Influence of the characteristics of soil and fly ash on the supercritical carbon dioxide extraction of dioxins.

Several investigations on the extraction of dioxins from soil and fly ash with supercritical fluid have been reported; however, few of them describe the influence of components on the extraction. We extracted dioxins from eight samples with different values of organic carbon content and surface area with supercritical CO(2) at a temperature of 463 K, a pressure of 40 MPa, and using 10% toluene as an entrainer. We researched the influence of the characteristics of soil and fly ash on supercritical CO(2) extraction of dioxins. The results revealed that the extraction efficiencies of PCDD/DFs and PCBs were high for all soil samples, while that of fly ash samples decreased with the increase in organic carbon content and surface area. The extraction efficiencies of dioxins from four standard samples, activated carbon, humic acid, alumina, and florisil, were also examined. The results revealed that the extraction efficiencies were strongly influenced by activated carbon like components present in the samples.     

Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Ion-pair formation of a copper(II)-ammine complex with an anionic surfactant and the recovery of copper(II) from ammonia medium by the surfactant-gel extraction method.

The extraction and separation of copper(II), zinc(II), cobalt(II), and cadmium(II) were investigated. Both copper(II) and zinc(II) formed ammine-complexes, while cadmium(II) and cobalt(II) formed hydroxide precipitates in an ammonia medium. By the addition of sodium dodecylsulfate (SDS), a copper(II) complex formed an ion-pair (copper-ammine-DS), which was extracted into the SDS phase. However, a zinc(II) complex did not form an ion-pair, and was soluble in water. Copper(II) ion was recovered by stripping (back-extraction) after the addition of hydrochloric acid. This method was applied to the separation of copper(II) in a brass alloy.     

On a resolvent estimate of the Stokes equation with Neumann–Dirichlet‐type boundary condition on an infinite layer

This paper is concerned with the standard Lp estimate of solutions to the resolvent problem for the Stokes operator on an infinite layer with ‘Neumann–Dirichlet‐type’ boundary condition. Copyright © 2004 John Wiley & Sons, Ltd.     

The monomial ideal of a finite meet-semilattice

Squarefree monomial ideals arising from finite meet-semilattices and their free resolutions are studied. For the squarefree monomial ideals corresponding to poset ideals in a distributive lattice, the Alexander dual is computed.

     

Rotation of a Fine Particle with Circularly Polarized Anti-Parallel Collinear Laser Beams

We have succeeded in the operation of rotating a fine particle which was held without mechanical contact by circularly polarized laser beams with opposite propagation directions. A polystyrene latex particle 11.9 μm in diameter deformed in a disk-like shape was dispersed in water, and was trapped using the anti-parallel collinear laser beams which were set up so that they had the circular polarization rotating in the same direction. It was observed that the trapped particle rotated in the same direction as the rotation of the circular polarization of light. Inversion of the rotational direction of the circular polarization of light reversed the direction of the rotation of the particle. Although the rotational speed of a particle varied significantly from particle to particle, it was found to be proportional to the laser beam intensity. A typical value for the rotational speed per beam intensity was 2.1 Hz/W.     

Acoustic characteristics of Ni–Nb–Zr–H glassy alloys by ultrasonic shear waves

The propagation characteristics of shear horizontally polarized (SH) waves passing through (Ni₄₂Nb₂₈Zr₃₀)_100–x H_x (x = 0–15.2) glassy alloys were investigated as a function of hydrogen content. With an increase in hydrogen content, the propagation time and main frequency of the receiving waves show increase and decrease, respectively, indicating expan‐ sion in average atomic distance which comes from solution of hydrogen. In sharp contrast to crystalline alloys, the decrease in damping ratio and the delay in phase with increasing hydrogen suggest a strong settlement of hydrogen into four‐coordination sites surrounded tetrahedrally by four Zr atoms and the resulting increase in dynamic elasticity, respectively. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Limonene concentration in lemon (Citrus volkameriana) peel oil as a function of ripeness

The dependence of the limonene content of lemon (Citrus volkameriana) peel oil on the degree of ripeness of the fruit has been studied by using steam distillation and cold pressing to extract the oils from lemon fruit peel at different stages of maturation (green, greenish-yellow, and yellow-orange peel coloration). Samples of essential oils were analyzed by high resolution GC and GC-MS, using tetradecane as internal standard for quantitation. Forty components were detected; thirty eight were positively identified by comparison of their mass spectra (El, 70 eV) and Kováts retention indexes (determined using a non-logarithmic scale on capillary columns coated with both polar (DB-Wax) and non-polar (DB-1) stationary phases) with those of standards and with data reported in the literature. The limonene concentration reached a maximum level of 79.4% when the fruit was in the intermediate maturation stage characterized by greenish-yellow coloration.