Solution‐processable and thermally cross‐linkable fluorene‐cored triple‐triphenylamines with terminal vinyl groups to enhance electroluminescence of MEH‐PPV: Synthesis,curing, and optoelectronic properties

This study reports the synthesis, curing, and optoelectronic properties of a solution‐processable, thermally cross‐linkable electron‐ and hole‐blocking material containing fluorene‐core and three periphery N‐phenyl‐N‐(4‐vinylphenyl)benzeneamine ( FTV ). The FTV exhibited good thermal stability with T_d above 478 °C in nitrogen atmosphere. The FTV is readily cross‐linked via terminal vinyl groups by heating at 160 °C for 30 min to obtain homogeneous film with excellent solvent resistance. Multilayer PLED device [ITO/PEDOT:PSS/cured‐ FTV /MEH‐PPV/Ca (50 nm)/Al (100 nm)] was successfully fabricated using solution processed. Inserting cured‐ FTV is between PEDOT:PSS and MEH‐PPV results in simultaneous reduction in hole injection from PEDOT:PSS to MEH‐PPV and blocking in electron transport from MEH‐PPV to anode. The maximum luminance and maximum current efficiency were enhanced from 1810 and 0.27 to 4640 cd/m² and 1.08 cd/A, respectively, after inserting cured‐ FTV layer. Current results demonstrate that the thermally cross‐linkable FTV enhances not only device efficiency but also film homogeneity after thermal curing. FTV is a promising electron‐ and hole‐blocking material applicable for the fabrication of multilayer PLEDs based on PPV derivatives. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012     

Analysis of the ketosynthase-chain length factor heterodimer from the fredericamycin polyketide synthase

The pentadecaketide fredericamycin has the longest carbon chain backbone among polycyclic aromatic polyketide antibiotics whose biosynthetic genes have been sequenced. This backbone is synthesized by the bimodular fdm polyketide synthase (PKS). Here, we demonstrate that the bimodular fdm PKS as well as its elongation module alone synthesize undecaketides and dodecaketides. Thus, unlike other homologs, the fdm ketosynthase-chain length factor (KS-CLF) heterodimer does not exclusively control the backbone length of its natural product. Using sequence- and structure-based approaches, 48 CLF multiple mutants were engineered and analyzed. Unexpectedly, the I134F mutant was unable to turn over but could initiate and partially elongate the polyketide chain. This unprecedented mutant suggests that the KS-CLF heterodimer harbors an as yet uncharacterized chain termination mechanism. Together, our findings reveal fundamental mechanistic differences between the fdm PKS and its well-studied homologs.     

A Solution‐Processed Air‐Stable Perylene Diimide Derivative for N‐type Organic Thin Film Transistors

For future all‐soluble organic thin film transistor (OTFT) applications, a new soluble n‐type air‐stable perylene diimide derivative semiconductor material with (trifluoromethyl)benzyl groups (TC–PDI–F) is synthesized. The film is formed by spin‐coating in air and optimized for OTFT fabrications. The transistor characteristics and air‐stability of the TC–PDI–F OTFTs is measured to investigate the feasibility of using solution‐processed TC–PDI–F for future OTFT applications. For all‐solution OTFT process applications, the transistor characteristics are demonstrated by using TC–PDI–F as an n‐type semiconductor material and liquid‐phase‐deposited SiO₂ (LPD–SiO₂) as a gate dielectric material. All processes (except material synthesis and electrode deposition) and electrical measurements are conducted in air.     

The effect of inertia on the intrinsic viscosity of polymers

For the model of an elastic dumbbell, i.e., two beads connected by a Hookean spring, the Langevin equations for the beads are formulated. It is taken into account that the friction force contains terms resulting from the inertia of the liquid. The contribution of the dumbbell to the viscosity is calculated from the rate of energy dissipation. When the inertia of the liquid is neglected, the viscosity contribution reduces to Kramers' result and is independent of the mass of the beads. When the inertia terms are added, the result is nearly independent of this mass, but shows a dependence on the density of the liquid. In liquids of low viscosity, the extra term resulting from the inertia may be as large as 25% of the total viscosity contribution.     

