Analysis and parametric sensitivity of the behavior of overshoots in the concentration of a charged adsorbate in the adsorbed phase of charged adsorbent particles: practical implications for separations of charged solutes

In this work, an analysis of the parametric sensitivity of the overshoot in the concentration of the adsorbate in the adsorbed phase, which occurs under certain conditions during an ion-exchange adsorption process, is presented and used to suggest practical implications of the concentration overshoot phenomenon on operational policies and configurations of chromatographic columns and finite bath adsorption systems. The results presented in this work demonstrate and explain how the development of an overshoot in the concentration of the adsorbate in the adsorbed phase could be enhanced or suppressed by (i) varying the diffusion coefficient, D3, of the adsorbate relative to the diffusion coefficients, D1 and D2, of the cations and anions, respectively, of the background/buffer electrolyte, (ii) altering the initial surface charge density, delta0, of the charged adsorbent particles, (iii) varying the Debye length, lambda, and (iv) changing the initial concentration, Cd3(0), of the adsorbate in the bulk liquid of the finite bath. The influence of the pH and ionic strength, Iinfinity, of the liquid solution on the development of an overshoot in the concentration of the adsorbate in the adsorbed phase is also presented and discussed through the relationships of these parameters to delta0 and lambda, respectively. Furthermore, a detailed explanation of the effects of each parameter on the interplay between the diffusive and electrophoretic molar fluxes, as well as on the structure and functioning of the electrical double layer, which are responsible for the concentration overshoot phenomenon, is presented.     

The mechanism of the loss of H2 and H2O from 1,4-cyclohexanediol anion and related compounds

Losses of H₂ and H₂O from the [M-H]^? alkoxide anions of 1,4-cyclohexanediol formed in OH^? negative chemical ionization were studied using synthetic deuterated analogues and labelling by hydrogen-deuterium exchange between neutrals in the ion source prior to ionization. Simple 1,2-H₂ elimination leading to an enolate ion does not occur, but stereospecific mechanisms are shown to give a ketolate intermediate daughter ion. Collisionally activated dissociation spectra of the resulting daughter ions are the same as those of the corresponding ions generated directly from ketols.     

Mechanically responsive films of variable hydrophobicity made of polyelectrolyte multilayers

Mechanically responsive surfaces that allow to switch reversibly from a hydrophobic to a hydrophilic substrate are reported. The surfaces are constituted of polyelectrolyte multilayers deposited on modified charged silicone sheets. n bilayers of poly(allylamine)-Nafion (PAH-Naf) and m bilayers of poly(allylamine)-poly(acrylic acid) (PAH-PAA) composed the multilayers. A (PAH-Naf)(n) film possesses a water contact angle of around 105 degrees, whereas the contact angle of a (PAH-Naf)(4)-(PAH-PAA)(m) multilayer is around 50 degrees. When such a film with m < 5 and terminated by PAA is stretched out, its water contact angle increases up to around 100 degrees. Successive elongation/retraction cycles allow the water contact angle to alternate reversibly between 100 and 57 degrees indicating the reversible mechanical responsive nature of the film.     

Study of peptides containing modified lysine residues by tandem mass spectrometry: precursor ion scanning of hexanal-modified peptides

Upon hexanal-modification in the presence of NaCNBH(3), the oxidized B chain of insulin becomes mono- and further dialkylated on both the N-terminal and Lys(29) residues. A pseudo-MS(3) study was performed with a triple-quadrupole mass spectrometer on the different modified lysine-containing species to gain further insights into the characteristic fragmentation pattern. These fragmentations, in good agreement with true MS(3) measurements obtained using an ion trap mass spectrometer, highlighted characteristic monoalkylated lysine (immonium-NH(3)) and protonated modified caprolactam ions at m/z 168 and 213, respectively. In contrast, no fragment ion derived from a modified lysine residue (immonium or caprolactam) was observed when dialkylation occurs on Lys(29). However, a fragment ion corresponding to a protonated dihexylamine was observed at m/z 186. This loss, characteristic of dialkylated lysine fragmentation, was also observed upon dialkylation of N(alpha)-acetyllysine with either hexanal or pentanal. On the other hand, acetylation and malondialdehyde-modification of the N(alpha)-acetyllysine side chain led mainly to the corresponding modified (immonium-NH(3)) fragment ions at m/z 126 and 138, respectively. Finally, it was demonstrated that precursor ion scanning for both m/z 168 and 213 ions led to specific and sensitive identification of peptides containing hexanal-modified lysine residues within an unfractionated tryptic digest of hexanal-modified apomyoglobin. Thus, Lys(42), Lys(45), Lys(62), Lys(63), Lys(77), Lys(87), Lys(96), Lys(98), Lys(145) and Lys(147) were found to be modified upon reaction with hexanal.     

