Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Anomalous PL brightening caused by partial Auger recombination of a (D, X) complex during an impact ionization avalanche in n-GaAs

Partial Auger recombination of the (D⁰, X) bound-exciton in n-GaAs at 4.2 K during an impact ionization avalanche under an applied pulse voltage has been investigated. The bright photoluminescence (PL)-pattern observed by applying the pulse voltage, characterizes well the formation of a current density filament. The observation of the bright PL spectra inside the current density filament gives a quite new result concerning the partial Auger recombination process of the (D⁰, X) complex, leaving the neutral donor in the excited states.     

Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

Asymmetric cyclization of 2-alkenylphenols. A comparative study on the use of palladium(II) and titanium(IV) complexes

The oxidative cyclization of 2-(3-pentenyl)phenol catalyzed by [(η³-pinene)PdOAc]₂ gives optically active (+)-2-vinylchroman (25% e.e.), while (−)-2-(1-hydroxyethyl)chroman (56% e.e.) is formed as a single diastereomer upon treatment with t-BuOOH in the presence of Ti(OⁱPr)₄ and -(+)-diethyl tartrate. 2-(2-Butenyl)phenol also undergoes the Ti-promoted asymmetric cyclization to give (2S,1′R)-(−)-2-(1-hydroxyethyl)-2,3-dihydrobenzofuran (29% e.e.).     

Improvement of latex piezoelectric immunoassay: Detection of rheumatoid factor

Latex piezoelectric immunoassay is a method for detection of agglutination of antibody- or antigen-bearing latex by immunoreaction using a piezoelectric quartz crystal; the agglutination decreases the oscillation frequency of the crystal. This is advantageous in that coating the surface of the crystal followed by fixation of antibody or antigen is unnecessary. There is, however, a drawback, and to improve this, we designed a micro-cell in which only one side of the crystal is exposed to the solution. A method for regenerating the crystal was also devised. Measurement was carried out using a calibration curve of the frequency change against rheumatoid factor activity. The improvement made it possible to use one crystal repeatedly and reproducibility was satisfactory. The calibration curve became almost independent of the crystal used.     

Reaction of azole condensed quinoxaline N-oxides with acetic anhydride

The reaction of 7-chlorotetrazolo[1,5-α]quinoxaline 5-oxide 6a with acetic anhydride gave 7-chloro-5-(7-chlorotetrazolo[1,5-α]quinoxalin-4-yl)-4,5-dihydro-4-oxotetrazolo[1,5-α]quinoxaline 7a , while the reaction of 7-chloro-1,2,4-triazolo[4,3-α]quinoxaline 5-oxide 6b with acetic anhydride afforded 7-chloro-5-(7-chloro-1,2,4-triazolo[4,3-α]quinoxalin-4-yl)-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 7b and 7-chloro-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 8b . The reaction of compound 6a or 6b with acetic anhydride/acetic acid provided 7-chloro-4,5-dihydro-4-oxo-tetrazolo[1,5-α]quinoxaline 8a or compound 8b , respectively.