, due to enantioseparation ability shown by HSA on donepezil in CE mode, displacement experiments were carried out using ketoprofen and warfarin as coadditives to the HSA based running buffer. The addition of these compounds reduced the enantioresolution of donepezil by HSA only when used at high concentration. These data were confirmed and corroborated by circular dichroism (CD) experiments. Using CD, bilirubin was also applied as a ligand specific to site III of HSA. The observed behaviour suggested that donepezil could be considered a ligand with independent binding to sites I and II; although site III is not the highest affinity site, indirect interaction (i.e. cooperative binding) can be assumed.     

Nitrite increases the enantioselectivity of sulfoxidation catalyzed by myoglobin derivatives in the presence of hydrogen peroxide

The effect of nitrite in the sulfoxidation of organic sulfides catalyzed by myoglobin (Mb) in the presence of hydrogen peroxide has been investigated. A general improvement in enantioselectivity was found for the reaction catalyzed by horse heart metMb and a series of sperm whale metMb derivatives including the wild type protein, the active site mutants T67K Mb, T67R Mb, T67R/S92D Mb, and the T67K Mb derivative reconstituted with the modified prosthetic group protohemin-l- histidine methyl ester.     

SYNTHESIS AND THERMAL REARRANGEMENT OF 2-ALKOXYCARBONYL-3-ALKYL-4H-BENZO[b][1,4]THIAZINES

Abstract

The title compounds (4b-d) together with the benzothiazolines (5b-d) have been obtained by a reaction between 2,2′-dithiodianiline (1) and β-keto esters (2b-d). The reaction between 1 and the β-keto ester 2a gives 1,4-benzothiazine 3a in addition to the benzothiazoline 5a.

It has been established that the 1,4-benzothaizines 4b-d undergo an acid-catalysed thermal rearrangement involving a [1,3] shift of the sulfur atom, giving rise to the isomeric 1,4-benzothiazines 3b-d.     

Molecular evaluation of soil organic matter characteristics in three agricultural soils by improved off-line thermochemolysis: The effect of hydrofluoric acid demineralisation treatment

The molecular composition of soil organic matter (SOM) in three agricultural fields under different managements, was evaluated by off-line thermochemolysis followed by gas chromatography mass spectrometry analysis (THM-GC-MS). While this technique enabled the characterization of SOM components in coarse textured soil, its efficiency in heavy textured soils was seriously affected by the interference of clay minerals, which catalyzed the formation of secondary artifacts in pyrolysates. Soil demineralization with hydrofluoric acid (HF) solutions effectively improved the reliable characterization of organic compounds in clayey soils by thermochemolysis, while did not alter significantly the results of coarse textured soil. A wide range of lignin monomers and lipids molecules, of plant and microbial origin, were identified in the pyrograms of HF treated soils, thereby revealing interesting molecular differences between SOM management practices. Our results indicated that clay removal provided by HF pretreatment enhanced the capacity of thermochemolysis to be a valuable and accurate technique to study the SOM dynamics also in heavy-textured and OC-depleted cultivated soils.     

The Periodate‐Based Double Perovskites M2NaIO6 (M = Ca,Sr, and Ba)

The crystal structures of the M₂NaIO₆ series (M = Ca, Sr, Ba), prepared at 650 °C by ceramic methods, were determined from conventional laboratory X‐ray powder diffraction data. Synthesis and crystal growth were made by oxidizing I^– with O₂^(air) to I⁷⁺ followed by crystal growth in the presence of NaF as mineralizator, or by the reaction of the alkali‐metal periodate with the alkaline‐earth metal hydroxide. All three compounds are insoluble and stable in water. The barium compound crystallizes in the cubic space group Fm3m (no. 225) with lattice parameters of a = 8.3384(1) Å, whereas the strontium and calcium compounds crystallize in the monoclinic space group P2₁/c (no. 14) with a = 5.7600(1) Å, b = 5.7759(1) Å, c = 9.9742(1) Å, β = 125.362(1)° and a = 5.5376(1) Å, b = 5.7911(1) Å, c = 9.6055(1) Å, β = 124.300(1)°, respectively. The crystal structure consists of either symmetric (for Ba) or distorted (for Sr and Ca) perovskite superstructures. Ba₂NaIO₆ contains the first perfectly octahedral [IO₆]^5– unit reported. The compounds of the ortho‐periodates are stable up to 800 °C. Spectroscopic measurements as well as DFT calculations show a reasonable agreement between calculated and observed IR‐ and Raman‐active vibrations.