Stability of the gold/silica thin film interface: electrochemical and surface plasmon resonance studies

This article reports chemical stability studies of a gold film electrode coated with thin silicon oxide (SiOx) layers using electrochemical, surface plasmon resonance (SPR) and atomic force microscopy (AFM) techniques. Silica films with different thicknesses (d = 6.4, 9.7, 14.5, and 18.5 nm) were deposited using a plasma-enhanced chemical vapor deposition technique (PECVD). For SiOx films with d >/= 18.5 nm, the electrochemical behavior is characteristic of a highly efficient barrier for a redox probe. SiOx films with thicknesses between 9.5 and 14.5 nm were found to be less efficient barriers for electron transfer. The Au/SiOx interface with 6.4 nm of SiOx, however, showed an enhanced steady-state current compared to that of the other films. The stability of this interface in solutions of different pH was investigated. Whereas a strongly basic solution led to a continuous dissolution of the SiOx interface, acidic treatment produced a more reticulated SiOx film and improved electrochemical behavior. The electrochemical results were corroborated by SPR measurements in real time and AFM studies.     

Nanomolar hydrogen peroxide detection using horseradish peroxidase covalently linked to undoped nanocrystalline diamond surfaces

In this article, we report on the low-level detection of hydrogen peroxide, a key player in the redox signaling pathway and a toxic product in the cellular system, using a colorimetric solution assay. Amine-terminated undoped nanocrystalline diamond thin films were grown on glass using a linear-antenna microwave plasma CVD process. The diamond surface consists mainly of -NH(2) termination. The aminated diamond surface was decorated with horseradish peroxidase (HRP) enzyme using carbodiimide coupling chemistry. The success of the HRP immobilization was confirmed by X-ray photoelectron spectroscopy (XPS). The enzymatic activity of immobilized HRP was determined with a colorimetric test based on the HRP-catalyzed oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sufonic acid (ABTS) in the presence of hydrogen peroxide. The surface coverage of active HRP was estimated to be Γ = 7.3 × 10(13) molecules cm(-2). The use of the functionalized diamond surface as an optical sensor for the detection of hydrogen peroxide with a detection limit of 35 nM was demonstrated.     

Distinction between surface hydroxyl and ether groups on boron-doped diamond electrodes using a chemical approach

While it is clearly established that oxidation of as-grown boron-doped diamond (BDD) interfaces results in the introduction of different surface oxygen functions such as ether, carbonyl and hydroxyl groups, there is no reported approach which can clearly distinguish between the different surface functions. For further surface functionalization, it is important to quantify the presence of each group on the diamond surface. In this paper, the presence and amount of surface hydroxyl groups is identified using esterification of the COH groups with trifluoroacetic acid. The presence of CF₃ group in the acid allowed the identification and estimation of the amount of surface hydroxyl groups using X-ray photoelectron spectroscopy (XPS).     

Application of thin titanium/titanium oxide layers deposited on gold for infrared reflection absorption spectroscopy: structural studies of lipid bilayers

Ultrathin titanium layers when deposited on the surface of gold can be successfully applied for infrared reflection absorption spectroscopy (IRRAS) investigations. It was shown that the reflectivity, the phase shift, and the mean square electric field of the p- and s-polarized IR radiation in up to 20 nm thick titanium layers covered with a 3-4 nm thick layer of native oxide are comparable to those of the air/gold interface. The surface selection rule is fulfilled. Thus, qualitative and quantitative analysis of 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) bilayers transferred in liquid expanded (LE) and liquid condensed (LC) states can be performed. Differences are found in the hydration state and molecular arrangement of the two investigated bilayers. In the DMPC bilayer in the LE state, the C-N bond in the positively charged choline moiety is inclined by approximately 70 degrees toward the surface of the negatively charged titanium substrate. In the phosphate moiety, the in-plane vector of the O-P-O group makes a small angle of approximately 15 degrees to the surface normal. This open structure of the lipid molecule corresponds to the B crystal structure of the DMPC molecule and provides space for strong hydration of the polar headgroup. In the DMPC bilayer in the LC state, the intermolecular distances are reduced; the C-N bond of the choline group makes a smaller angle to the surface normal, and the in-plane vector of the O-P-O group in the phosphate moiety displays a larger tilt. The degree of hydration is reduced. The arrangement of the polar headgroup region corresponds to the A crystal structure of the DMPC molecule.     

Copper-based metal–organic framework decorated by CuO hair-like nanostructures: Electrocatalyst for oxygen evolution reaction

We report a Cu-based metal–organic framework (MOF) decorated by CuO nanostructures as an efficient catalyst for the oxygen evolution reaction (OER). MIL-53(Cu) was synthesized by a hydrothermal approach using 1,4-bezenedicarboxylic acid as organic precursor and further annealed at 300°C to form CuO nanostructures on its surface. The produced electrocatalyst, CuO@MIL-53(Cu), was characterized using various techniques. Under alkaline conditions, the developed electrocatalyst exhibited an overpotential of 801 and 336 mV versus RHE at 10 and 1 mA cm⁻², respectively. The reproducibility of the catalytic performance was validated using several electrodes. It was confirmed that the CuO hair-like nanostructures grown on MIL-53(Cu) using thermal treatment exhibit high OER activity, good kinetics and durability. CuO@MIL-53(Cu) is an economic noble-metal-free OER electrocatalyst. It has potential for application as anode material for sustainable energy technologies like batteries, fuel cells and water electrolysis.     

