Induced G phase through intermolecular hydrogen bonding: X. Crystallization kinetics study on two structural isomers

A comparative systematic crystallization kinetics study has been carried out on two distinct novel liquid crystalline isomers, DBA:R:DBA and DBA:H:DBA (where DBA = p-n-decyloxybenzoic acid, R = resorcinol and H = hydroquinone) using differential scanning calorimetry. The kinetics experiment is performed from the crystal G phase (kinetophase), which is a common induced phase in both compounds. The molecular mechanism and dimensionality of crystal growth are studied from the Avrami exponent n while the characteristic crystallization time (t ^*) at each crystallization temperature is deduced from the individual plots of log t vs. Δ H.     

Induced G phase through intermolecular hydrogen bonding: X. Crystallization kinetics study on two structural isomers

A comparative systematic crystallization kinetics study has been carried out on two distinct novel liquid crystalline isomers, DBA : R :DBA and DBA : H :DBA (where DBA = p-n-decyloxybenzoic acid, R =resorcinol and H =hydroquinone) using differential scanning calorimetry. The kinetics experiment is performed from the crystal G phase (kinetophase), which is a common induced phase in both compounds. The molecular mechanism and dimensionality of crystal growth are studied from the Avrami exponent n while the characteristic crystallization time (t*) at each crystallization temperature is deduced from the individual plots of log t vs. ΔH.     

Role of Daucus carota in Enhancing Antiulcer Profile of Pantoprazole in Experimental Animals

The carrot plant (Daucus carota) and its components are traditionally reported for the management of gastric ulcers. This study was performed to evaluate the role of carrot when administered concurrently with a conventional antiulcer treatment, pantoprazole, in alleviating gastric and duodenal ulcers in female experimental animals. The study involved standard animal models to determine the ulcer preventive effect using pylorus ligation, ethanol, and stress induced acute gastric ulcer models and duodenal ulcer models involving cysteamine. Acetic acid-induced chronic gastric ulcer and indomethacin-induced gastric ulcer models were used to evaluate the ulcer healing effect. Carrot fruit (500 mg/kg) and its co-administration with pantoprazole produced significant protection in an ethanol- and stress-induced acute gastric ulcer and cysteamine-induced duodenal ulcer. The healing of the acetic acid-induced chronic gastric ulcer was also augmented with this combination. Both total proteins and mucin contents were significantly increased in indomethacin-induced gastric ulcers. Similarly, in pylorus ligation, the pepsin content of gastric juice, total acidity, and free acidity were reduced. Overall, both ulcer preventive effects and ulcer healing properties of the pantoprazole were significantly enhanced in animals who received the co-administration of carrot fruit (500 mg/kg).     

Investigation of surface and thermogravimetric characteristics of carbon-coated iron nanopowder

Demand for high-density press and sinter components is increasing day by day. Of the different ways to improve the sinter density, the addition of nanopowder to the conventional micrometer-sized metal powder is an effective solution. The present investigation is aimed at studying the surface chemistry of iron nanopowder coated with graphitic carbon, which is intended to be mixed with the conventional iron powder. For this purpose, iron nanopowder in the size range of 30 nm to submicron (less than 1 micron) was investigated using thermogravimetry at different temperatures: 400°C, 600°C, 800°C, 1000°C, and 1350°C. The X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), and high-resolution scanning electron microscopy (HR-SEM) were used for characterizing the powder as well as samples sintered at different temperatures. The presence of iron, oxygen, carbon, chromium, and zinc were observed on the surface of the nanopowder. Iron was present in oxide state, although a small metallic iron peak at 707 eV was also observed in the XPS spectra obtained from the surface indicating the oxide scale to be maximum of about 5 nm in thickness. For the sample treated at 600°C, presence of manganese was observed on the surface. Thermogravimetry results showed a two-step mass loss with a total mass loss of 4 wt.% when heated to 1350°C where the first step corresponds to the surface oxide reduction.     

Anthracene-Fused Oligo-BODIPYs: A New Class of π-Extended NIR-Absorbing Materials

Large π-conjugated systems are key in the area of molecular materials. Herein, we prepare via Au^I-catalyzed cyclization a series of fully π-conjugated anthracene-fused oligo-BODIPYs. Their structural and optoelectronic properties were studied by several techniques, ranging from X-ray, UV/Vis, and cyclic voltammetry to transient absorption spectroscopy. As a complement, their electronic structures were explored by means of Density Functional Theory (DFT) calculations. Depending on the size and shape of the π-conjugated skeleton, unique features—such as face-to-face supramolecular organization, NIR absorption and fluorescence as well as strong electron accepting character—were noted. All in all, the aforementioned features render them valuable for technological applications.     

