Analytical investigation of two-step adsorption kinetics on surfaces

Analytical equations of two-step adsorption kinetics on surface have been derived. Moreover, computer simulations have been carried out to interpret various experimental adsorption kinetics previously reported. In the first case, molecules are further adsorbed from a solution onto a layer consisting of previously adsorbed molecules. This model was applied to the adsorption kinetics of hexadecyltrimethylammonium chloride (C16TAC) on a self-assembled monolayer (SAM) of 3-mercaptopropionic acid (T. Imae, H. Torii, J. Phys. Chem. B 104 (2000) 9218). The second case is that some of the initially adsorbed molecules are released from the adlayer with further time course. The adsorption of C16TAC on 1-dodecanethiol SAM (T. Imae, T. Takeshita, K. Yahagi, Stud. Surf. Sci. Catal. 132 (2001) 477) agrees with this mechanism. The strict mathematical developments presented in this work are demanded to specify the physical meaning of observed non-Langmuir adsorption kinetics, consisting of the two exponential terms.     

Film structures of poly(amido amine) dendrimers with an azacrown core and long alkyl chain spacers on water or Ag nanoparticle suspension

Newly designed poly(amido amine) dendrimers, which have an azacrown core, hexyl spacers, and methyl ester terminals (aza-C6-PAMAM dendrimer), were spread at the air-water and air-silver nanoparticle suspension interfaces, and their film structures were examined by surface pressure-area (pi-A) and surface potential-area (DeltaV-A) isotherms and epifluorescence microscopy. It was revealed that generation (G) 1.5 aza-C6-PAMAM dendrimer on a water subphase formed homogeneous film with face-on configuration, and this configuration was maintained during compression. On the other hand, a G2.5 dendrimer film on the air-water interface took initially homogeneous and face-on configuration that was followed by the conformational change during compression. Using a silver nanoparticle suspension as subphase, G1.5 film was significantly reinforced, and the partial collapse (cracks) in the film appeared as network texture. For a G2.5 dendrimer film, the pi-A and DeltaV-A isotherm properties were similar to that on the water subphase except for the collapsed film; small spots instead of cracks were formed under the film after collapse. These effects of the silver nanoparticle may be due to the formation of a dendrimer/silver nanoparticle composite. The formation process of the nanocomposite film was verified by UV-vis spectroscopy. For the G1.5 dendrimer, silver clusters and nanoparticles adsorbed to the dendrimer film after spreading and formed a small amount of aggregates. During compression, the aggregation proceeded even at low surface pressure. For the G2.5 dendrimer, a dendrimer/nanoparticle composite was also formed after spreading. However, with the initial compression, the absorption bands of clusters, nanoparticles, and aggregate increased together. Upon further compression, while the bands of cluster and nanoparticles decreased, the bands of aggregate still increased. These results suggest that the G2.5 dendrimer covered the cluster and nanoparticles more efficiently than the G1.5 dendrimer did because of the larger molecular size.     

Efficient biocatalysis for the production of enantiopure (S)-epoxides using a styrene monooxygenase (SMO) and Leifsonia alcohol dehydrogenase (LSADH) system

Herein we report the production of enantiopure epoxides through biocatalysis using recombinant Escherichia coli cells expressing Rhodococcus sp. ST-10 styrene monooxygenase (SMO) and Leifsonia sp. S749 alcohol dehydrogenase (LSADH) genes are described. Rhodococcus sp. ST-10 SMO catalyzed the epoxidation of various alkenes, including styrene derivatives, vinyl pyridines, and linear alkenes, to give (S)-epoxides. NADH was regenerated by the reduction of NAD⁺ by LSADH with 2-propanol. The E. coli biocatalyst was used in an aqueous/organic biphasic reaction system and the reaction conditions were optimized. Under the optimized conditions, 170 mM of (S)-styrene oxide was obtained from styrene in the organic phase with excellent enantiomeric excess (99.8%). This biocatalytic process was used to synthesize various (S)-epoxides.     

