Identification of Shiga toxins in Shiga toxin-producing Escherichia coli using immunoprecipitation and high-performance liquid chromatography-electrospray ionization mass spectrometry

We developed a rapid and reliable identification method for Shiga toxins in Shiga toxin-producing Escherichia coli (STEC) using immunoprecipitation and high-performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-ESI-MS). Polyclonal antisera specific for Shiga toxin 1 (Stx1) and Shiga toxin 2 (Stx2) were raised in rabbits so as to be used for the immunoprecipitation. The immunoprecipitaion was carried out by mixing sample solutions with 50 microl each of the antisera to Stx1 and Stx2 followed by allowing the mixed solutions to stand for 30 min. The quantity required to obtain the immunoprecipitate was more than 0.5 microg of Shiga toxins. HPLC-ESI-MS analysis of the resulting immunoprecipitates provided accurate molecular weight information on Shiga toxins, leading to direct evidence for the presence of these toxins. It requires at most two days to perform our procedure from toxin extraction to measurement of HPLC-ESI-MS whereas the previous method using isolation procedures required about two weeks to complete. The usefulness of the present method has been demonstrated by identifying Stx1, Stx2 and a variant of Stx2 (Stx2e) in the immunoprecipitates prepared from STEC strains.     

Dissolution tests for self-setting calcium phosphate cement-containing nifedipine

Nifedipine-containing calcium phosphate cement (CPC) was prepared, and nifedipine (NF) release from this preparation was evaluated by the shaking method (SK), Japanese Pharmacopoeia XIV (JPXIV) paddle method (PD), and JPXIV flow-through cell method (FT). The release of NF from the CPC preparation continued for 7 d or longer by all these methods. This suggests that the release of NF can be controlled by preparing NF-containing CPC. The release pattern of NF from CPC in these tests was found to follow the Higuchi equation. However, the Higuchi constant differed among the three dissolution tests, probably because the apparent tortuosity of capillary system (tau) varied.     

Enhancement of water solubility of fullerene by cogrinding with mixture of cycloamyloses, novel cyclic alpha-1,4-glucans, via solid-solid mechanochemical reaction

Improvement of solubility for fullerene (C60) was studied by cogrinding with cycloamyloses using a ball mill in the solid state. Cycloamylose is a novel cyclic alpha-1,4-glucan produced from synthetic amylose by enzymatic reaction. Although sample solutions showed a pale yellow for the initial period of cogrinding with cycloamyloses and C60, the color varied to brown after 48 h. Subsequently, the solubility of C60 was improved markedly to 560 (microg/ml) at 96 h. From powder X-ray diffraction analysis, the peak intensity of crystalline C60 decreased as the cogrinding time was extended. The UV-VIS absorption spectrum of C60 shows absorption bands at 262 and 340 nm in water with cycloamyloses, and 258 and 328 nm in n-hexane. These results suggested that C60 molecules were dispersed into cycloamyloses micellar system and the red-shift of the UV-VIS spectra was due to an intermolecular interaction between C60 and cycloamyloses.     

Buffer-gas pressure broadening for the (3 0(0) 1)III <-- (0 0 0) band of CO2 measured with continuous-wave cavity ring-down spectroscopy

Buffer-gas pressure broadening for the (3 0(0) 1)(III)<--(0 0 0) band of CO(2) in the 1600 nm region was investigated with continuous wave cavity ring-down spectroscopy within the temperature range 263-326 K. The measured absorption profiles were analyzed with Voigt functions. Pressure broadening coefficient, gamma(gas), and the temperature dependent parameter (broadening exponent), n, were determined for a variety of buffer gases: N(2), O(2), He, Ne, Ar, Kr and Xe. gamma(air) values estimated subsequently are 0.096(2) for R(0), 0.085(5) for P(8), 0.075(2) for P(16), 0.070(4) for P(26), and 0.069(2) for P(38) in units of cm(-1) atm(-1), where numbers in parentheses are one standard deviation in units of the last digits quoted. n(air) values are 0.77(4) for R(0), and 0.73(11) for P(8).     

Molecular complex consisting of two typical external medicines: intermolecular interaction between indomethacin and lidocaine

The molecular complex formed between indomethacin (IDM) and lidocaine (LDC), which are typical external medicines, was studied. A thermal analysis, microscopic study and phase solubility technique suggested intermolecular interaction between IDM and LDC. The phase solubility profiles with IDM and LDC were classified as A(L)-type, indicating the formation of a 1 : 1 stoichiometric molecular complex. The apparent stability constant (K(S)), calculated from the slope and the intercept, was 4478.9 M(-1). A molecular ion peak was detected at 592.2 (m/z) from fast-atom bombardment-MS measurements, which was in accordance with the sum of the molecular weight for IDM (M(W): 357.81) and LDC (M(W): 234.38). The changes of IR spectra in the C=O stretching region showed that each intact hydrogen bond network was collapsed in the IDM-LDC system and strong interaction between IDM and LDC formed after their kneading. From the (1)H-NMR analyses, it was estimated that the dominant interactive site was the IDM carboxylic acid group which associated with the LDC diethyl amino group non-covalently.     

