Highly efficient electrocatalytic hydrogen evolution promoted by O–Mo–C interfaces of ultrafine β-Mo2C nanostructures

Optimizing interfacial contacts and thus electron transfer phenomena in heterogeneous electrocatalysts is an effective approach for enhancing electrocatalytic performance. Herein, we successfully synthesized ultrafine β-Mo₂C nanoparticles confined within hollow capsules of nitrogen-doped porous carbon (β-Mo₂C@NPCC) and found that the surface layer of molybdenum atoms was further oxidized to a single Mo–O surface layer, thus producing intimate O–Mo–C interfaces. An arsenal of complementary technologies, including XPS, atomic-resolution HAADF-STEM, and XAS analysis clearly reveals the existence of O–Mo–C interfaces for these surface-engineered ultrafine nanostructures. The β-Mo₂C@NPCC electrocatalyst exhibited excellent electrocatalytic activity for the hydrogen evolution reaction (HER) in water. Theoretical studies indicate that the highly accessible ultrathin O–Mo–C interfaces serving as the active sites are crucial to the HER performance and underpinned the outstanding electrocatalytic performance of β-Mo₂C@NPCC. This proof-of-concept study opens a new avenue for the fabrication of highly efficient catalysts for HER and other applications, whilst further demonstrating the importance of exposed interfaces and interfacial contacts in efficient electrocatalysis.

Ultrafine β-Mo₂C nanostructures encapsulated in N-doped carbon capsules featuring O–Mo–C interfaces as the active sites for HER have been unveiled.     

Magnetic-fluorescent nanocomposites for biomedical multitasking

Fluorescent magnetite nanocomposites based on magnetic nanoparticles, a polyhedral octaaminopropylsilsesquioxane and a porphyrin derivative have been prepared. The intracellular uptake of the nanocomposites by macrophage and bone osteoblast cells, and their potential as MRI contrast agents, has been demonstrated.     

Toward [18F]-labeled aryltrifluoroborate radiotracers: in vivo positron emission tomography imaging of stable aryltrifluoroborate clearance in mice

The use of a boronic ester as a captor of aqueous [(18)F]-fluoride has been previously suggested as a means of labeling biomolecules in one step for positron emission tomography (PET) imaging. For this approach to be seriously considered, the [(18)F]-labeled trifluoroborate should be humorally stable such that it neither leaches free [(18)F]-fluoride to the bone nor accumulates therein. Herein, we have synthesized a biotinylated boronic ester that is converted to the corresponding trifluoroborate salt in the presence of aqueous [(18)F]-fluoride. In keeping with its in vitro aqueous kinetic stability at pH 7.5, the trifluoroborate appears to clear in vivo quite rapidly to the bladder as the stable trifluoroborate salt with no detectable leaching of free [(18)F]-fluoride to the bone. When this labeled biotin is preincubated with avidin, the pharmacokinetic clearance of the resulting complex is visibly altered. This work validates initial claims that boronic esters are potentially useful as readily labeled precursors to [(18)F]-PET reagents.     

Roughness measurement of metallic surfaces based on the laser speckle contrast method

A method of measuring surface roughness of flat lapped, ground and polished metallic surfaces, by the far-field speckle contrast method is presented in this paper. The laser speckle contrast technique depends on the existence of an approximately linear relationship between the speckle contrast and the roughness of the illuminated surface. Initially it was shown that the linear relationship existed up to 0.1 μm Ra (centre-line average) roughness using Helium–Neon light, after which a saturation effect was observed. The effect of varying the incident angle of illumination was investigated with a view to extending the measurement range. The use of high incident angles of illumination has been found to increase the surface roughness range up to 0.4 μm measurement Ra.     

Luminescent silole nanoparticles as chemoselective sensors for Cr(VI)

Colloidal suspensions of 3-aminopropylmethyl(tetraphenyl)silole nanoparticles can be used as selective chemosensors for carcinogenic chromium(VI) analyte. Methylhydrosilole is functionalized by hydrosilation of allylamine, and the colloid is prepared by the rapid addition of water to a THF solution of the silole. The method of detection is through electron-transfer quenching of the fluorescence of the silole colloid (lambda(em) = 485 nm at 360 nm excitation) by the analytes, with hundred parts per billion detection limits. Stern-Volmer plots are linear up to 10 ppm in the case of chromium, but exhibit saturation behavior near 5-10 ppm for arsenic. Dynamic light scattering experiments and AFM measurements show the particle sizes to be around 100 nm in diameter and dependent on solvent composition, with a particle size dispersity of +/-25%. The fluorescence lifetimes of the silole in solution and colloid are approximately 31 ps and approximately 4.3 ns, respectively, while the silole has a lifetime of 6 ns in the bulk solid. A minimum volume fraction of 80% water is necessary to precipitate the colloid from THF, and the luminescence continues to rise with higher water fractions. Colloids in a pH 7 phosphate-buffered suspension show both higher sensitivity and greater selectivity (100-fold) for CrO4(2-) detection than for other oxoanion interferents, NO3-, NO2-, SO4(2-), and ClO4-.     

Electronic speckle-pattern interferometer using holographic optical elements for vibration measurements

We report a simple, compact electronic speckle-pattern interferometer (ESPI) incorporating holographic optical elements (HOEs) for the study of out-of-plane vibration. Reflection and transmission HOEs provide reference and object beams in the interferometer. The alignment difficulties with conventional ESPI systems are minimized using HOEs. The time-average ESPI subtraction method is used to generate the fringe pattern and remove background speckle noise by introducing a phase shift between consecutive images. The amplitude and phase maps are obtained using path-difference modulation.     

Spectroscopic characterization of micro-phase separated blends of polystyrene/polymethyl methacrylate (PS/PMMA)

An investigation of the miscibility behaviour in polystyrene/ polymethyl methacrylate (PS/PMMA) blends of various compositions under different evaporations protocols using Fourier transform infrared (FT-IR) and Raman Spectroscopic techniques took place in the study. Solvent selection and evaporation rates, coupled with variations in the blend composition resulted in completely different miscibility behaviour for these systems. In particular, it was found that blends with low PMMA content result in systems that exhibit PMMA domains of less than 7 microns on average. Finally, depth profiling studies of the PMMA moiety in the PS matrix show that the distribution of the low content phase is highly affected by the solvent selection as well as the blend composition.     

Electro-optical switching of liquid crystal diffraction gratings by using surface relief effect in the photopolymer

Surface relief patterns are one of the promising possibilities for the fabrication of liquid crystal (LC) electro-optical devices. Optically recorded surface relief gratings in an acrylamide based photopolymer were filled with the liquid crystal to fabricate liquid crystal diffraction gratings. E49 liquid crystals were used in this work. The switching behaviour of the diffraction grating was investigated by measuring the intensity in the first order when an electric field was applied.     

A multiple laser beam probe system for turbulence diagnostics

Deatils are given of a multiple laser beam probe for sizing and velocity measurements in turbulent media. Sample results are presented in the case of thermal turbulent convection in a model buble chamber.