A facile synthesis of oxazines by indium-induced reduction-rearrangement of the nitro β-lactams

An indium-induced reduction-rearrangement reaction of nitro-substituted β-lactams has been used for facile synthesis of oxazines in aqueous ethanol.     

Reversed phase chromatographic separation of zirconium,niobium and hafnium tracers with HDEHP

Effective separation of the congeneric pair of elements, zirconium and hafnium and also niobium which was in admixtures with zirconium as daughter in its isotopic form were achieved through reversed phase column and paper extraction chromatographic procedures using di-(2-ethylhexyl)phosphoric acid (HDEHP) as the liquid exchanger. In reversed phase column chromatographic separation, the tracers,⁹⁵Zr,⁹⁵Nb and^175,181Hf, were extracted by HDEHP impregnated on kieselguhr and were sequentially eluted with 6N H₂SO₄+xN oxalic acid+H₂O₂(where x=0.1, 0.5 and 2). Similarly, in reversed phase paper chromatographic study in which a coating of HDEHP on Whatman No. 1 chromatographic paper was used as stationary phase, the mobile phase, 18N H₂SO₄+0.1N oxalic acid + H₂O₂, helped in separating the elements with favorable separation factors. Under the optimal conditions, the separation and decontamination of the elements in both methods were found to be quantitative, as verified by -spectrometric studies.     

Polyether azomethines. I. Synthesis and characterization

Six new polyether azomethines were synthesized by melt and solution polycondensation of six different diamines with 4,4′-[1,4-phenylene bis(oxy)] bisbenzaldehyde. The polymers synthesized by solution method are yellow to white in color and had inherent viscosities up to 0.59 dL/g in concentrated H₂SO₄. The polymers obtained by melt condensation show higher viscosity. Except polymer IV , others are insoluble in common organic solvents. The polymers were characterized by IR, x-ray, elemental analysis, and DSC study. The thermal stability of the polymers was evaluated by TGA and IGA study. Polymers I-III are highly thermally and thermooxidatively stable and exhibit no appreciable decomposition up to 420°C both in air and nitrogen atmosphere. It was shown that the curing of the polyazo-methines takes place by opening up of the ? CH?N? linkages at higher temperature. The electrical conductivities of the virgin and iodine doped polymers were as high as 10^?11?10^?16 and 10^?6?10^?8S cm^?1, respectively, at 30°C. Electronic spectra of the undoped polymers ( I-III ) indicated a large bathochromic shift of the ? – ?^* absorptions band (376 nm) due to ? C?N? bonds of the model compound. This can be attributed to extensive delocalization of the electrons along the polymer chain. © 1995 John Wiley & Sons, Inc.     

Oxomolybdenum(VI) and (IV) complexes of pyrazole derived ONO donor ligands – synthesis,crystal structure studies and spectroelectrochemical correlation

Four cis-dioxomolybdenum complexes of general formula [MoO₂(Lⁿ)EtOH] (n = 1–4) and one oxomolybdenum(IV) complex [MoO(L⁴)EtOH], with potentially tridentate Schiff bases derived from 5-methyl pyrazole-3-carbohydrazide and salicylaldehyde/substituted salicylaldehyde/o-hydroxy acetophenone have been prepared. The Mo(IV) complex is derived from the Mo(VI) dioxo complex by oxotransfer reaction with PPh₃. The complexes are characterized by elemental analysis, electronic spectra, IR, ¹H NMR, and by cyclic voltammetry. All the Mo(VI) species are crystallographically characterized. The complexes have a distorted octahedral structure in which the ligand behaves as a binegative donor one, leaving the pyrazole –N uncoordinated towards the metal center. It is also revealed from the crystal structure that the Mo(VI) center enjoys an NO₅ donor environment.     

Time-dependent quantum wave-packet description of the 1pi sigma* photochemistry of phenol

The photoinduced hydrogen elimination reaction in phenol via the conical intersections of the dissociative 1pi sigma* state with the 1pi pi* state and the electronic ground state has been investigated by time-dependent quantum wave-packet calculations. A model including three intersecting electronic potential-energy surfaces (S0, 1pi sigma*, and 1pi pi*) and two nuclear degrees of freedom (OH stretching and OH torsion) has been constructed on the basis of accurate ab initio multireference electronic-structure data. The electronic population transfer processes at the conical intersections, the branching ratio between the two dissociation channels, and their dependence on the initial vibrational levels have been investigated by photoexciting phenol from different vibrational levels of its ground electronic state. The nonadiabatic transitions between the excited states and the ground state occur on a time scale of a few tens of femtoseconds if the 1pi pi*-1pi sigma* conical intersection is directly accessible, which requires the excitation of at least one quantum of the OH stretching mode in the 1pi pi* state. It is shown that the node structure, which is imposed on the nuclear wave packet by the initial preparation as well as by the transition through the first conical intersection (1pi pi*-1pi sigma*), has a profound effect on the nonadiabatic dynamics at the second conical intersection (1pi sigma*-S0). These findings suggest that laser control of the photodissociation of phenol via IR mode-specific excitation of vibrational levels in the electronic ground state should be possible.     