High-performance liquid chromatography-fluorometry for the determination of thiols in biological samples using N-[4-(6-dimethylamino-2-benzofuranyl) phenyl]-maleimide

The selective determination of thiols in biological samples was investigated by high-performance liquid chromatography using N-[4-(6-dimethylamino-2-benzofuranyl)phenyl] maleimide, which was found to give fluorescent products when treated with certain thiols. Six kinds of thiol (reduced glutathione, cysteine, N-acetylcysteine, cysteamine, homocysteine and coenzyme A) could be separated simultaneously within ca. 12 min and determined at final level of sensitivity. The method was successfully applied to the determination of thiols in rat tissues and plasma and in human normal serum.     

Analysis of serum protein precipitated with antiserum by matrix-assisted laser desorption ionization/time-of-flight and electrospray ionization mass spectrometry as a clinical laboratory test

Serum transferrin precipitated with specific antisera was analyzed by matrix-assisted laser desorption ionization/time-of-flight mass spectrometry (MALDI/TOF-MS) and electrospray ionization-mass spectrometry (ESI-MS). When analyzed by MALDI, transferrin showed signal peaks that clearly could be separated from ions of IgG present in the immunoprecipitate. By ESI-MS, when the immunoprecipitates were loaded through a microcapillary polymeric reversed-phase column connected to the electrospray ionization probe, the mass spectra of transferrin were observed with a high signal-to-noise ratio and good resolution. By MALDI/TOF-MS, the observed molecular weight of normal transferrin was ～ 1.2 ku smaller when analyzed in the reflectron mode than in the linear mode. The observed molecular weight of transferrin treated with sialidase was approximately the same in both modes. A comparison between the results obtained in both modes may help to estimate the number of sialic acids on the protein molecule. A transferrin isoform with a molecular weight of ～2.2 ku less than the normal species was identified in the serum of patients with a carbohydrate-deficient glycoprotein syndrome as well as in heavy alcohol consumers.     

Evaluation of the degree of mixing of combinations of dry syrup, powder, and fine granule products in consideration of particle size distribution using near infrared spectrometry

We used near infrared (NIR) spectroscopy to evaluate the degree of mixing of blended dry syrup (DS) products whose particle sizes are not specified in the Revised 16th Edition of the Japanese Pharmacopoeia, and also evaluated the degree of mixing when powder products or fine granule products were added to DS products. The data obtained were used to investigate the relationship between the particle size distributions of the products studied and the degree of mixing. We found that the particle size distribution characteristics of the 15 DS products studied can be broadly classified into 5 types. Combinations of frequently prescribed products were selected to represent 4 of the 5 particle size distribution types and were blended with a mortar and pestle. The coefficient of variation (CV) decreased as the percent mass of Asverin? Dry Syrup 2% (Asverin-DS) increased in blends of Periactin? Powder 1% (Periactin) and Asverin-DS, indicating an improved degree of mixing (uniformity). In contrast, in blends of Periactin and Mucodyne? DS 33.3%, mixing a combination at a 1:1 mass ratio 40 times resulted in a CV of 20%. Other mixing frequencies and mass ratios resulted in a CV by 50% to 70%, indicating a very poor degree of mixing (poor uniformity). These results suggest that when combining different DSs, or a DS with a powder or fine granule product, the blending obtained with a mortar and pestle improves as the particle size distributions of the components approach each other and as the ranges of the distributions narrow.     

Preparation of Metal-free phthalocyanine using the benzenetellurolate ion

Metal-free phthalocyanine was prepared from o-phthalonitrile using the benzenetellurolate ion in ethanol. Furthermore, the yield of metal-free phthalocyanine using the benzenetellurolate ion was compared with that using the benzeneselenolate ion or the benzenethiolate ion.     

Syntheses, structures, spectroscopic properties, and pi-dimeric interactions of [n.n]quinquethiophenophanes

A cyclophane-type of dimeric quinquethiophenes (4a-e) with the bridge chains consecutively varying from two to six methylenes has been synthesized and studied as ideal pi-dimer models. The double-decker structures of these compounds are verified by upfield shifts for the proton NMR signals of the inside thiophenes, as compared to those of monomeric dimethylquinquethiophene (3). The electronic absorption and emission spectra of 4a-e are perturbed by through-space pi-electronic interactions involving exciton-exciton coupling between the two overlapped quinquethiophenes, which become marked with shortening of the bridged alkylene chains. One-electron oxidation of 4a-e with FeCl(3) in dichloromethane results in the appearance of specific polaronic bands in the near-infrared region of the electronic absorption spectra, due to the generation of a radical cation species (polaron) on one of the quinquethiophenes, which electronically interacts with the remaining neutral species. Two-electron oxidation of 4a-e introduces spectral changes, revealing that the resulting two quinquethiophene radical cations readily form an intramolecular pi-dimer, thanks to their close stacking, in contrast to the difficult formation of an intermolecular pi-dimer from 3. The pi-dimeric spectra of 4b-e are comprised of two strong absorption bands, similar to that of 3, the low-energy band of which is considerably red-shifted by an effective pi-dimeric interaction depending on the lengths of the bridged alkylene chains. Quite different is the spectrum of 4a with three absorption bands inherent in pi-dimer, presumably because the two short bridging chains of 4a force the pi-dimer to take a constrained, strongly interactive structure.