Design and construction of a compact end-station at NSRRC for circular-dichroism spectra in the vacuum-ultraviolet region

A synchrotron‐radiation‐based circular‐dichroism end‐station has been implemented at beamline BL04B at the National Synchrotron Radiation Research Center (NSRRC) in Taiwan for biological research. The design and performance of this compact end‐station for measuring circular‐dichroism spectra in the vacuum‐ultraviolet region are described. The linearly polarized light from the beamline is converted to modulated circularly polarized light with a LiF photoelastic modulator to provide a usable wavelength region of 130–330 nm. The light spot at the sample position is 5 mm × 5 mm at a slit width of 300 µm and provides a flux greater than 1 × 10¹¹ photons s^?1 (0.1% bandwidth)^?1. A vacuum‐compatible cell made of two CaF₂ windows has a variable path length from 1.3 µm to 1 mm and a temperature range of 253–363 K. Measured CD spectra of (1S)‐(+)‐10‐camphorsulfonic acid and proteins demonstrated the ability of this system to extend the wavelength down to 172 nm in aqueous solution and 153 nm in hexafluoro‐2‐propanol.     

Structures and Magnetic Properties of Two Copper(II) Complexes with 2,5‐Dichloro‐3,6‐Dihydroxy‐1,4‐Benzoquinone Dianionic and Tetrachloroquinone Ligand

The polynuclear copper(II) complex [Cu₂(Hdpa)₂(μ‐ClDHBQ)(ClO₄)₂]_n, 1 is bridged by ClDHBQ^?2 (2,5‐dichloro‐3,6‐dihydroxy‐1,4‐benzoquinone dianionic) and 2,2′‐dipyridylamine (Hdpa). In the axial position, Cu is connected with the oxygen atom of ClO. The perchlorate anion may be envisaged as a monodentate O‐bound ligand. Through the bond bridge of O–Cu … O–Cl, the binuclear compound [Cu₂(Hdpa)₂(μ‐ClDHBQ)(ClO₄)₂] is strung together into a long chain compound. Tetrachlorocatechol underwent partial oxidation/hydrolysis/dechlorination processes to produce ClDHBQ^?2. The other mononuclear complex [Cu(Hdpa)(TeCQ)](DMF), 2 , in which tetrachloroquinone (TeCQ) was produced by oxidation of tetrachlorocatechol (TeCC), therefore complex 2 is in the quinone form. The magnetic susceptibility measurements show antiferromagnetic coupling with J = ?11.9 cm^?1, θ = 2.6 K, and g = 2.05 for complex 1. Complex 2 exhibits the typical paramagnetic behavior of s = 1/2.     

Amperometric Sensor for Detection of the Reduced Form of Nicotinamide Adenine Dinucleotide Using a Poly(pyronin B) Film Modified Electrode

An electrochemical method for the preparation of poly(pyronin B) film was proposed in this paper. A poly(pyronin B) (poly(PyB)) film modified glassy carbon electrode (GCE) has been fabricated via an electrochemical oxidation procedure and applied to the electrocatalytic oxidation of reduced form of nicotinamide adenine dinucleotide (NADH). The poly(PyB) film modified electrode surface has been characterized by atomic force microscope (AFM), scanning electron microscope (SEM), electrochemical impedance spectroscopy (EIS), UV‐visible absorption spectrophotometry (UV‐vis) and cyclic voltammetry (CV). These studies have been used to investigate the poly(PyB) film, which demonstrates the formation of the polymer film and the excellent electroactivity of poly(PyB) in neutral and even in alkaline media. Due to its potent catalytic effects towards the electrooxidation of NADH at lower potential (0.0 V), poly(PyB) film modified electrode can be used for the selective determination of NADH in real samples because of dopamine, ascorbic acid and uric acid oxidation can be avoided at this potential. The catalytic peak currents are linearly dependent on the concentrations of NADH in the range of 1.0×10^?6 to 5.0×10^?4 mol/L with correlation coefficients of 0.999. The detection limits for NADH is 0.5×10^?6 mol/L. Poly(PyB) modified electrode also shows good stability and reproducibility due to the irreversible attachment of polymer film at GCE surface.     

Dibromomethane as one-carbon source in organic synthesis: microwave-accelerated α-methylenation of ketones with dibromomethane and diethylamine

The reactivity of aryl alkyl ketone with a preheated mixture of dibromomethane and diethylamine is poor and gives an α-methylenation product in very low yield even under refluxing condition. It can be accelerated dramatically by microwave irradiation. Under microwave condition, the cyclic 1,3-dicarbonyls, aryl alkyl ketones, heteroaryl alkyl ketones and acyclic benzyl ketone give α-methylenation products in modest to good yields.