IsoméRisation avant la perte d'eau des ions aldéhydes et cétones protonés en spectrométrie de masse

Isomerization of Protonated Aldehyde and Ketone Ions in the Mass-Spectrography Before the Loss of Water In mass spectrometry, protonated aldehyde and ketone ions isomerize before the loss of a molecule of water. In order to specify this process, the spectra of deuterium labelled protonated aldehydes and ketones have been compared to the spectra of the corresponding isomer ions.     

Anionic copper complex fragmentations from enkephalins under low-energy collision-induced dissociation in an ion trap mass spectrometer

Peptide metallation with Cu2+ was explored in the negative ESI mode using an ion trap mass spectrometer. Under these conditions, the [(M-3H) + CuII]- species formed were investigated under low-energy collision-induced dissociation conditions. MS2 experiments indicate a very different behavior of CuII metallated complexes compared with [M-H]- species. CuII induces an easy loss of CO2 and specific side-chain cleavages (by radical losses) at the C-terminal residue, as observed previously by prompt 'in source' dissociation experiments. The loss of CO2 yields an unstable carbylide that leads to further dissociations involving the migration of a proton or a hydrogen radical (through the reduction of CuII). Multistage MS3 experiments were carried out to rationalize this behavior. Fragmentation pathways are proposed in order to explain the product ions observed. The side-chain radical loss at the C-terminus was demonstrated to be a consecutive process. Finally, evidence is provided that the specific side-chain cleavages can be used for the differentiation of Leu/Ile and Gln/Lys residues when they are located at the C-terminus. The existence of a zwitterionic form in the case of the anionic YGGFK-CuII complex is proposed.     

Dipping versus spraying: exploring the deposition conditions for speeding up layer-by-layer assembly

Polyelectrolyte film fabrication by successive spraying of polycation and polyanion solutions is described and compared to classic dipping. The poly(styrenesulfonate)/poly(allylamine) system is examined in detail. The influence of various parameters such as spraying time, polyelectrolyte concentration, and effect of film drying during multilayer construction is investigated. It is found that film deposition by spraying is easily controlled and very reliable. The thickness of the multilayers grows linearly with the number of deposition cycles similarly to what is observed when dipping substrates or when polyelectrolyte solutions flow over a surface. The assembly of films is very fast and leads to films with small surface roughness as estimated by atomic force microscopy and X-ray reflectometry. Spray deposition allows achieving regular multilayer growth even under conditions for which dipping fails to produce homogeneous films (e.g., extremely short contact times). Moreover, because drainage constantly removes a certain quantity of the excess material arriving at the surface, one can even skip the rinsing step and, thus, speed up even further the whole buildup process.     

Investigation of the reactivity of arylamines, organo-hydrazines and tolylisocyanate towards [PW12-xMxO40]n- Keggin anions

Reaction of K7[A,alpha-PW9Mo2O39] with Na2MoO4.2H2O in a mixture of water/dioxane/hydrochloric acid and further precipitation with (Bu4N)Br provided (Bu4N)3[A,alpha-PW9Mo3O40](3). Analogous reaction with K7-xNax[alpha-PW11O39] is an alternative to the synthesis of (Bu4N)3[alpha-PW11O39{MoVIO}]2. Multinuclear NMR and ESI mass spectrometry have been used to interpret the reaction of (Bu4N)x[alpha-PW11O39{ReO}](x=3 1; x=4 1I), (Bu4N)x[alpha-PW11O39{MoO}](x=3 2; x=4 2I) and (Bu4N)3[A,alpha-PW9Mo3O40]3 by organohydrazines, arylamines, tolylisocyanate and tetraphenylphosphine imide.     

GC-MS and GC-MS-MS analysis of a complex essential oil

Summary The alcoholic portion of avetiver oil (Bourbon), the gas chromatogram of which shows more than 100 components, was analyzed by combined GC-MS with different ionization methods. This enabled us to identify major components. The specificity of the method was improved by using combined gas chromatography-tandem mass spectrometry in the collision-activated-dissociation mode.     

Proton affinity of proline and modified prolines using the kinetic method: role of the conformation investigated by ab initio calculations

The proton affinities of proline, cis-3-methylproline and cis-3-ethylproline have been measured by the kinetic method using an ion trap instrument; the values obtained are 936, 940.5, and 943 kJ mol(-1), respectively. The experimental values are consistent with those obtained by high-level ab initio calculations (B3LYP/6-31+G*//B3LYP/6-31G* and B3P86/6-31+G*//B3LYP/6-31G*). Several conformations of neutral and protonated proline were considered, in particular the endo and exo ring structure and the position of the carboxyl group. These results show the importance of the position of the hydrogen atom of the carboxyl group in determining the most stable protonated proline structure.