用于机械振动实时监测的光纤光栅有源传感装置

把一对中心反射波长分别为1562.11nm和1562.71nm的光纤光栅粘贴在均质、等厚、等腰三角形悬臂梁上下表面作为环形腔光纤激光器端镜，当机械振动激励自由端时，通过观测激光输出脉冲，地施加于自由端的机械振动的频率进行了实时监测；观察两光栅波长漂移量差值的变化，可在0～6.1mm的范围内判断所测振动的振幅。低于100Hz时，实验结果与实际值基本吻合。     

Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

A Multidimensional Branch-and-Prune Method for Interval Global Optimization

In this paper a new multidimensional extension of the recently developed one-dimensional enclosure method called kite is given for interval global optimization. A more sophisticated version of the pruning technique based on the kite method is introduced. By the new componentwise approach all the one-dimensional theoretical results and procedures can be used in the higher-dimensional case. The possibilities in the implementation of the new algorithm together with numerical results on 40 standard test problems are presented.     

Traveling Wave Solutions for a Combustion Problem

A simple model for combustion consisting of two parabolic equations is considered. It is shown that plane wave solutions exist. Certain invariant integrals are obtained, from which a nonexistence criterion is derived. The effect of the wave speed on the shape of the wave is deduced.     

Limits of parallelism in explicit ODE methods

Numerical methods for ordinary initial value problems that do not depend on special properties of the system are usually found in the class of linear multistage multivalue methods, first formulated by J.C. Butcher. Among these the explicit methods are easiest to implement. For these reasons there has been considerable research activity devoted to generating methods of this class which utilize independent function evaluations that can be performed in parallel. Each such group of concurrent function evaluations can be regarded as a stage of the method. However, it turns out that parallelism affords only limited opportunity for reducing the computing time with such methods. This is most evident for the simple linear homogeneous constant-coefficient test problem, whose solution is essentially a matter of approximating the exponential by an algebraic function. For a given number of stages and a given number of saved values, parallelism offers a somewhat enlarged set of algebraic functions from which to choose. However, there is absolutely no benefit in having the degree of parallelism (number of processors) exceed the number of saved values of the method. Thus, in particular, parallel one-step methods offer no speedup over serial one-step methods for the standard linear test problem. Although the implication of this result for general nonlinear problems is unclear, there are indications that dramatic speedups are not possible in general. Also given are some results relevant to the construction of methods.Work supported in part by National Science Foundation grants DMS 89 11410 and DMS 90 15533 and by US Department of Energy grant DOE DEFG02-87ER25026. Work of the second author was completed while at the University of Illinois.     

Structure and catalytic activity of some soluble polyethylene glycol-peptide conjugates

Soluble catalysts for the Juliá-Colonna asymmetric epoxidation reaction have been constructed in three different ways, using NH₂-PEG-OMe as the support system: suitable solvents have been identified and it is shown that the degree of helicity of the conjugates correlates with the extent of conversion and (to a lesser extent) the enantioselectivity of epoxidation.     

Mimicking catalase and catecholase enzymes by copper(II)-containing complexes

An imidazolate-bridged copper(II)-zinc(II) complex (Cu(II)-diethylenetriamino-μ-imidazolato-Zn(II)-tris(2-aminoethyl)amine perchlorate (denoted as “Cu,Zn complex”) and a simple copper(II) complex (Cu(II)-tris(2-aminoethyl) amine chloride (“Cu-tren”) were prepared and immobilised on silica gel (by hydrogen or covalent bonds) and montmorillonite (by ion exchange). The immobilised substances were characterised by FT-IR spectroscopy and their thermal characteristics were also studied. The obtained materials were tested in two probe reactions: catalytic oxidation of 3,5-di-tert-butyl catechol (DTBC) (catecholase activity) and the decomposition of hydrogen peroxide (catalase activity). It was found that the catecholase activity of the Cu,Zn complex increased considerably upon immobilization on silica gel via hydrogen bonds and intercalation by ion exchange among the layers of montmorillonite. The imidazolate-bridged copper(II)-zinc(II) complex and its immobilised versions were inactive in hydrogen peroxide decomposition. The Cu(II)-tris(2-aminoethyl)amine chloride complex displayed good catalase activity; however, immobilisation could not improve it.     

Rh complexes of 1-(2,4,6-triisopropylphenyl-)3-methyl-1H-phosphole: preparation and use as catalysts in the hydroformylation of styrene

In the series of 1-(2,4,6-trialkylphenyl-)3-methyl-1H-phospholes (1a–c) that are to a certain extent of aromaticity, only the isopropyl substituted one (1a) entered into reaction with dimeric (pentamethylcyclopentadienyl)rhodium dichloride to afford Rh(III) complex (2a) in a reversible manner. After a careful workup, (2a) could be prepared and characterized whose stereostructure was elucidated by B3LYP/3–21G*, B3LYP/6–31G* and LANL2DZ calculations. Complex (2a) as a preformed catalyst, as well as the Rh(acac)(CO)₂ + 2(1a) in situ catalytic system were useful in the hydroformylation of styrene and gave the branched aldehyde in regioselectivities of 65–96%.     

Adducts of Rh2[MTPA]4 with some phosphine chalcogenides: nature of binding and ligand exchange

Adducts of four phosphine chalcogenides with the chiral dirhodium complex ([Rh-Rh]) were investigated by variable-temperature 1H and 31P NMR spectroscopy in order to compare their properties as axial ligands. Whereas the selenide (1) and the sulfide (2) are strong ligands with electrostatic attraction and, in addition, a significant orbital (HOMO-LUMO) interaction, the phosphine oxide compounds (P=O) bind primarily via electrostatic attraction and are relatively weak donors. Moreover, the overall bond strength in these adducts depends on steric congestion around the P=O group.