Investigation of Raman,FT-IR,EPR spectra and antimicrobial activity of 2-(5-H/Me/Cl-1<Emphasis Type="BoldItalic">H</Emphasis>-benzimidazol-2-yl)-phenol ligands and their Fe(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> complexes

2-(5-H/Me/Cl-1H-benzimidazol-2-yl)-phenol ligands form 1:1 electrolytes, 5-coordinate monometallic complexes with iron(III) nitrate. The geometry of the [Fe(L)(OH)(H₂O)₂](NO₃) complexes was derived from theoretical calculation in DGauss/DFT level (DZVP basis set) on CACHE. In all of the complexes the ligands are bidentate, via one imine nitrogen atom and phenolate oxygen atom. The coordination is completed with a hydroxide ion, and two water molecules, adopting a distorted square pyramidal geometry. The structures of the compounds were confirmed on the basis of elemental analysis, molar conductivity, magnetic moment, FT-Raman, FT-IR (mid-IR, far-IR), EPR and u.v.–vis. The antimicrobial activities of the free ligands, their hydrochloride salts, and the complexes were evaluated using the disk diffusion method in dimethyl sulfoxide (DMSO) as well as the minimal inhibitory concentration (MIC) dilution method, against nine bacteria and the results are compared with several known antibiotic agents. Antifungal activities were reported for Candida albicans, Kluyveromyces fragilis, Rhodotorula rubra, Debaryomyces hansenii, Hanseniaspora guilliermondii, and the results were referenced against nystatin, ketaconazole, and clotrimazole antifungal agents. In most cases, the compounds tested showed broad-spectrum (Gram⁺ & Gram⁻ bacteria) activities that were either more active or as potent as the references.     

Switching from linear to cyclic δ‐Polyvalerolactone synthesized via zeolitic imidazolate framework as a catalyst: A promising approach

A series of spray dried zeolitic imidazolate frameworks (ZIFs = ZIF‐8, ZIF‐67, and Zn/Co‐ZIF) are used as a catalyst for the bulk ring‐opening polymerization of δ‐valerolactone without any co‐catalyst to generate polyvalerolactone. Interestingly, using the same catalyst under the same reaction conditions could manipulate the structure of the product polymer, and thus its physical properties. Thus, using a dried substrate leads to the formation of the cyclic polymer while a linear polymer was formed on using the commercially available substrate. An activated monomer mechanism has been suggested where the propagating zinc alkoxide undergoes an intramolecular transesterification to release cyclic or linear polyvalerolactone. The ROP of δ‐VL without drying shows that the polymeric zwitterions have little tendency to cyclize in the presence of moisture. At 140 °C, ZIF‐8 shows a superior catalytic activity resulting in the production of cyclic polyvalerolactone having a high molecular weight as compared to ZIF‐67 or Zn/Co‐ZIF due to the presence of highly active sites. The catalyst could be recycled and reused without any significant loss of catalytic activity.     

Lanthanum immobilized on chitosan: a highly efficient heterogeneous catalyst for facile synthesis of novel (α,β‐unsaturated) β‐aminoketones

A new heterogeneous catalyst, lanthanum immobilized on chitosan, was synthesized and used for the aza‐Michael reaction of β‐enaminone under microwave irradiation. The characteristic structural features of the catalyst were determined using Fourier transform infrared spectroscopy, powder X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, transmission and scanning electron microscopies and inductively coupled plasma atomic emission spectroscopy. The stability of the catalyst was evaluated using thermogravimetric analysis. The use of recyclable catalyst and glycerol as solvent makes this procedure environmentally benign and economically viable. Copyright © 2016 John Wiley & Sons, Ltd.     

Xanthan sulfuric acid: An efficient and biodegradable solid acid catalyst for the synthesis of bis(indolyl)methanes under solvent-free conditions

Xanthan sulfuric acid (XSA) is found to be an efficient catalyst for the electrophilic substitution reaction of indole with aromatic aldehydes to afford the corresponding bis(indolyl)methanes at room temperature under solvent-free conditions. The catalyst was characterized for the first time with the help of powder XRD, SEM–EDX and DSC–TGA. The attractive features of this green, new methodology are excellent yield of products, clean reaction profile, reusability of the catalyst, energy sustainable protocol, simple experimental and easier work-up procedures.     

Synthesis and Antimicrobial Activity of Some Novel 7-Chloro-4-aminoquinoline Derivatives

Russian Journal of General Chemistry - A number of novel 7-chloro-4-aminoquinoline derivatives have been efficiently synthesized by nucleophilic aromatic substitution reaction of...     