A scheme for sequential separation of thorium,lanthanides, uranium in geo-materials and their ICP-OES determination

Journal of Radioanalytical and Nuclear Chemistry - Neutral complexes of thorium and lanthanides with 2,3-dihydroxynaphthalene and anionic complexes of uranium with the same chelating agent in...     

Structural,electronic, and mechanical properties of cubic TiO_2:A first-principles study

We present an analysis of structural, electronic, and mechanical properties of cubic titanium dioxide(TiO_2) using an all electron orthogonalzed linear combinations of atomic orbitals(OLCAO) basis set under the framework of density functional theory(DFT). The structural property, especially the lattice constant a, and the electronic properties such as the band diagram and density of states(DOS) are studied and analyzed. The mechanical properties such as bulk moduli, shear moduli, Young's Moduli, and Poison's ratio are also investigated thoroughly. The calculations are carried out on shear moduli and anisotropy factor for cubic TiO_2. The Vickers hardness is also tested for fluorite and pyrite cubic-structured TiO_2. Furthermore, the results are compared with the previous theoretical and experimental results. It is found that DFTbased simulation produces results which are approximation to experimental results, whereas the calculated elastic constants are better than the previous theoretical and experimental values.     

Synthesis of New Poly(biphenylene oxide) with Pendent Trifluoromethyl Group

A new AB type of monomer 4′-fluoro-3,5-dimethyl-3′-trifluoromethyl-biphenyl-4-ol has been synthesized that leads to a new poly(arylene ether) by self polycondensation reaction. The monomer and the polymer have been well characterized by elemental analyses, FT-IR and NMR spectroscopy. Both FT-IR and NMR spectra of the polymers did not show any terminal phenoxy group indicating high conversion. The polymer showed glass transition at 278°C and very good thermal stability in synthetic air. GPC results indicate high molar mass development; Mw = 53200 and MWD = 2.29.     

New Fluorinated Poly(imide siloxane) Random and Block Copolymers with Variation of Siloxane Loading

Several new random and block copoly(imide siloxane)s have been prepared by the solution polycondensation of commercially available 4,4′-oxydianiline (ODA) and amino-propyl terminated polydimethylsiloxane (APPS) with 4,4′-(hexafluoro-isopropylidene)diphthalic anhydride (6FDA). The siloxane loading was kept to 10, 20, 30, 40 and 50 wt% in the copolymers. The random copolymers were prepared by a one pot solution imidization technique, and two pot solution imidization technique was adopted for the synthesis of the block copolymers. The diamine ODA and the dianhydride 6FDA composed the hard block segment, while APPS and 6FDA composed the soft block segment. The hard block length was kept constant while the soft block lengths were varied by varying the siloxane loading. Accordingly, block copoly(imide siloxane)s were prepared on increasing the soft block lengths (DP) from 3 to 6, 10, 18 and 36 for fixed hard block length of 22. The resulting polymers have been well characterized by IR, NMR and GPC techniques. Thermal and mechanical properties of the random and block copolymers were compared with the already reported homopolyimide without siloxane moiety.     

Proton transfer rate‐equilibria in apolar aprotic solvents: a historical perspective

Low dielectric constant apolar aprotic solvents, although employed on a limited scale for studying proton transfer reactions as compared with commonly used polar protic or dipolar aprotic ones, offer some particular advantages, namely, specific solute–solvent interactions are virtually eliminated and proton transfer occurs directly in an apolar aprotic solvent. An intriguing feature of these reactions is their general acid‐catalyzed/base‐catalyzed kinetics with a time scale over microseconds to minutes. In fact, the true or intrinsic relative strengths of acids/bases when measured in such solvents come to the fore much more clearly than those obtained in other classes of solvents. Recently, a review documenting the post‐1980 developments relating to proton transfer reactions in apolar aprotic solvents has been published. The present article is a commentary of the pre‐1980 developments in this area since the 1920s Brønsted–Lowry's “proton cult” of acid–base theory. Copyright © 2016 John Wiley & Sons, Ltd.