A versatile protocol for the preparation of substituted 1- and 2-naphthyl piperazines from aminonaphthols

Aminonaphthols are easily transformed into a variety of 1- and 2-naphthyl piperazines using a sequence of diazotization, iodide substitution and Pd(0) catalyzed coupling reactions.     

Magnetic properties of mechanically alloyed Co–Ti powder

An amorphous phase containing traces of non-transformed Co and Ti powders was obtained by mechanical alloying nominal compositions of Co₆₇Ti₃₃ and Co₅₀Ti₅₀ in a high-energy ball-mill. These alloys were prepared from elemental powders of Co and Ti. The heat treatment of Co₆₇Ti₃₃ at 573, 873 and 1173 K crystallized nanoparticles of Co₂Ti and Co₃Ti compounds, while the same treatments conducted on Co₅₀Ti₅₀ resulted in the formation of Co₂Ti and CoTi nanoparticles. The saturation magnetizations reached a maximum value in the amorphous state and they decreased when the temperatures of the heat treatment rose. Demagnetizing interparticle interaction effects were estimated through hysteresis loops and initial magnetization curves using the Fourier technique.     

The 3-D FEL pulse propagation equation: An analytical treatment in the low-gain and small-signal regime

Summary In this paper we show that the transverse mode evolution of a FEL operating with short pulses can be treated, in the small-signal and low-gain regime, using a relatively simple mathematical technique leading to a potentially fast numerical algorithm. We also point out that analytical solutions can be obtained for the cases where the slippage length is small compared to the longitudinal bunch length.     

Continuous automatic determination of ammonia by using an integrated separation/detection unit

An automatic continuous-flow photometric method for the determination of ammonia is proposed. It is based on the Berthelot reaction, the product of which is temporarily immobilized on a suitable support (Sephadex QAE) located in the flow-cell. The retained product is eluted after measurement by a cationic surfactant contained in the carrier solution. The method allows the determination of the analyte between 0.4 and 20.0 gmg/ml, with an RSD of 0.8%, at a sampling frequency of 13/hr. The determination limit can be reduced by a factor of ten by using a flow-cell with a two-fold longer path length, but the sampling frequency is also reduced as a result. The method was applied to the determination of this analyte in agricultural samples (plants and soils) and compared with standard methods for these types of samples.     

Study of the Crystallization of an Aromatic Poly-ether-ketone (PK99) by Calorimetric and X-ray Analysis

An analysis of the crystallization behaviour of a new poly(aryl-ether-ether-ketone-ketone), PK99, by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) is presented. Isothermal crystallization TG were obtained in the whole range between the glass transition temperature (T _g) and the melting temperature (T _m) as a consequence of the slow crystallization kinetics stemming from the closeness of these transitions. The calorimetric results, compared with WAXD data, were applied to determine the theoretical melting temperature and crystallization enthalpy. The DSC and WAXD data were combined in order to calculate the total amount of the crystallizable fraction of the polymer, and a model was proposed to explain the difference between the fractions of crystallinity observed with these techniques. The thermal and X-ray data were also correlated with different lamellar morphologies arising from the crystallization conditions. Finally, DSC experiments on the crystallized sample were used to detect the presence of a rigid amorphous phase which does not relax at T _g. This revised version was published online in July 2006 with corrections to the Cover Date.     

Carbon fiber cylindrical microelectrode-based detector for the determination of antithyroid drugs

An amperometric flow-injection method for the determination of antithyroid drugs such as 6-methyl-2-thiouracil (MTU) using a carbon fiber cylindrical microelectrode-based detector is reported. A home-made flow-cell specially adapted for working with cylindrical microelectrodes ranging between 4 and 10 mm in length was used for this purpose. Methanol containing 0.05 mol l(-1) tetrabutylammonium perchlorate as the supporting electrolyte was employed, and a potential of +1.6 V was selected for the amperometric detection of MTU. No cleaning or electrode surface regeneration of the fiber was necessary during the whole working day. A limit of detection of 2.6x10(-7) mol l(-1) (37 mug MTU l(-1)) was achieved. The method was applied to the determination of MTU in spiked feed samples (peas and corn flour), at the 142 mug g(-1) level. The procedure involved the extraction of the drug in methanol, a clean-up step using Florisil cartridges and the use of the standard additions method. Recoveries of 81+/-6 and 85+/-8% were obtained for peas and corn flour, respectively.     

