Novel disposable bismuth-sputtered electrodes for the determination of trace metals by stripping voltammetry

This work describes a novel type of bismuth electrode for stripping voltammetry based on coating a silicon substrate with a thin bismuth film by means of sputtering. The bismuth-based sensors were characterized by optical methods (scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD)) and as well as by linear sweep voltammetry. Subsequently, the electrodes were tested for the detection of low concentrations of trace metals (Cd(II), Pb(II) and Ni(II)) by stripping voltammetry. Well-formed stripping peaks were observed for trace concentrations of the target analytes demonstrating “proof-of-principle” for these sensors. This type of electrochemical device, utilizing thin-film technology for the formation of the bismuth film, holds promise for future applications in trace metal analysis.     

Space-time encoding for high frame rate ultrasound imaging

Frame rate in ultrasound imaging can be dramatically increased by using sparse synthetic transmit aperture (STA) beamforming techniques. The two main drawbacks of the method are the low signal-to-noise ratio (SNR) and the motion artifacts, that degrade the image quality. In this paper we propose a spatio-temporal encoding for STA imaging based on simultaneous transmission of two quasi-orthogonal tapered linear FM signals. The excitation signals are an up- and a down-chirp with frequency division and a cross-talk of -55 dB. The received signals are first cross-correlated with the appropriate code, then spatially decoded and finally beamformed for each code, yielding two images per emission. The spatial encoding is a Hadamard encoding previously suggested by Chiao et al. [in: Proceedings of the IEEE Ultrasonics Symposium, 1997, p. 1679]. The Hadamard matrix has half the size of the transmit element groups, due to the orthogonality of the temporal encoded wavefronts. Thus, with this method, the frame rate is doubled compared to previous systems. Another advantage is the utilization of temporal codes which are more robust to attenuation. With the proposed technique it is possible to obtain images dynamically focused in both transmit and receive with only two firings. This reduces the problem of motion artifacts. The method has been tested with extensive simulations using Field II. Resolution and SNR are compared with uncoded STA imaging and conventional phased-array imaging. The range resolution remains the same for coded STA imaging with four emissions and is slightly degraded for STA imaging with two emissions due to the -55 dB cross-talk between the signals. The additional proposed temporal encoding adds more than 15 dB on the SNR gain, yielding a SNR at the same order as in phased-array imaging.     

Novel disposable microfabricated antimony-film electrodes for adsorptive stripping analysis of trace Ni(II)

This work describes a novel type of antimony electrode for adsorptive stripping voltammetry (AdSV). The electrode was microfabricated by coating a silicon chip with a thin antimony-film by means of sputtering and the active area of the electrode was defined by photolithography. The resulting antimony-film electrodes (SbFEs) were characterized by optical and electrochemical techniques. The sensors were tested for the detection of low concentrations of Ni(II) by AdSV in the presence of dimethylglyoxime. Well-formed stripping peaks and a linear dependence of the stripping peak current on the Ni(II) concentration were observed on the microfabricated SbFEs while comparative measurements attempted with electroplated SbFEs were unsuccessful. Utilizing thin-film technology for the formation of the antimony-film extends the scope of these devices as mercury-free sensors in AdSV.     

High density digital recording on 4 mm metal particle and Ba-ferrite tapes

In this study we compare the recording performance of 4 mm metal particle (MP) and Ba-ferrite (BF) tapes using helical scan digital audio tape (DAT) mechanisms and heads. At low bit densities the MP tapes have higher output signal and SNR compared with the BF tapes, but at high bit densities the reverse is true. This superior recording performance of the BF tapes, along with their immunity to environmental corrosion, recommends them as the media of choice for 4 mm data recording applications.     

Double-layer particulate magnetic recording media

Double-layer media employ two layers with different magnetic characteristics, with the objective of optimizing performance and/or reducing the overall cost. The idea has recently been applied to longitudinally oriented thin top layers of Ba-ferrite (BF) or metal particle (MP) coated over thicker Co-iron oxide (CoFe) or non-magnetic (NM) underlayers resulting in significantly improved recording performance for high recording density video, digital audio and data applications.     