A regioselective multicomponent protocol for the synthesis of novel bioactive 4-hydroxyquinolin-2(1H)-one grafted monospiropyrrolidine and thiapyrrolizidine hybrids

An expedient route toward the synthesis of 4-hydroxyquinolone grafted spiropyrrolidines or pyrrolizidines has been accomplished through 1,3-dipolar cycloaddition reaction of various azomethine ylides derived from isatin or acenaphthalene and sarcosine with 4-hydroxyquinolone derivatives as dipolarophile. The regio and stereo chemical outcome of the cycloaddition reaction is ascertained by X-ray crystallographic studies and spectroscopic techniques of the cycloadducts. Furthermore, cytotoxicity evaluation of selected compounds showed significant inhibition of cell proliferation against cervical as well as colon cancer cell lines.     

Modeling the interface between islet amyloid polypeptide and insulin-based aggregation inhibitors: correlation to aggregation kinetics and membrane damage

Human islet amyloid polypeptide (hIAPP) forms cytotoxic fibrils in type-2 diabetes and insulin is known to inhibit formation of these aggregates. In this study, a series of insulin-based inhibitors were synthesized and assessed for their ability to slow aggregation and impact hIAPP-induced membrane damage. Computational studies were employed to examine the underlying mechanism of inhibition. Overall, all compounds were able to slow aggregation at sufficiently high concentrations (10× molar excess); however, only two peptides showed any inhibitory capability at the 1:1 molar ratio (EALYLV and VEALYLV). The results of density functional calculations suggest this is due to the strength of a salt bridge formed with the Arg11 side chain of hIAPP and the inhibitors' ability to span from the Arg11 to past the Phe15 residue of hIAPP, blocking one of the principal amyloidogenic regions of the molecule. Unexpectedly, slowing fibrillogenesis actually increased damage to lipid membranes, suggesting that the aggregation process itself, rather than the fibrilized peptide, may be the cause of cytotoxicity in vivo.     

Simple replication methods for producing nanoslits in thermoplastics and the transport dynamics of double-stranded DNA through these slits

Mixed-scale nano- and microfluidic networks were fabricated in thermoplastics using simple and robust methods that did not require the use of sophisticated equipment to produce the nanostructures. High-precision micromilling (HPMM) and photolithography were used to generate mixed-scale molding tools that were subsequently used for producing fluidic networks into thermoplastics such as poly(methyl methacrylate), PMMA, cyclic olefin copolymer, COC, and polycarbonate, PC. Nanoslit arrays were imprinted into the polymer using a nanoimprinting tool, which was composed of an optical mask with patterns that were 2-7 μm in width and a depth defined by the Cr layer (100 nm), which was deposited onto glass. The device also contained a microchannel network that was hot embossed into the polymer substrate using a metal molding tool prepared via HPMM. The mixed-scale device could also be used as a master to produce a polymer stamp, which was made from polydimethylsiloxane, PDMS, and used to generate the mixed-scale fluidic network in a single step. Thermal fusion bonding of the cover plate to the substrate at a temperature below their respective T(g) was accomplished by oxygen plasma treatment of both the substrate and cover plate, which significantly reduced thermally induced structural deformation during assembly: ～6% for PMMA and ～9% for COC nanoslits. The electrokinetic transport properties of double-stranded DNA (dsDNA) through the polymeric nanoslits (PMMA and COC) were carried out. In these polymer devices, the dsDNA demonstrated a field-dependent electrophoretic mobility with intermittent transport dynamics. DNA mobilities were found to be 8.2 ± 0.7 × 10(-4) cm(2) V(-1) s(-1) and 7.6 ± 0.6 × 10(-4) cm(2) V(-1) s(-1) for PMMA and COC, respectively, at a field strength of 25 V cm(-1). The extension factors for λ-DNA were 0.46 in PMMA and 0.53 in COC for the nanoslits (2-6% standard deviation).     

Photoactive preorganized subphthalocyanine-based molecular tweezers for selective complexation of fullerenes

The development of new chromophoric receptors capable of binding curved carbon nanostructures is central to the quest for improved fullerene-based organic photovoltaics. We herein report the synthesis and characterization of a subphthalocyanine-based multicomponent ensemble consisting of two electron-rich SubPc-monomers rigidly attached to the convex surface of an electron-poor SubPc-dimer. Such a unique configuration, especially in terms of the two SubPc-monomers, together with the overall stiffness of the linker, endows the multicomponent system with a well-defined tweezer-like topology to efficiently embrace a fullerene in its inner cavity. The formation of a 1 : 1 complex was demonstrated in a variety of titration studies with either C60 or C70. In solution, the underlying association constants were of the order of 10⁵ M⁻¹. Detailed physicochemical experiments revealed a complex scenario of energy- and electron-transfer processes upon photoexcitation in the absence and presence of fullerenes. The close proximity of the fullerenes to the electron-rich SubPcs enables a charge shift from the initially formed reduced SubPc-dimer to either C60 to C70.

A tweezer-like subphthalocyanine-based ensemble has been developed for the selective recognition of fullerenes. The physicochemical properties of both the photoactive receptor and its inclusion complexes with fullerenes have been investigated.