Towards the stable chelation of radium for biomedical applications with an 18-membered macrocyclic ligand

Targeted alpha therapy is an emerging strategy for the treatment of disseminated cancer. [²²³Ra]RaCl₂ is the only clinically approved alpha particle-emitting drug, and it is used to treat castrate-resistant prostate cancer bone metastases, to which [²²³Ra]Ra²⁺ localizes. To specifically direct [²²³Ra]Ra²⁺ to non-osseous disease sites, chelation and conjugation to a cancer-targeting moiety is necessary. Although previous efforts to stably chelate [²²³Ra]Ra²⁺ for this purpose have had limited success, here we report a biologically stable radiocomplex with the 18-membered macrocyclic chelator macropa. Quantitative labeling of macropa with [²²³Ra]Ra²⁺ was accomplished within 5 min at room temperature with a radiolabeling efficiency of >95%, representing a significant advancement over conventional chelators such as DOTA and EDTA, which were unable to completely complex [²²³Ra]Ra²⁺ under these conditions. [²²³Ra][Ra(macropa)] was highly stable in human serum and exhibited dramatically reduced bone and spleen uptake in mice in comparison to bone-targeted [²²³Ra]RaCl₂, signifying that [²²³Ra][Ra(macropa)] remains intact in vivo. Upon conjugation of macropa to a single amino acid β-alanine as well as to the prostate-specific membrane antigen-targeting peptide DUPA, both constructs retained high affinity for ²²³Ra, complexing >95% of Ra²⁺ in solution. Furthermore, [²²³Ra][Ra(macropa-β-alanine)] was rapidly cleared from mice and showed low ²²³Ra bone absorption, indicating that this conjugate is stable under biological conditions. Unexpectedly, this stability was lost upon conjugation of macropa to DUPA, which suggests a role of targeting vectors in complex stability in vivo for this system. Nonetheless, our successful demonstration of efficient radiolabeling of the β-alanine conjugate with ²²³Ra and its subsequent stability in vivo establishes for the first time the possibility of delivering [²²³Ra]Ra²⁺ to metastases outside of the bone using functionalized chelators, marking a significant expansion of the therapeutic utility of this radiometal in the clinic.

The therapeutic alpha-emitter ²²³Ra can be stably complexed in vivo, creating opportunities for the development of targeted radiopharmaceutical agents with this radionuclide.     

Convenient synthesis of Cu3(BTC)2 encapsulated Keggin heteropolyacid nanomaterial for application in catalysis

Nanomaterial of Cu(3)(BTC)(2) (BTC = benzene tricarboxylic acid) incorporating Keggin heteropolyacid conveniently prepared at room temperature and recovered by freeze drying outperforms ultrastable Y zeolite in acid catalysed esterification reaction.     

Quantitative Prediction of Rate Constants for Aqueous Racemization To Avoid Pointless Stereoselective Syntheses

Racemization has a large impact upon the biological properties of molecules but the chemical scope of compounds with known rate constants for racemization in aqueous conditions was hitherto limited. To address this remarkable blind spot, we have measured the kinetics for racemization of 28 compounds using circular dichroism and ¹H NMR spectroscopy. We show that rate constants for racemization (measured by ourselves and others) correlate well with deprotonation energies from quantum mechanical (QM) and group contribution calculations. Such calculations thus provide predictions of the second‐order rate constants for general‐base‐catalyzed racemization that are usefully accurate. When applied to recent publications describing the stereoselective synthesis of compounds of purported biological value, the calculations reveal that racemization would be sufficiently fast to render these expensive syntheses pointless.     

Anti-Markovnikov hydroamination and hydrothiolation of electron-deficient vinylarenes catalyzed by well-defined monomeric copper(I) amido and thiolate complexes

Monomeric Cu(I) amido and thiolate complexes that are supported by the N-heterocyclic carbene ligand 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (IPr) catalyze the hydroamination and hydrothiolation of electron-deficient vinylarenes with reactivity patterns that are consistent with an intermolecular nucleophilic addition of the amido/thiolate ligand of (IPr)Cu(XR) (X = NH or S; R = Ph, CH2Ph) to free vinylarene.     

Spin-forbidden ligand binding to the ferrous-heme group: ab initio and DFT studies

The potential energy surfaces (PESs) and associated energy barriers that characterize the spin-forbidden recombination reactions of the gas-phase ferrous deoxy-heme group with CO, NO, and H2O ligands have been calculated using density functional theory (DFT). The bond energy for binding of O2 has also been calculated. Extensive large basis set CCSD(T) calculations on two small models of the heme group have been used to calibrate the accuracy of different DFT functionals for treating these systems. Pure functionals are shown to overestimate the stability of the low-spin forms of the deoxy-heme model, and to overestimate the binding energy of H2O and CO, whereas hybrid functionals such as B3PW91 and B3LYP yield accurate results. Accordingly, the latter functionals have been used to explore the PESs for binding. CO binding is found to involve a significant barrier of ca. 3 kcal mol-1 due to the need to change from the deoxy-heme quintet ground state to the bound singlet state. Binding of water does not involve a barrier, but the resulting bond is weak and may be further weakened in the protein environment, which should explain why water binding is not usually observed in heme proteins such as myoglobin. NO binding involves a low barrier, which is consistent with observed rapid geminate recombination. The calculated bond energies are in good agreement with previous reported values and in fair agreement with experiment for CO and O2. The value for NO is significantly lower than the experimentally derived bond energy, suggesting that B3LYP is less accurate in this case.     