Oxidation behaviour of SiC coatings

Amorphous silicon carbide (SiC) films were deposited on silicon substrates by radio-frequency magnetron sputtering. The films were oxidized in air in the temperature range 400–900 °C and for times from 1 to 16 h. Neutron reflectivity measurements provided information on the thickness, density and roughness of the SiC and on the formed SiO₂ layers. Fourier transform infrared spectroscopy was used to determine the bond structure of the formed SiO₂ and changes in the bonding of SiC after exposure at the oxidation temperature. The surface morphology of the oxidized films was characterized by atomic force microscopy measurements. The oxidation kinetics is initially fast and as the SiO₂ layer is formed it slows down. The SiC consumption varies linearly with time at all oxidation temperatures. Exposure of the SiC at the oxidation temperature affects its density and to some degree its bond structure, while the formed SiO₂ has density and bond structure as that formed by oxidation of Si under the same conditions. PACS  66.30.Ny; 68.47.Gh; 68.55.J-     

Disposable mercury-free cell-on-a-chip devices with integrated microfabricated electrodes for the determination of trace nickel(II) by adsorptive stripping voltammetry

This work reports the fabrication of disposable three-electrode cells with integrated sputtered metal-film electrodes. The working electrode was a bismuth-film electrode (BiFE) while the reference and counter electrodes were made of Ag and Pt, respectively. The deposition of the metal layers was carried out by sputtering of the respective metals on a silicon substrate while the exact geometry of the electrodes was defined via a metal mask placed on the substrate during the deposition process. Initially, the electrodes were characterised by cyclic voltammetry. The utility of these devices was tested for the trace determination of Ni(II) by square wave adsorptive stripping voltammetry (SWAdSV) after complexation with dimethylglyoxime (DMG). The experimental variables (the presence of oxygen, the DMG concentration, the preconcentration potential, the accumulation time and the SW parameters), as well as potential interferences, were investigated. Using the selected conditions, the 3sigma limit of detection was 100 ng L(-1) for Ni(II) (for 90 s of preconcentration) and the relative standard deviation for Ni(II) was 2.3% at the 10 microg L(-1) level (n=8). Finally, the method was applied to the determination of Ni(II) in a certified river water sample.     

Extremely narrow switching fields in oriented Ba-ferrite particulate media

Oriented particulate Ba-ferrite (BF) media have been known to exhibit very narrow switching field distributions, due to a confluence of reasons based on the particle morphology and the direction of their magnetic anistropy. In this study we report on extremely narrow switching fields observed in longitudinally oriented BF rigid disk coatings, which are primarily the result of strong positive magnetostatic interactions between adjacent platelets in the oriented assemblies. In the transverse direction, the interactions are negative, and the switching fields are large.     

Exchange bias and negative magnetoresistance in [Co/Bi/Co]/IrMn thin films]

The artificial control of grain-boundary resistance and its contribution to magnetic and magneto-transport properties in [Co(3 nm)/Bi(2.5 nm)/Co(3 nm)]Ir₂₀Mn₈₀(12 nm) thin films that exhibit exchange bias is studied. Transverse magnetoresistance (MR) loops exhibit a negative MR in thin films grown by magnetron sputtering on Si/SiN_x(100 nm) substrates. This negative MR effect is of the giant-MR (GMR) type, although its magnitude is less than 1%. A considerable exchange bias (EB) effect is observed only at lower temperatures, where both, GMR and isothermal magnetization loops exhibit a shift of −600 Oe at 5 K.     

Single-shot acquisition of time-resolved fluorescence spectra using a multiple delay optical fiber bundle

We present a technique for simultaneous acquisition of time-resolved fluorescence spectra using a customized optical fiber bundle with multiple collection fibers of different length. These fibers were aligned at the output plane of a spectrograph corresponding to different wavelengths. Fluorescence signal dispersed by the spectrograph was converted into a pulse train owing to time delays introduced by the length differences between each fiber and subsequently detected by a photomultiplier and digitizer. The performance of the technique was tested with standard fluorescent dyes, and the results are in good agreement with literature values.