Preparation of free‐standing silicone particles in aqueous heterogeneous system

To prepare cross‐linked silicone (silicone rubber) particles in an aqueous medium, we investigated two synthesis methods involving a miniemulsion system. The first method was based on cationic ring‐opening polymerization of cyclic siloxane, which is a common synthetic route for linear silicone oil and uses octamethylcyclotetrasiloxane (D₄) as the monomer and dimeric D₄ (bis‐D₄) as the cross‐linker. Although this method produces silicone particles, the particles do not remain in the particulate state after drying because of low cross‐linking density. The polymerization mechanism of this method was also investigated, which proceeds under the ring‐opening reaction of D₄ in monomer droplets and upon polycondensation of hydrolyzed D₄, which occurs in the water phase (ie, outside the monomer droplets). This mechanism implied that introducing the cross‐linking structure into particles is difficult because of the low solubility of bis‐D₄ in water. To overcome these difficulties, we demonstrated a second method of preparing silicone particles based on the thiol‐Michael addition reaction between thiol‐terminated silicone oil and triacrylate in miniemulsion systems. Transmission electron microscopy images indicated that the silicone particles obtained in the particulate state upon drying and the aggregates of these particles showed elasticity.     

Aggregation Properties of Sodium Hyaluronate with Alkanediyl-alpha,omega-bis(dimethylalkylammonium Bromide) Surfactants in Aqueous Sodium Chloride Solution

Lysine, which is an amino acid with a basic side group, is present in biological fluids and its role in the biological calcification process was investigated. It was found to inhibit the crystal growth rate of hydroxyapatite (HAP), in solutions supersaturated only with respect to this calcium phosphate salt and this rate reduction was attributed to adsorption and further blocking of the active growth sites on the crystal surface. The crystallization kinetics were interpreted in terms of the Langmuir adsorption model. The apparent order of the crystallization reaction was found to be n=2, suggesting a surface diffusion controlled spiral growth mechanism. Kinetic results of HAP crystallization were obtained using the constant composition method where the concentration of the reactants is kept constant during the course of the crystal growth experiment. Copyright 2000 Academic Press.     

Fluorescence quenching of 3,7-diamino-2,8-dimethyl-5-phenyl phenazinium chloride by AgCl and Ag nanoparticles

Quenching of fluorescence of the dye 3,7-diamino-2,8-dimethyl-5-phenyl Phenazinium Chloride (Safranine T) has been investigated by AgCl nanoparticles in the W/O microemulsion medium at different [H₂O]/[AOT] ratios (ω) and with Ag nanoparticles and Ag⁺ in aqueous medium. A simple straightforward method has been introduced to prepare AgCl nanoparticles in well-characterized, monodispersed biomimicking nanocavities formed by sodium bis(2-ethylhexyl)sulfosuccinate (AOT) in heptane. Experimental results reveal that the size of the AgCl nanoparticles increases with increase in hydration. The results of the quenching experiment were analysed in the light of Stern Volmer equation. Quenching of fluorescence of the dye has been found to decrease with decrease in the size of the nanoparticles of AgCl and the variation of Stern Volmer quenching constants (K_SV) with particle size is different for two different size regimes.     

Synthesis and thermal properties of disiloxane-arylene polymers by dehydrocoupling polymerization of bis(dimethylsilyl)arylene with water

Disiloxane-arylene polymers having phenylene, biphenylene, and fluorenylene groups as arylene units were synthesized by dehydrocoupling polymerization of corresponding bis(silane) derivatives with water. The reactivity of Si-H was not affected by the structure of aromatic groups in the reaction. The polymers containing biphenylene and fluorenylene units are amorphous and show higher glass transition temperatures than the polymer from 1,4-bis(dimethylsilyl)benzene.     

Visual observation of avidin-biotin affinity by fluorescent G4.5 poly(amidoamine) dendrimer

An air-treated G4.5 poly(amidoamine) (PAMAM) dendrimer displayed the enhanced fluorescence enough to be utilized as a fluorescence marker to visualize avidin-biotin affinity: On a fluorescence microscopic image, the avidin labeled by a fluorescent G4.5 PAMAM dendrimer was observed to be selectively bound on the biotin pattern that was prepared by amide-bonding of biotin on a carboxylic acid-terminated self-assembled monolayer and in turn by UV-irradiation with a photomask on the monolayer.