Dosimetric characteristics of aqueous solution of crystal violet for applications in food irradiation

Aqueous solution of crystal violet has been evaluated spectrophotometrically as a gamma-ray chemical dosimeter. The response of the chemical dosimetric system has also been investigated under different environmental conditions, such as light and temperature. In the present study the response has been measured at two wavelengths; 588 nm (λ_max of the irradiated solution) and 500 nm. The response of the crystal violet dosimeter was linear in the dose range of 50–550 Gy at pH 5.6 when absorption measurements were made at 588 and 500 nm. The response of the crystal violet dosimeter during post-irradiation storage at room temperature in dark showed slight decrease in absorbance at 588 and 510 nm but the response was almost stable at 460 nm. For higher doses, the change in the response was greater as compared to the low doses. Post-irradiation stability during diffused sunlight showed significant decrease in the response for higher dose at 588 and 510 nm and slower decrease in the response for lower dose at the above mentioned wavelengths. However the response was almost stable up to 97 days at 460 nm for higher and lower doses. At 4 °C, the decrease in the absorbance was slower at 588 and 510 nm while the response was almost constant at 460 nm. At higher temperatures, such as 40 °C, the decrease in the absorbance was greater at 588 and 510 nm while at 460 nm the absorbance was almost constant for about 3 months.     

On the Constant Metric Dimension of Generalized Petersen Graphs P（n, 4）

In this paper,we consider the family of generalized Petersen graphs P(n,4).We prove that the metric dimension of P(n,4) is 3 when n ≡ 0(mod 4),and is 4 when n = 4k + 3(k is even).For n ≡ 1,2(mod 4) and n = 4k + 3(k is odd),we prove that the metric dimension of P(n,4) is bounded above by 4.This shows that each graph of the family of generalized Petersen graphs P(n,4)has constant metric dimension.     

Urea dimethacrylates functionalized with bisphosphonate/bisphosphonic acid for improved dental materials

Incorporation of bisphosphonate/bisphosphonic acid groups in dental monomer structures should increase interaction of these monomers with dental tissue as these groups have strong affinity for hydroxyapatite. Therefore, new urea dimethacrylates functionalized with bisphosphonate (1a, 1b) and bisphosphonic acid (2a, 2b) groups are synthesized and evaluated for dental applications. Monomers 1a and 1b are synthesized from 2‐isocyanatoethyl methacrylate (IEM) and two bisphosphonated amines (BPA1 and BPA2), prepared as reported elsewhere. Selective dealkylation of the bisphosphonate ester groups of 1a and 1b using trimethylsilyl bromide (TMSBr) gives monomers (2a and 2b) with bisphosphonic acid functionality. X‐ray diffractometer (XRD), Raman spectroscopy, and X‐ray photoelectron spectroscopy (XPS) analyses of monomer‐treated HAP particles show that 2a induces formation of stable monomer‐calcium salts, similar to 10‐methacryloyloxydecyl dihydrogen phosphate (MDP), with higher chemical interaction than 2b. The photopolymerization studies indicate good copolymerizability with commercial dental monomers. In vitro studies on NIH 3T3 mouse embryonic fibroblast cells have clearly shown that the tested monomers (1b and 2b) are not toxic according to the MTT standards. All these properties make these monomers suitable as biocompatible cross‐linkers/adhesives for dental applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3195–3204     

Specific Deuteration in Patuletin and Related Flavonoids via Keto–Enol Tautomerism: Solvent‐ and Temperature‐Dependent 1H‐NMR Studies

An H/D exchange process in patuletin ( 1 ) and its derivatives in D‐donor solvents (e.g., CF₃COOD), which occurs regioselectively at C(8) was observed for the first time during NMR studies. The effect of substituents and temperature on the deuteration of various flavonoids (see Fig. 1) which include apigenin, chrysin, galangin, kaempferol, luteolin, morin, myricetin, patuletin, patulitrin, and quercetin, as well as derivatives of patuletin was examined extensively under NMR conditions. The rate constant of deuteration at C(8) of patuletin ( 1 ) and two flavones, luteolin ( 3 ) and apigenin ( 12 ), was also determined in CF₃COOD. The D‐atom was introduced into the flavonoids via a keto–enol tautomerism (Scheme 1). During these studies, monodeuterated patuletin was also obtained as a new compound. The examined flavonoids have been reported to possess significant pharmacological activities, and their deuterated derivatives would be of importance for the identification and quantification of these compounds in biological matrices.