Second-generation mimics of ganglioside GM1 oligosaccharide: a three-dimensional view of their interactions with bacterial enterotoxins by NMR and computational methods

As a step to delineate a strategy of ligand design for cholera toxin (CT), NMR studies were performed on several mimics of the GM1 ganglioside oligosaccharide. The conformation of these analogues was investigated first in solution and then upon binding to cholera toxin by transferred nuclear Overhauser effect (TR-NOE) measurements. It was demonstrated that CT selects a conformation similar to the global minima of the free saccharides from the ensemble of presented conformations. No evidence of major conformational distortions was obtained, but one or two of the available conformers of the hydroxyacid side chain appear to be selected in the bound state. The NMR data were interpreted with the aid of computer models, generated and analyzed by using a combination of different approaches (MacroModels' MC/EM and MC/SD, Autodock, and GRID). Analysis of the NMR data supported by computational studies allowed us to interpret the experimental observations and to derive workable models of the ligand:toxin complexes. These models suggest that the higher affinity of the (R)-lactic acid derivative 3 may stem from lipophilic interactions with a hydrophobic area in the toxin binding site located in the vicinity of the sialic acid side chain binding region of the CT:GM1 complex, and formed by the side chain of Ile-58 and Lys-34. Thus, the models obtained have allowed us to make useful design suggestions for the improvement of ligand affinity.     

Stereochemical analysis of 3,4-methylenedioxymethamphetamine and its main metabolites by gas chromatography/mass spectrometry

3,4-Methylenedioxymethamphetamine (MDMA, ecstasy) is consumed as the racemate but some metabolic steps are enantioselective. In addition, chiral properties are preserved during MDMA biotransformation. A quantitative analytical methodology using gas chromatography/mass spectrometry (GC/MS) to determine enantioselective disposition in the body of MDMA and its main metabolites including 3,4-methylenedioxyamphetamine (MDA), 4-hydroxy-3-methoxymethamphetamine (HMMA), and 4-hydroxy-3-methoxyamphetamine (HMA) was developed. Plasma and urine samples were collected from a male volunteer. The analysis of MDMA, MDA, and 4-hydroxy-3-methoxy metabolites by GC/MS required a two-step derivatization procedure. The first step consisted of derivatization of the amine with enantiomerically pure Mosher's reagent ((R)-MTPCl). Triethylamine was used as a base to neutralize hydrochloric acid formed during the reaction allowing quantitative derivatization, which resulted in a substantial improvement in the sensitivity of the method compared with other previously described techniques. Further treatment with ammonium hydroxide was required since both amine and hydroxyl groups underwent derivatization in the reaction. Ammonium hydroxide breaks bonds formed with hydroxyl groups without affecting amine derivatives. The second derivatization step using hexamethyldisilazane was needed for metabolites containing phenol residues. This derivatization method permitted the stereochemically specific study of MDMA and its main monohydroxylated metabolites by GC/MS. A detailed study of the chemical reactions involved in the derivatization steps was indispensable to develop a straightforward, sensitive, and reproducible method for the analysis of the parent drug compound and its metabolites.     

Some chemical transformations of the neo-clerodane diterpene teubotrin

Starting from the natural neo-clerodane diterpenoid teubotrin (1) several neo-clerodane derivatives (3-7,9-11) have been obtained. The naturally occurring diterpenoid teuscordinon (12) has also been synthesized from teubotrin (1), showing thereby how some of these transformations can be useful for the synthesis of other natural neo-clerodane diterpenes. The latter are of interest due to their activity as insect antifeedants and other important biological properties.