Syntheses and antitumor activities of N6,N6-dimethyladenosine carboxylate analogues

Several analogues substituted with fatty acid at the 2'-, 3'-, or 5'-position of the ribose moiety of N6,N6-dimethyladenosine were synthesized and tested for antitumor activity against cultured cells of L1210 leukemia and/or Ehrlich ascites. The cytotoxicity and increase of life span obtained with congeners in the N6,N6-dimethyladenosine 3'- or 5'-substituted series were comparable to in vitro or several times better in vivo than those of the mother compound.     

Spectrophotometric determination of traces of hydrogen peroxide with the Ti(IV)-xylenol orange and the Ti(IV)-chromazurol S reagents

The formation of mixed ligand complexes in Ti(IV)-xylenol orange (XO)-H₂O₂ and Ti(IV)-chromazurol S (CAS)-H₂O₂ systems was studied by spectrophotometry. The former system gave constant absorbance (λ_max = 562 nm) under the condition of [XO]/[Ti(IV)] = 1 in the pH 2–4 region. In the latter system, a distinct maximum at 557 nm was observed when [CAS]/[Ti(IV)] = 4 in the pH range of 4.5–5.2. In both cases, the absorbance at λ_max was stable for a long time and proportional to the concentration of hydrogen peroxide. From those facts, the usefulness of the mixtures of Ti(IV)-XO and Ti(IV)-CAS as the colorimetric reagents for the determination of hydrogen peroxide can be expected. The conditions for the use of the Ti(IV)-XO and the Ti(IV)-CAS reagents were examined in detail, and both reagents were found to be available for trace analysis of hydrogen peroxide with high sensitivity.     

Effects of poly(ethylene glycol) (PEG) concentration on the permeability of PEG-grafted liposomes

Poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were prepared from dipalmitoylphosphatidylcholine (DPPC) with various amounts of distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) with PEG molecular weights of 1000, 2000, 3000 and 5000. The effects of DSPE-PEG concentration on the permeability of PEG-liposomes were investigated using carboxyfluorescein (CF). In the gel state, the CF leakage from PEG-liposomes was decreased with increasing mole fractions of DSPE-PEG for all PEG molecular weights. In the liquid-crystalline state, the CF leakage from PEG-liposomes containing DSPE-PEG1000 gradually increased with increasing mole fractions of DSPE-PEG, while that of PEG-liposomes whose molecular weight in PEG units was above 2000 rapidly decreased by the addition of DSPE-PEG. Furthermore, no effect of PEG molecular weight on CF leakage was observed. The relationship between the fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) (or 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene (TMA-DPH)) and the mole fraction of DSPE-PEG for PEG-liposomes was also investigated. No significant changes in fluorescence polarization of DPH for liposomal bilayer membranes was observed in the gel and liquid-crystalline states due to the addition of DSPE-PEG, while that of TMA-DPH was decreased compared with that of liposomes without DSPE-PEG in both states.     

Factors affecting physicochemical properties of liposomes prepared with hydrogenated purified egg yolk lecithins by the microencapsulation vesicle method

We examined hydrogenated purified egg yolk lecithins, having practical advantages over non-hydrogenated ones, as liposomal membrane materials. Liposomes were prepared by the microencapsulation vesicle (MCV) method in which liposomes are formed through two-step emulsification and dispersion. Three types of purified egg yolk lecithins with different iodine values were examined after being dissolved in one of three lipid solvents. The liposome size increased as the temperature during the second emulsification increased, being closer to the boiling temperature of the solvent. The preparation temperature in relation to the transition temperature of each lecithin was also a factor affecting liposome sizes. As for the encapsulation efficiencies of the model compound calcein in liposomes, they differed mainly depending on the solubility of each lecithin in a lipid solvent and it was more obvious in hydrogenated lecithins. A high preparation temperature resulted in lower encapsulation efficiencies, suggesting that leakage of encapsulated calcein was facilitated at high temperature in the MCV methods. There was a significant correlation between liposome sizes and encapsulation efficiencies in non-hydrogenated purified egg yolk lecithin but not in hydrogenated ones. When using hydrogenated purified egg yolk lecithins as liposomal membrane materials, it was suggested that a lipid solvent should be chosen so that a lecithin completely dissolves under the preparation condition in order to achieve a higher encapsulation efficiency. Smaller liposome particles were obtained when the second emulsification was performed at a lower temperature compared with the boiling point of the lipid solvent. These findings can be applied to control encapsulation efficiencies and particle sizes in each particular liposome preparation enclosing therapeutic agents.     