Localized electropolymerization on oxidized boron-doped diamond electrodes modified with pyrrolyl units

This paper describes the functionalization of oxidized boron-doped diamond (BDD) electrodes with N-(3-trimethoxysilylpropyl)pyrrole (TMPP) and the influence of this layer on the electrochemical transfer kinetics as well as on the possibility of forming strongly adhesive polypyrrole films on the BDD interface through electropolymerization. Furthermore, localized polymer formation was achieved on the TMPP-modified BDD interface using the direct mode of a scanning electrochemical microscope (SECM) as well as an electrochemical scanning near-field optical microscope (E-SNOM). Depending on the method used polypyrrole dots with diameters in the range of 1-250 microm are electrogenerated.     

Preparation and characterization of thin films of SiO(x) on gold substrates for surface plasmon resonance studies

We report here on the fabrication and characterization of stable thin films of amorphous silica (SiO(x)) deposited on glass slides coated with a 5 nm adhesion layer of titanium and 50 nm of gold, using the plasma-enhanced chemical vapor deposition (PECVD) technique. The resulting surfaces were characterized using atomic force microscopy (AFM), ellipsometry, contact angle measurements, and surface plasmon resonance (SPR). AFM analysis indicates that homogeneous films of silica with low roughness were formed on the gold surface. The deposited silica films showed excellent stability in different solvents and in piranha solution. There was no significant variation in the thickness or in the SPR signal after these harsh treatments. The Au/SiO(x) interfaces were investigated for their potential applications as new surface plasmon resonance sensor chips. Silica films with thicknesses up to 40 nm allowed visualization of the surface plasmon effect, while thicker films resulted in the loss of the SPR characteristics. SPR allowed further the determination of the silica thickness and was compared to ellipsometric results. Chemical treatment of the SiO(x) film with piranha solution led to the generation of silanol surface groups that have been coupled with a trichlorosilane.     

Detection of carbohydrate-binding proteins by oligosaccharide-modified polypyrrole interfaces using electrochemical surface plasmon resonance

This paper reports on the use of electrochemical surface plasmon resonance (E-SPR) for the detection of carbohydrate-binding proteins. The generation of an SPR sensor specific to lectins Arachis hypogaea (PNA) and Maackia amurensis (MAA) is based on the electrochemical polymerization of oligosaccharide derivatives functionalized by pyrrole groups. The resulting thin conducting polymer films were characterized using E-SPR and atomic force microscopy (AFM). The specific binding of PNA to polypyrrole-lactosyl and of MAA to polypyrrole-3'-sialyllactosyl films was investigated using SPR. The detection limit was 41 nM for PNA and 83 nM for MAA. Through Scatchard analysis and linear transformation of the SPR sensorgram data, association (k(ass)) and dissociation rate constants (k(diss)) could be determined.     

PM IRRAS investigation of thin silica films deposited on gold. Part 1. Theory and proof of concept

Polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) was successfully used for the first time to characterize an optically transparent thin oxide film. SiO2 layers of 7 nm thickness were synthesized by plasma enhanced chemical vapor deposition (PECVD) on 200 nm thick gold covered glass slides. Despite the fact that silica is transparent and absorptive to IR radiation when deposited in the form of thin films on a gold surface, it preserves the high metallic reflectivity for the IR light. At grazing angles of incidence of the IR beam, the enhancement of the normal component of the electric field at the interface is comparable to that of Au alone. In addition, the analysis of the structure of a 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) lipid monolayer deposited using the Langmuir-Blodgett technique is demonstrated.     

Poly(dicarbazole-N-hydroxysuccinimide) film: a new polymer for the reagentless grafting of enzymes and redox mediators

Upon oxidative electropolymerisation of a new dicarbazole derivative functionalised by a N-hydroxysuccinimide group in acetonitrile, electroactive poly(dicarbazole) films were formed on electrodes. The subsequent chemical functionalisation of the poly(dicarbazole) film was easily performed by successive immersions in aqueous enzyme and mediator solutions. Investigations by cyclic voltammetry showed that thionine and toluidine blue o have been irreversible bound to the poly(dicarbazole) backbone. The amperometric responses of the poly(dicarbazole) films grafted with polyphenol oxidase (PPO) and thionine to catechol were then investigated at −0.2 V vs. SCE. The catechol sensitivity and the maximum current at saturating catechol concentrations were 14.57 mA M⁻¹cm⁻² and 15.43 μA cm⁻², respectively. The comparison of this catechol sensitivity with that of a poly(dicarbazole) film only modified with PPO (3.40 mA M⁻¹cm⁻²) highlighted the improvement of the biosensor performance brought by thionine as immobilised redox mediator.