Combined experimental and computational study of W(II), Ru(II), Pt(IV) and Cu(I) amine and amido complexes using 15N NMR spectroscopy

Using 2D proton-coupled gHSQC pulse sequences in addition to 1D ¹⁵N NMR experiments of ¹⁵N labeled systems, ¹⁵N NMR chemical shifts of a range of transition metal amido and amine complexes were determined. Tungsten(II), ruthenium(II), platinum(IV) and copper(I) complexes with aniline and their anilido variants were studied and compared to free aniline, lithium anilido and anilinium tetrafluoroborate. Upon coordination of aniline to transition metals, upfield chemical shifts of 20–60 ppm were observed. Deprotonation of the amine complexes to form amido complexes resulted in downfield chemical shifts of 40–60 ppm for all of the complexes except for the tungsten d⁴ system. For the tungsten(II) complexes, the cationic aniline complex displayed a downfield shift of approximately 56 ppm relative to the neutral anilido complex. The change in chemical shift for amine to amido conversion is proposed to depend on the ability of the amido ligand to π-bond with the metal center, which influences the magnitude of the paramagnetic screening term.     

Detection of bacterial contaminated milk by means of a quartz crystal microbalance based electronic nose

Headspace analysis by means of sensor arrays has been successfully applied to a wide range of qualitative applications. In this study, a six element array of coated Quartz Crystal Microbalance (QCM) sensors was used for the headspace analysis of milk volatiles. The sensors were exposed to uncontaminated samples of milk and samples contaminated with Pseudomonas fragi (Ps. fragi) or Escherichia coli (E. coli). Principal component analysis (PCA) was used to analyse the sensor array responses. No discrimination between uncontaminated milk samples and those contaminated with Ps. fragi was observed. This can be explained by Ps. fragi being a poor fermenter of milk. However, encouraging results were found for the discrimination between the milk samples and those contaminated with E. coli.This revised version was published online in November 2005 with corrections to the Cover Date.     

Efficient Photoelectrochemical Energy Conversion using Spinach Photosystem II (PSII) in Lipid Multilayer Films

The need for clean, renewable energy has fostered research into photovoltaic alternatives to silicon solar cells. Pigment–protein complexes in green plants convert light energy into chemical potential using redox processes that produce molecular oxygen. Here, we report the first use of spinach protein photosystem II (PSII) core complex in lipid films in photoelectrochemical devices. Photocurrents were generated from PSII in a ∼2 μm biomimetic dimyristoylphosphatidylcholine (DMPC) film on a pyrolytic graphite (PG) anode with PSII embedded in multiple lipid bilayers. The photocurrent was ∼20 μA cm⁻² under light intensity 40 mW cm⁻². The PSII–DMPC anode was used in a photobiofuel cell with a platinum black mesh cathode in perchloric acid solution to give an output voltage of 0.6 V and a maximum output power of 14 μW cm⁻². Part of this large output is related to a five-unit anode–cathode pH gradient. With catholytes at higher pH or no perchlorate, or using an MnO₂ oxygen-reduction cathode, the power output was smaller. The results described raise the possibility of using PSII–DMPC films in small portable power conversion devices.     

Biochemical characterization of malate synthase G of P. aeruginosa

Background  

Malate synthase catalyzes the second step of the glyoxylate bypass, the condensation of acetyl coenzyme A and glyoxylate to form malate and coenzyme A (CoA). In several microorganisms, the glyoxylate bypass is of general importance to microbial pathogenesis. The predicted malate synthase G of Pseudomonas aeruginosa has also been implicated in virulence of this opportunistic pathogen.     

Substituent effects in ethene/styrene copolymerization: Dormant state destabilization?

Homogeneous metallocene and CGC catalyzed copolymerizations of ethene (E) and various substituted styrenes are examined. It is found that those with p‐tert‐butylstyrene (TBS) occur with dramatically higher degrees of incorporation and overall productivity than those observed under the same conditions with styrene. It is argued that that the σ‐donating effect of the tert‐butyl substituent is responsible for this performance, effecting a destabilization of an otherwise dormant benzylic species following 2,1‐insertion of the styrene. It was found possible to produce what is essentially TBS‐alt‐E (44% TBS with no sequential TBS units) using a standard constrained geometry catalyst at impressively high productivity [1.5 × 10⁶ g/(mol_Ti.bar_E.h)] and unusually low concentration of TBS (0.7 M). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3111–3117, 2009