Soluble polymer-supported catalysts containing pendant quaternary onium salts for the addition reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 15a-d ) with carbon dioxide (CO₂) was carried out using 1 mol % of soluble polymer-supported quaternary onium salts as catalysts under atmospheric pressure. The reaction of 15a-d with CO₂ proceeded very smoothly to give the corresponding five-membered cyclic carbonates ( 16a-d ) in high yields at 90-100°C. The catalytic activity of the soluble polymer-supported quaternary onium salts was strongly affected by the following factors: kind of reaction solvent, degree of introduction of the pendant onium salt residues in the polymer chain, and type of alkyl group on the onium salts due to the balance between lipophilicity and steric hindrance of the onium salt residue. Furthermore, these soluble polymer-supported quaternary onium salts were found ordinarily to have higher catalytic activity than low molecular weight quaternary onium salts under the same reaction conditions. It was also found that the rate of reaction was proportional both to catalyst concentration and to oxirane concentration. © 1995 John Wiley & Sons, Inc.     

522—Catalytic oxydation of biological components on platinum electrodes modified by adsorbed metals: Anodic oxidation of glucose

The catalytic oxidation of glucose on Pt electrodes modified by adsorbed metals was studied in 1 M HClO₄ by linear sweep voltammetry. The adsorbed metals (denoted as M_ad, such as Bi_ad and Pb_ad) formed on Pt in the potential region more positive than the reversible potential of an M⁼⁺/M^o couple, lead to a marked increase in the anodic c?urrent of glucose by about one order of magnitude. The catalytic activity depends on the surface coverage by the M_ad. The strongly adsorbed species of lactone type, which are responsible for blocking the successive oxidation, are formed on the electrode surface in the anodic processes of glucose on a bare Pt electrode. The formation of such poisonous species is accelerated in the presence of adsorbed hydrogen on Pt. The effects of M_ad were discussed on the basis that M_ad plays its major role on the Pt electrode surface in removal of the adsorbed hydrogen which initiates the formation of the poisonous species.     

Catalytic effects of metal submonolayers formed by faradaic adsorption on the anodic oxidation of ascorbic acid at a platinum electrode

The catalytic effects of metal ions on the anodic oxidation of ascorbic acid on a Pt electrode in 1 M HClO₄ were studied by linear sweep voltammetry. The anodic peak due to a two-electron oxidation of ascorbic acid shifts to the negative potential side on the addition of Bi³⁺. This indicates the accelerating effect of Bi³⁺ on the oxidation of ascorbic acid. The presence of other metal ions, such as Pb²⁺, Hg²⁺, Tl⁺, Ag⁺ and Sb³⁺, also exerts similar effects. These metal ions were adsorbed on a Pt electrode at underpotentials and the adsorbed metals (denoted as M_ad) still remain on the electrode surface until the electrode potential goes up to and beyond the peak potential of the oxidation of ascorbic acid. On the other hand, metal ions forming no adsorbed layer on Pt, such as Co²⁺, Zn²⁺, Fe³⁺ and Ni²⁺, exhibit no catalytic effect. These facts suggest that the presence of a M_ad on Pt is essential for the promotion of the anodic oxidation of ascorbic acid. However, there is a difference in the catalytic action among the M_ad, for example, Cu_ad, Cd_ad, In_ad, Sn_ad and Mo_ad display no catalytic action.The catalytic activity depends on the degree of surface coverage by the M_ad. The maximal effect of the M_ad is attained in the submonolayer region. The effects of metal ions were discussed on the basis that the M_ad plays its major role in the removal of the adsorbed ascorbic acid occupying active sites on the electrode surface, and provides effective sites for the activation of adjacent water molecules. Furthermore, from the ¹³C NMR spectra for the oxidation products, the adsorbed water on the M_ad appears to function by promoting the subsequent hydration steps, following the electron-transfer step of ascorbic acid.     

Analysis of phenothiazines in human body fluids using disk solid-phase extraction and liquid chromatography

Seven phenothiazine derivatives, perazine, perphenazine, prochlorperazine, propericiazine, thioproperazine, trifluoperazine, and flupentixol, have been found to be extractable from human plasma and urine samples using disk solid-phase extraction (SPE) with an Empore C18 cartridge. Human plasma and urine (1 mL each) containing the 7 phenothiazine derivatives were mixed with 2 mL of 0.1M NaOH and 7 mL distilled water and then poured into the disk SPE cartridges. The drugs were eluted with 1 mL chloroform- acetonitrile (8 + 2) and determined by liquid chromatography with ammonium formate/formic acid-acetonitrile gradient elution. The detection was performed by ultraviolet absorption at 250 nm. The separation of the 7 phenothiazine derivatives from each other and from impurities was generally satisfactory using a SymmetryShield RP8 column (150 x 2.1 mm id, 3.5 microm particle size). The recoveries of the 7 phenothiazine derivatives spiked into plasma and urine samples were 64.0-89.9% and 65.1-92.1%, respectively. Regression equations for the 7 phenothiazine derivatives showed excellent linearity, with detection limits of 0.021-0.30 microg/mL for plasma and 0.017-0.30 microg/mL for urine. The within-day and day-to-day coefficients of variation for both samples were commonly below 9.0 and 14.9%, respectively.